diff options
Diffstat (limited to 'runtime/doc')
| -rw-r--r-- | runtime/doc/change.txt | 13 | ||||
| -rw-r--r-- | runtime/doc/eval.txt | 7 | ||||
| -rw-r--r-- | runtime/doc/nvim_provider.txt | 2 | ||||
| -rw-r--r-- | runtime/doc/options.txt | 43 | ||||
| -rw-r--r-- | runtime/doc/tabpage.txt | 23 | ||||
| -rw-r--r-- | runtime/doc/various.txt | 1 |
6 files changed, 67 insertions, 22 deletions
diff --git a/runtime/doc/change.txt b/runtime/doc/change.txt index 42dc84e0de..30b7dcaa4a 100644 --- a/runtime/doc/change.txt +++ b/runtime/doc/change.txt @@ -370,11 +370,14 @@ CTRL-A Add [count] to the number or alphabetic character at CTRL-X Subtract [count] from the number or alphabetic character at or after the cursor. -The CTRL-A and CTRL-X commands work for (signed) decimal numbers, unsigned -binary/octal/hexadecimal numbers and alphabetic characters. This -depends on the 'nrformats' option. -- When 'nrformats' includes "bin", Vim considers numbers starting with '0b' or - '0B' as binary. +The CTRL-A and CTRL-X commands can work for: +- signed and unsigned decimal numbers +- unsigned binary, octal and hexadecimal numbers +- alphabetic characters + +This depends on the 'nrformats' option: +- When 'nrformats' includes "bin", Vim assumes numbers starting with '0b' or + '0B' are binary. - When 'nrformats' includes "octal", Vim considers numbers starting with a '0' to be octal, unless the number includes a '8' or '9'. Other numbers are decimal and may have a preceding minus sign. diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt index 6bdfa8dc8a..bb7ca77de7 100644 --- a/runtime/doc/eval.txt +++ b/runtime/doc/eval.txt @@ -1019,7 +1019,7 @@ A string constant accepts these special characters: \X. same as \x. \u.... character specified with up to 4 hex numbers, stored according to the current value of 'encoding' (e.g., "\u02a4") -\U.... same as \u.... +\U.... same as \u but allows up to 8 hex numbers. \b backspace <BS> \e escape <Esc> \f formfeed <FF> @@ -3794,7 +3794,9 @@ glob2regpat({expr}) *glob2regpat()* if filename =~ glob2regpat('Make*.mak') < This is equivalent to: > if filename =~ '^Make.*\.mak$' -< +< When {expr} is an empty string the result is "^$", match an + empty string. + *globpath()* globpath({path}, {expr} [, {nosuf} [, {list} [, {allinks}]]]) Perform glob() on all directories in {path} and concatenate @@ -7061,6 +7063,7 @@ statusline Compiled with support for 'statusline', 'rulerformat' syntax Compiled with syntax highlighting support |syntax|. syntax_items There are active syntax highlighting items for the current buffer. +tablineat 'tabline' option accepts %@Func@ items. tag_binary Compiled with binary searching in tags files |tag-binary-search|. tag_old_static Compiled with support for old static tags diff --git a/runtime/doc/nvim_provider.txt b/runtime/doc/nvim_provider.txt index a737d51ac4..91cd5fbfc7 100644 --- a/runtime/doc/nvim_provider.txt +++ b/runtime/doc/nvim_provider.txt @@ -26,7 +26,7 @@ are now decoupled from Nvim core as providers: The first example is clipboard integration: in the original Vim source code, clipboard functions account for more than 1k lines of C source code (and that -is just on ui.c), all to peform two tasks that are now accomplished with +is just on ui.c), all to perform two tasks that are now accomplished with simple shell commands such as xclip or pbcopy/pbpaste. The other example is Python scripting support: Vim has three files dedicated to diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt index bbd9cc1e2b..51bfc12f9d 100644 --- a/runtime/doc/options.txt +++ b/runtime/doc/options.txt @@ -4396,7 +4396,7 @@ A jump table for the options with a short description can be found at |Q_op|. recognized as a multi click. *'nrformats'* *'nf'* -'nrformats' 'nf' string (default "hex") +'nrformats' 'nf' string (default "bin,hex") local to buffer This defines what bases Vim will consider for numbers when using the CTRL-A and CTRL-X commands for adding to and subtracting from a number @@ -4409,6 +4409,9 @@ A jump table for the options with a short description can be found at |Q_op|. hex If included, numbers starting with "0x" or "0X" will be considered to be hexadecimal. Example: Using CTRL-X on "0x100" results in "0x0ff". + bin If included, numbers starting with "0b" or "0B" will be + considered to be binary. Example: Using CTRL-X on + "0b1000" subtracts one, resulting in "0b0111". Numbers which simply begin with a digit in the range 1-9 are always considered decimal. This also happens for numbers that are not recognized as octal or hex. @@ -6008,11 +6011,39 @@ A jump