diff options
Diffstat (limited to 'runtime/doc/options.txt')
| -rw-r--r-- | runtime/doc/options.txt | 230 |
1 files changed, 0 insertions, 230 deletions
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt index 44c5934233..2b81c408ed 100644 --- a/runtime/doc/options.txt +++ b/runtime/doc/options.txt @@ -1141,16 +1141,6 @@ A jump table for the options with a short description can be found at |Q_op|. added for the 'showbreak' setting. (default: off) - *'browsedir'* *'bsdir'* -'browsedir' 'bsdir' string (default "last") - global - Which directory to use for the file browser: - last Use same directory as with last file browser, where a - file was opened or saved. - buffer Use the directory of the related buffer. - current Use the current directory. - {path} Use the specified directory - *'bufhidden'* *'bh'* 'bufhidden' 'bh' string (default "") local to buffer |local-noglobal| @@ -3100,136 +3090,6 @@ A jump table for the options with a short description can be found at |Q_op|. When 'guifont' has a valid font and 'guifontwide' is empty Vim will attempt to set 'guifontwide' to a matching double-width font. - *'guioptions'* *'go'* -'guioptions' 'go' string (default "egmrLT" (MS-Windows)) - global - This option only has an effect in the GUI version of Vim. It is a - sequence of letters which describes what components and options of the - GUI should be used. - To avoid problems with flags that are added in the future, use the - "+=" and "-=" feature of ":set" |add-option-flags|. - - Valid letters are as follows: - *guioptions_a* *'go-a'* - 'a' Autoselect: If present, then whenever VISUAL mode is started, - or the Visual area extended, Vim tries to become the owner of - the windowing system's global selection. This means that the - Visually highlighted text is available for pasting into other - applications as well as into Vim itself. When the Visual mode - ends, possibly due to an operation on the text, or when an - application wants to paste the selection, the highlighted text - is automatically yanked into the "* selection register. - Thus the selection is still available for pasting into other - applications after the VISUAL mode has ended. - If not present, then Vim won't become the owner of the - windowing system's global selection unless explicitly told to - by a yank or delete operation for the "* register. - The same applies to the modeless selection. - *'go-P'* - 'P' Like autoselect but using the "+ register instead of the "* - register. - *'go-A'* - 'A' Autoselect for the modeless selection. Like 'a', but only - applies to the modeless selection. - - 'guioptions' autoselect Visual autoselect modeless ~ - "" - - - "a" yes yes - "A" - yes - "aA" yes yes - - *'go-c'* - 'c' Use console dialogs instead of popup dialogs for simple - choices. - *'go-d'* - 'd' Use dark theme variant if available. - *'go-e'* - 'e' Add tab pages when indicated with 'showtabline'. - 'guitablabel' can be used to change the text in the labels. - When 'e' is missing a non-GUI tab pages line may be used. - The GUI tabs are only supported on some systems, currently - Mac OS/X and MS-Windows. - *'go-i'* - 'i' Use a Vim icon. - *'go-m'* - 'm' Menu bar is present. - *'go-M'* - 'M' The system menu "$VIMRUNTIME/menu.vim" is not sourced. Note - that this flag must be added in the vimrc file, before - switching on syntax or filetype recognition (when the |gvimrc| - file is sourced the system menu has already been loaded; the - `:syntax on` and `:filetype on` commands load the menu too). - *'go-g'* - 'g' Grey menu items: Make menu items that are not active grey. If - 'g' is not included inactive menu items are not shown at all. - *'go-T'* - 'T' Include Toolbar. Currently only in Win32 GUI. - *'go-r'* - 'r' Right-hand scrollbar is always present. - *'go-R'* - 'R' Right-hand scrollbar is present when there is a vertically - split window. - *'go-l'* - 'l' Left-hand scrollbar is always present. - *'go-L'* - 'L' Left-hand scrollbar is present when there is a vertically - split window. - *'go-b'* - 'b' Bottom (horizontal) scrollbar is present. Its size depends on - the longest visible line, or on the cursor line if the 'h' - flag is included. |gui-horiz-scroll| - *'go-h'* - 'h' Limit horizontal scrollbar size to the length of the cursor - line. Reduces computations. |gui-horiz-scroll| - - And yes, you may even have scrollbars on the left AND the right if - you really want to :-). See |gui-scrollbars| for more information. - - *'go-v'* - 'v' Use a vertical button layout for dialogs. When not included, - a horizontal layout is preferred, but when it doesn't fit a - vertical layout is used anyway. Not supported in GTK 3. - *'go-p'* - 'p' Use Pointer callbacks for X11 GUI. This is required for some - window managers. If the cursor is not blinking or hollow at - the right moment, try adding this flag. This must be done - before starting the GUI. Set it in your |gvimrc|. Adding or - removing it after the GUI has started has no effect. - *'go-k'* - 'k' Keep the GUI window size when adding/removing a scrollbar, or - toolbar, tabline, etc. Instead, the behavior is similar to - when the window is maximized and will adjust 'lines' and - 'columns' to fit to the window. Without the 'k' flag Vim will - try to keep 'lines' and 'columns' the same when adding and - removing GUI components. - - *'guitablabel'* *'gtl'* -'guitablabel' 'gtl' string (default "") - global - When non-empty describes the text to use in a label of the GUI tab - pages line. When empty and when the result is empty Vim will use a - default label. See |setting-guitablabel| for more info. - - The format of this option is like that of 'statusline'. - 'guitabtooltip' is used for the tooltip, see below. - The expression will be evaluated in the |sandbox| when set from a - modeline, see |sandbox-option|. - This option cannot be set in a modeline when 'modelineexpr' is off. - - Only used when the GUI tab pages line is displayed. 