diff options
Diffstat (limited to 'runtime/doc/options.txt')
| -rw-r--r-- | runtime/doc/options.txt | 85 |
1 files changed, 58 insertions, 27 deletions
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt index dbc87a8676..ebb2f28fa5 100644 --- a/runtime/doc/options.txt +++ b/runtime/doc/options.txt @@ -49,9 +49,12 @@ achieve special effects. These options come in three forms: :se[t] {option}&vi Reset option to its Vi default value. :se[t] {option}&vim Reset option to its Vim default value. -:se[t] all& Set all options, except terminal options, to their - default value. The values of 'lines' and 'columns' - are not changed. +:se[t] all& Set all options to their default value. The values of + these options are not changed: + 'columns' + 'encoding' + 'lines' + Warning: This may have a lot of side effects. *:set-args* *E487* *E521* :se[t] {option}={value} or @@ -704,7 +707,8 @@ A jump table for the options with a short description can be found at |Q_op|. line. When 'smartindent' or 'cindent' is on the indent is changed in a different way. - The 'autoindent' option is reset when the 'paste' option is set. + The 'autoindent' option is reset when the 'paste' option is set and + restored when 'paste' is reset. {small difference from Vi: After the indent is deleted when typing <Esc> or <CR>, the cursor position when moving up or down is after the deleted indent; Vi puts the cursor somewhere in the deleted indent}. @@ -2273,6 +2277,8 @@ A jump table for the options with a short description can be found at |Q_op|. <Tab>. Spaces are used in indents with the '>' and '<' commands and when 'autoindent' is on. To insert a real tab when 'expandtab' is on, use CTRL-V<Tab>. See also |:retab| and |ins-expandtab|. + This option is reset when the 'paste' option is set and restored when + the 'paste' option is reset. *'exrc'* *'ex'* *'noexrc'* *'noex'* 'exrc' 'ex' boolean (default off) @@ -3404,7 +3410,7 @@ A jump table for the options with a short description can be found at |Q_op|. global Ignore case in search patterns. Also used when searching in the tags file. - Also see 'smartcase'. + Also see 'smartcase' and 'tagcase'. Can be overruled by using "\c" or "\C" in the pattern, see |/ignorecase|. @@ -4517,19 +4523,21 @@ A jump table for the options with a short description can be found at |Q_op|. When the 'paste' option is switched on (also when it was already on): - mapping in Insert mode and Command-line mode is disabled - abbreviations are disabled - - 'textwidth' is set to 0 - - 'wrapmargin' is set to 0 - 'autoindent' is reset - - 'smartindent' is reset - - 'softtabstop' is set to 0 + - 'expandtab' is reset + - 'formatoptions' is used like it is empty - 'revins' is reset - 'ruler' is reset - 'showmatch' is reset - - 'formatoptions' is used like it is empty + - 'smartindent' is reset + - 'smarttab' is reset + - 'softtabstop' is set to 0 + - 'textwidth' is set to 0 + - 'wrapmargin' is set to 0 These options keep their value, but their effect is disabled: - - 'lisp' - - 'indentexpr' - 'cindent' + - 'indentexpr' + - 'lisp' NOTE: When you start editing another file while the 'paste' option is on, settings from the modelines or autocommands may change the settings again, causing trouble when pasting text. You might want to @@ -4852,7 +4860,8 @@ A jump table for the options with a short description can be found at |Q_op|. Inserting characters in Insert mode will work backwards. See "typing backwards" |ins-reverse|. This option can be toggled with the CTRL-_ command in Insert mode, when 'allowrevins' is set. - NOTE: This option is reset when 'paste' is set. + This option is reset when 'paste' is set and restored when 'paste' is + reset. *'rightleft'* *'rl'* *'norightleft'* *'norl'* 'rightleft' 'rl' boolean (default off) @@ -4901,7 +4910,8 @@ A jump table for the options with a short description can be found at |Q_op|. separated with a dash. For an empty line "0-1" is shown. For an empty buffer the line number will also be zero: "0,0-1". - This option is reset when the 'paste' option is set. + This option is reset when 'paste' is set and restored when 'paste' is + reset. If you don't want to see the ruler all the time but want to know where you are, use "g CTRL-G" |g_CTRL-G|. @@ -5609,7 +5619,9 @@ A jump table for the options with a short description can be found at |Q_op|. jump is only done if the match can be seen on the screen. The time to show the match can be set with 'matchtime'. A Beep is given if there is no match (no matter if the match can be - seen or not). This option is reset when the 'paste' option is set. + seen or not). + This option is reset when 'paste' is set and