diff options
Diffstat (limited to 'runtime/doc/index.txt')
| -rw-r--r-- | runtime/doc/index.txt | 62 |
1 files changed, 29 insertions, 33 deletions
diff --git a/runtime/doc/index.txt b/runtime/doc/index.txt index 7f3ef20762..a6aa036b55 100644 --- a/runtime/doc/index.txt +++ b/runtime/doc/index.txt @@ -13,7 +13,6 @@ to look for deleting something, use: "/delete". For an overview of options see |option-list|. For an overview of built-in functions see |functions|. For a list of Vim variables see |vim-variable|. -For a complete listing of all help items see |help-tags|. Type |gO| to see the table of contents. @@ -21,7 +20,7 @@ For a complete listing of all help items see |help-tags|. 1. Insert mode *insert-index* tag char action in Insert mode ~ ------------------------------------------------------------------------ +------------------------------------------------------------------------------ ~ |i_CTRL-@| CTRL-@ insert previously inserted text and stop insert |i_CTRL-A| CTRL-A insert previously inserted text @@ -61,7 +60,7 @@ tag char action in Insert mode ~ |i_CTRL-Q| CTRL-Q same as CTRL-V, unless used for terminal control flow |i_CTRL-SHIFT-Q| CTRL-SHIFT-Q {char} - like CTRL-Q unless |modifyOtherKeys| is active + like CTRL-Q unless |tui-modifyOtherKeys| is active |i_CTRL-R| CTRL-R {register} insert the contents of a register |i_CTRL-R_CTRL-R| CTRL-R CTRL-R {register} @@ -79,7 +78,7 @@ tag char action in Insert mode ~ line |i_CTRL-V| CTRL-V {char} insert next non-digit literally |i_CTRL-SHIFT-V| CTRL-SHIFT-V {char} - like CTRL-V unless |modifyOtherKeys| is active + like CTRL-V unless |tui-modifyOtherKeys| is active |i_CTRL-V_digit| CTRL-V {number} insert three digit decimal number as a single byte. |i_CTRL-W| CTRL-W delete word before the cursor @@ -184,7 +183,7 @@ SECTION a section that possibly starts with '}' instead of '{' note: 1 = cursor movement command; 2 = can be undone/redone tag char note action in Normal mode ~ ------------------------------------------------------------------------------- +------------------------------------------------------------------------------ ~ CTRL-@ not used |CTRL-A| CTRL-A 2 add N to number at/after cursor |CTRL-B| CTRL-B 1 scroll N screens Backwards @@ -454,14 +453,14 @@ tag char note action in Normal mode ~ |<S-Up>| <S-Up> 1 same as CTRL-B |<Undo>| <Undo> 2 same as "u" |<Up>| <Up> 1 same as "k" -|<ScrollWheelDown>| <ScrollWheelDown> move window three lines down -|<S-ScrollWheelDown>| <S-ScrollWheelDown> move window one page down -|<ScrollWheelUp>| <ScrollWheelUp> move window three lines up -|<S-ScrollWheelUp>| <S-ScrollWheelUp> move window one page up -|<ScrollWheelLeft>| <ScrollWheelLeft> move window six columns left -|<S-ScrollWheelLeft>| <S-ScrollWheelLeft> move window one page left -|<ScrollWheelRight>| <ScrollWheelRight> move window six columns right -|<S-ScrollWheelRight>| <S-ScrollWheelRight> move window one page right +*<ScrollWheelDown>* <ScrollWheelDown> move window three lines down +*<S-ScrollWheelDown>* <S-ScrollWheelDown> move window one page down +*<ScrollWheelUp>* <ScrollWheelUp> move window three lines up +*<S-ScrollWheelUp>* <S-ScrollWheelUp> move window one page up +*<ScrollWheelLeft>* <ScrollWheelLeft> move window six columns left +*<S-ScrollWheelLeft>* <S-ScrollWheelLeft> move window one page left +*<ScrollWheelRight>* <ScrollWheelRight> move window six columns right +*<S-ScrollWheelRight>* <S-ScrollWheelRight> move window one page right ============================================================================== 2.1 Text objects *objects* @@ -469,7 +468,7 @@ tag char note action in Normal mode ~ These can be used after an operator or in Visual mode to select an object. tag command action in op-pending and Visual mode ~ ------------------------------------------------------------------------------- +------------------------------------------------------------------------------ ~ |v_aquote| a" double quoted string |v_a'| a' single quoted string |v_a(| a( same as ab @@ -511,7 +510,7 @@ tag command action in op-pending and Visual mode ~ 2.2 Window commands *CTRL-W* tag command action in Normal mode ~ ------------------------------------------------------------------------------- +------------------------------------------------------------------------------ ~ |CTRL-W_CTRL-B| CTRL-W CTRL-B same as "CTRL-W b" |CTRL-W_CTRL-C| CTRL-W CTRL-C same as "CTRL-W c" |CTRL-W_CTRL-D| CTRL-W CTRL-D same as "CTRL-W d" @@ -609,7 +608,7 @@ tag command action in Normal mode ~ 2.3 Square bracket commands *[* *]* tag char note action in Normal mode ~ ------------------------------------------------------------------------------- +------------------------------------------------------------------------------ ~ |[_CTRL-D| [ CTRL-D jump to first #define found in current and included files matching the word under the cursor, start searching at beginning of @@ -699,8 +698,8 @@ tag char note action in Normal mode ~ 2.4 Commands starting with 'g' *g* tag char note action in Normal mode ~ ------------------------------------------------------------------------------- -|g_CTRL-A| g CTRL-A dump a memory profile +------------------------------------------------------------------------------ ~ +g_CTRL-A g CTRL-A dump a memory profile |g_CTRL-G| g CTRL-G show information about current cursor position |g_CTRL-H| g CTRL-H start Select block mode @@ -802,7 +801,7 @@ tag char note action in Normal mode ~ 2.5 Commands starting with 'z' *z* tag char note action in Normal mode ~ ------------------------------------------------------------------------------- +------------------------------------------------------------------------------ ~ |z<CR>| z<CR> redraw, cursor line to top of window, cursor on first non-blank |zN<CR>| z{height}<CR> redraw, make window {height} lines high @@ -876,7 +875,7 @@ tag char note action in Normal mode ~ These can be used after an operator, but before a {motion} has been entered. tag char action in Operator-pending mode ~ ------------------------------------------------------------------------ +------------------------------------------------------------------------------ ~ |o_v| v force operator to work charwise |o_V| V force operator to work linewise |o_CTRL-V| CTRL-V force operator to work blockwise @@ -888,7 +887,7 @@ Most commands in Visual mode are the same as in Normal mode. The ones listed here are those that are different. tag command note action in Visual mode ~ ------------------------------------------------------------------------------- +------------------------------------------------------------------------------ ~ |v_CTRL-\_CTRL-N| CTRL-\ CTRL-N stop Visual mode |v_CTRL-\_CTRL-G| CTRL-\ CTRL-G go to Normal mode |v_CTRL-A| CTRL-A 2 add N to number in highlighted text @@ -1008,7 +1007,7 @@ Normal characters are inserted at the current cursor position. file names, tags, commands etc. as appropriate. tag command action in Command-line editing mode ~ ------------------------------------------------------------------------------- +------------------------------------------------------------------------------ ~ CTRL-@ not used |c_CTRL-A| CTRL-A do completion on the pattern in front of the cursor and insert all matches @@ -1111,23 +1110,23 @@ to terminal mode. You found it, Arthur! *holy-grail* ============================================================================== -6. EX commands *ex-cmd-index* *:index* +6. EX commands *ex-commands* *ex-cmd-index* *:index* This is a brief but complete listing of all the ":" commands, without mentioning any arguments. The optional part of the command name is inside []. The commands are sorted on the non-optional part of their name. tag command action ~ ------------------------------------------------------------------------------- +------------------------------------------------------------------------------ ~ |:| : nothing |:range| :{range} go to last line in {range} |:!