'e' must be - present in 'guioptions'. For the non-GUI tab pages line 'tabline' is - used. - - *'guitabtooltip'* *'gtt'* -'guitabtooltip' 'gtt' string (default "") - global - When non-empty describes the text to use in a tooltip for the GUI tab - pages line. When empty Vim will use a default tooltip. - This option is otherwise just like 'guitablabel' above. - You can include a line break. Simplest method is to use |:let|: >vim - let &guitabtooltip = "line one\nline two" -< - *'helpfile'* *'hf'* 'helpfile' 'hf' string (default (MS-Windows) "$VIMRUNTIME\doc\help.txt" (others) "$VIMRUNTIME/doc/help.txt") @@ -3347,23 +3207,6 @@ A jump table for the options with a short description can be found at |Q_op|. Can be overruled by using "\c" or "\C" in the pattern, see |/ignorecase|. - *'imcmdline'* *'imc'* *'noimcmdline'* *'noimc'* -'imcmdline' 'imc' boolean (default off) - global - When set the Input Method is always on when starting to edit a command - line, unless entering a search pattern (see 'imsearch' for that). - Setting this option is useful when your input method allows entering - English characters directly, e.g., when it's used to type accented - characters with dead keys. - - *'imdisable'* *'imd'* *'noimdisable'* *'noimd'* -'imdisable' 'imd' boolean (default off, on for some systems (SGI)) - global - When set the Input Method is never used. This is useful to disable - the IM when it doesn't work properly. - Currently this option is on by default for SGI/IRIX machines. This - may change in later releases. - *'iminsert'* *'imi'* 'iminsert' 'imi' number (default 0) local to buffer @@ -4395,69 +4238,6 @@ A jump table for the options with a short description can be found at |Q_op|. < Will make Nvim scroll 5 lines at a time when scrolling vertically, and scroll 2 columns at a time when scrolling horizontally. - *'mouseshape'* *'mouses'* *E547* -'mouseshape' 'mouses' string (default "i:beam,r:beam,s:updown,sd:cross, - m:no,ml:up-arrow,v:rightup-arrow") - global - This option tells Vim what the mouse pointer should look like in - different modes. The option is a comma-separated list of parts, much - like used for 'guicursor'. Each part consist of a mode/location-list - and an argument-list: - mode-list:shape,mode-list:shape,.. - The mode-list is a dash separated list of these modes/locations: - In a normal window: ~ - n Normal mode - v Visual mode - ve Visual mode with 'selection' "exclusive" (same as 'v', - if not specified) - o Operator-pending mode - i Insert mode - r Replace mode - - Others: ~ - c appending to the command-line - ci inserting in the command-line - cr replacing in the command-line - m at the 'Hit ENTER' or 'More' prompts - ml idem, but cursor in the last line - e any mode, pointer below last window - s any mode, pointer on a status line - sd any mode, while dragging a status line - vs any mode, pointer on a vertical separator line - vd any mode, while dragging a vertical separator line - a everywhere - - The shape is one of the following: - avail name looks like ~ - w x arrow Normal mouse pointer - w x blank no pointer at all (use with care!) - w x beam I-beam - w x updown up-down sizing arrows - w x leftright left-right sizing arrows - w x busy The system's usual busy pointer - w x no The system's usual "no input" pointer - x udsizing indicates up-down resizing - x lrsizing indicates left-right resizing - x crosshair like a big thin + - x hand1 black hand - x hand2 white hand - x pencil what you write with - x question big ? - x rightup-arrow arrow pointing right-up - w x up-arrow arrow pointing up - x <number> any X11 pointer number (see X11/cursorfont.h) - - The "avail" column contains a 'w' if the shape is available for Win32, - x for X11. - Any modes not specified or shapes not available use the normal mouse - pointer. - - Example: >vim - set mouseshape=s:udsizing,m:no -< will make the mouse turn to a sizing arrow over the status lines and - indicate no input when the hit-enter prompt is displayed (since - clicking the mouse has no effect in this state.) - *'mousetime'* *'mouset'* 'mousetime' 'mouset' number (default 500) global @@ -4561,16 +4341,6 @@ A jump table for the options with a short description can be found at |Q_op|. This option cannot be set from a |modeline| or in the |sandbox|, for security reasons. - *'opendevice'* *'odev'* *'noopendevice'* *'noodev'* -'opendevice' 'odev' boolean (default off) - global - only for Windows - Enable reading and writing from devices. This may get Vim stuck on a - device that can be opened but doesn't actually do the I/O. Therefore - it is off by default. - Note that on Windows editing "aux.h", "lpt1.txt" and the like also - result in editing a device. - *'operatorfunc'* *'opfunc'* 'operatorfunc' 'opfunc' string (default "") global |