table for the options with a short description can be found at |Q_op|. ( - Start of item group. Can be used for setting the width and alignment of a section. Must be followed by %) somewhere. ) - End of item group. No width fields allowed. - T N For 'tabline': start of tab page N label. Use %T after the last - label. This information is used for mouse clicks. - X N For 'tabline': start of close tab N label. Use %X after the - label, e.g.: %3Xclose%X. Use %999X for a "close current tab" - mark. This information is used for mouse clicks. + T N For 'tabline': start of tab page N label. Use %T or %X to end + the label. Clicking this label with left mouse button switches + to the specified tab page. + X N For 'tabline': start of close tab N label. Use %X or %T to end + the label, e.g.: %3Xclose%X. Use %999X for a "close current + tab" label. Clicking this label with left mouse button closes + specified tab page. + @ N For 'tabline': start of execute function label. Use %X or %T to + end the label, e.g.: %10@SwitchBuffer@foo.c%X. Clicking this + label runs specified function: in the example when clicking once + using left mouse button on "foo.c" "SwitchBuffer(10, 1, 'l', + ' ')" expression will be run. Function receives the + following arguments in order: + 1. minwid field value or zero if no N was specified + 2. number of mouse clicks to detect multiple clicks + 3. mouse button used: "l", "r" or "m" for left, right or middle + button respectively; one should not rely on third argument + being only "l", "r" or "m": any other non-empty string value + that contains only ASCII lower case letters may be expected + for other mouse buttons + 4. modifiers pressed: string which contains "s" if shift + modifier was pressed, "c" for control, "a" for alt and "m" + for meta; currently if modifier is not pressed string + contains space instead, but one should not rely on presence + of spaces or specific order of modifiers: use |stridx()| to + test whether some modifier is present; string is guaranteed + to contain only ASCII letters and spaces, one letter per + modifier; "?" modifier may also be present, but its presence + is a bug that denotes that new mouse button recognition was + added without modifying code that reacts on mouse clicks on + this label. + Note: to test whether your version of Neovim contains this + feature use `has('tablineat')`. < - Where to truncate line if too long. Default is at the start. No width fields allowed. = - Separation point between left and right aligned items. diff --git a/runtime/doc/tabpage.txt b/runtime/doc/tabpage.txt index 13944dc02a..59c4a28ff2 100644 --- a/runtime/doc/tabpage.txt +++ b/runtime/doc/tabpage.txt @@ -197,22 +197,29 @@ REORDERING TAB PAGES: Move the current tab page to after tab page N. Use zero to make the current tab page the first one. Without N the tab page is made the last one. > + :.tabmove " do nothing :-tabmove " move the tab page to the left - :tabmove " move the tab page to the right - :.tabmove " as above - :+tabmove " as above + :+tabmove " move the tab page to the right :0tabmove " move the tab page to the beginning of the tab " list - :$tabmove " move the tab page to the end of the tab list -< + :tabmove 0 " as above + :tabmove " move the tab page to the last + :$tabmove " as above + :tabmove $ " as above + :tabm[ove] +[N] :tabm[ove] -[N] Move the current tab page N places to the right (with +) or to - the left (with -). + the left (with -). > + :tabmove - " move the tab page to the left + :tabmove -1 " as above + :tabmove + " move the tab page to the right + :tabmove +1 " as above + Note that although it is possible to move a tab behind the N-th one by using -:Ntabmove, it is impossible to move it by N places by using :+Ntabmove. For -clarification what +N means in this context see |[range]|. +:Ntabmove. And move it by N places by using :+Ntabmove. For clarification what ++N means in this context see |[range]|. LOOPING OVER TAB PAGES: diff --git a/runtime/doc/various.txt b/runtime/doc/various.txt index 26ff8f0783..ff37466a14 100644 --- a/runtime/doc/various.txt +++ b/runtime/doc/various.txt @@ -363,6 +363,7 @@ N *+startuptime* |--startuptime| argument N *+statusline* Options 'statusline', 'rulerformat' and special formats of 'titlestring' and 'iconstring' N *+syntax* Syntax highlighting |syntax| +N *+tablineat* 'tabline' option recognizing %@Func@ items. N *+tag_binary* binary searching in tags file |tag-binary-search| N *+tag_old_static* old method for static tags |tag-old-static| m *+tag_any_white* any white space allowed in tags file |tag-any-white| |