| :! filter lines or execute an external command |:!!| :!! repeat last ":!" command |:#| :# same as ":number" |:&| :& repeat last ":substitute" -|:star| :* execute contents of a register +|:star| :* use the last Visual area, like :'<,'> |:<| :< shift lines one 'shiftwidth' left -|:=| := print the cursor line number +|:=| := print the last line number |:>| :> shift lines one 'shiftwidth' right |:@| :@ execute contents of a register |:@@| :@@ repeat the previous ":@" @@ -1209,8 +1208,8 @@ tag command action ~ |:cgetfile| :cg[etfile] read file with error messages |:changes| :changes print the change list |:chdir| :chd[ir] change directory -|:checkhealth| :checkh[ealth] run healthchecks -|:checkpath| :che[ckpath] list included files +|:checkhealth| :che[ckhealth] run healthchecks +|:checkpath| :checkp[ath] list included files |:checktime| :checkt[ime] check timestamp of loaded buffers |:chistory| :chi[story] list the error lists |:clast| :cla[st] go to the specified error, default last one @@ -1240,8 +1239,6 @@ tag command action ~ |:cpfile| :cpf[ile] go to last error in previous file |:cquit| :cq[uit] quit Vim with an error code |:crewind| :cr[ewind] go to the specified error, default first one -|:cscope| :cs[cope] execute cscope command -|:cstag| :cst[ag] use cscope to jump to a tag |:cunmap| :cu[nmap] like ":unmap" but for Command-line mode |:cunabbrev| :cuna[bbrev] like ":unabbrev" but for Command-line mode |:cunmenu| :cunme[nu] remove menu for Command-line mode @@ -1313,7 +1310,6 @@ tag command action ~ |:grepadd| :grepa[dd] like :grep, but append to current list |:gui| :gu[i] start the GUI |:gvim| :gv[im] start the GUI -|:hardcopy| :ha[rdcopy] send text to the printer |:help| :h[elp] open a help window |:helpclose| :helpc[lose] close one help window |:helpgrep| :helpg[rep] like ":grep" but searches help files @@ -1321,6 +1317,7 @@ tag command action ~ |:highlight| :hi[ghlight] specify highlighting methods |:hide| :hid[e] hide current buffer for a command |:history| :his[tory] print a history list +|:horizontal| :hor[izontal] following window command work horizontally |:insert| :i[nsert] insert text |:iabbrev| :ia[bbrev] like ":abbrev" but for Insert mode |:iabclear| :iabc[lear] like ":abclear" but for Insert mode @@ -1365,7 +1362,6 @@ tag command action ~ |:lcd| :lc[d] change directory locally |:lchdir| :lch[dir] change directory locally |:lclose| :lcl[ose] close location window -|:lcscope| :lcs[cope] like ":cscope" but uses location list |:ldo| :ld[o] execute command in valid location list entries |:lfdo| :lfd[o] execute command in each file in location list |:left| :le[ft] left align lines @@ -1546,7 +1542,6 @@ tag command action ~ buffer list |:scriptnames| :scr[iptnames] list names of all sourced Vim scripts |:scriptencoding| :scripte[ncoding] encoding used in sourced Vim script -|:scscope| :scs[cope] split window and execute cscope command |:set| :se[t] show or set options |:setfiletype| :setf[iletype] set 'filetype', unless it was set already |:setglobal| :setg[lobal] show global values of options @@ -1637,6 +1632,7 @@ tag command action ~ |:topleft| :to[pleft] make split window appear at top or far left |:tprevious| :tp[revious] jump to previous matching tag |:trewind| :tr[ewind] jump to first matching tag +|:trust| :trust add or remove file from trust database |:try| :try execute commands, abort on error or exception |:tselect| :ts[elect] list matching tags and select one |:tunmap| :tunma[p] like ":unmap" but for |Terminal-mode| |