restored when 'paste' is + reset. When the 'm' flag is not included in 'cpoptions', typing a character will immediately move the cursor back to where it belongs. See the "sm" field in 'guicursor' for setting the cursor shape and @@ -5708,7 +5720,8 @@ A jump table for the options with a short description can be found at |Q_op|. mapping: ":inoremap # X^H#", where ^H is entered with CTRL-V CTRL-H. When using the ">>" command, lines starting with '#' are not shifted right. - NOTE: When 'paste' is set smart indenting is disabled. + This option is reset when 'paste' is set and restored when 'paste' is + reset. *'smarttab'* *'sta'* *'nosmarttab'* *'nosta'* 'smarttab' 'sta' boolean (default on) @@ -5723,6 +5736,8 @@ A jump table for the options with a short description can be found at |Q_op|. What gets inserted (a <Tab> or spaces) depends on the 'expandtab' option. Also see |ins-expandtab|. When 'expandtab' is not set, the number of spaces is minimized by using <Tab>s. + This option is reset when 'paste' is set and restored when 'paste' is + reset. *'softtabstop'* *'sts'* 'softtabstop' 'sts' number (default 0) @@ -5735,7 +5750,8 @@ A jump table for the options with a short description can be found at |Q_op|. commands like "x" still work on the actual characters. When 'sts' is zero, this feature is off. When 'sts' is negative, the value of 'shiftwidth' is used. - 'softtabstop' is set to 0 when the 'paste' option is set. + 'softtabstop' is set to 0 when the 'paste' option is set and restored + when 'paste' is reset. See also |ins-expandtab|. When 'expandtab' is not set, the number of spaces is minimized by using <Tab>s. The 'L' flag in 'cpoptions' changes how tabs are used when 'list' is @@ -6305,19 +6321,22 @@ A jump table for the options with a short description can be found at |Q_op|. < [The whitespace before and after the '0' must be a single <Tab>] When a binary search was done and no match was found in any of the - files listed in 'tags', and 'ignorecase' is set or a pattern is used + files listed in 'tags', and case is ignored or a pattern is used instead of a normal tag name, a retry is done with a linear search. Tags in unsorted tags files, and matches with different case will only be found in the retry. If a tag file indicates that it is case-fold sorted, the second, - linear search can be avoided for the 'ignorecase' case. Use a value - of '2' in the "!_TAG_FILE_SORTED" line for this. A tag file can be - case-fold sorted with the -f switch to "sort" in most unices, as in - the command: "sort -f -o tags tags". For "Exuberant ctags" version - 5.x or higher (at least 5.5) the --sort=foldcase switch can be used - for this as well. Note that case must be folded to uppercase for this - to work. + linear search can be avoided when case is ignored. Use a value of '2' + in the "!_TAG_FILE_SORTED" line for this. A tag file can be case-fold + sorted with the -f switch to "sort" in most unices, as in the command: + "sort -f -o tags tags". For "Exuberant ctags" version 5.x or higher + (at least 5.5) the --sort=foldcase switch can be used for this as + well. Note that case must be folded to uppercase for this to work. + + By default, tag searches are case-sensitive. Case is ignored when + 'ignorecase' is set and 'tagcase' is "followic", or when 'tagcase' is + "ignore". When 'tagbsearch' is off, tags searching is slower when a full match exists, but faster when no full match exists. Tags in unsorted tags @@ -6328,6 +6347,16 @@ A jump table for the options with a short description can be found at |Q_op|. This option doesn't affect commands that find all matching tags (e.g., command-line completion and ":help"). + *'tagcase'* *'tc'* +'tagcase' 'tc' string (default "followic") + global or local to buffer |global-local| + {not in Vi} + This option specifies how case is handled when searching the tags + file: + followic Follow the 'ignorecase' option + ignore Ignore case + match Match case + *'taglength'* *'tl'* 'taglength' 'tl' number (default 0) global @@ -6404,8 +6433,10 @@ A jump table for the options with a short description can be found at |Q_op|. local to buffer Maximum width of text that is being inserted. A longer line will be broken after white space to get this width. A zero value disables - this. 'textwidth' is set to 0 when the 'paste' option is set. When - 'textwidth' is zero, 'wrapmargin' may be used. See also + this. + 'textwidth' is set to 0 when the 'paste' option is set and restored + when 'paste' is reset. + When 'textwidth' is zero, 'wrapmargin' may be used. See also 'formatoptions' and |ins-textwidth|. When 'formatexpr' is set it will be used to break the line. |