diff options
Diffstat (limited to 'src/nvim/ex_cmds.c')
| -rw-r--r-- | src/nvim/ex_cmds.c | 430 |
1 files changed, 171 insertions, 259 deletions
diff --git a/src/nvim/ex_cmds.c b/src/nvim/ex_cmds.c index 126129b24d..8f256728e3 100644 --- a/src/nvim/ex_cmds.c +++ b/src/nvim/ex_cmds.c @@ -1,9 +1,7 @@ // This is an open source non-commercial project. Dear PVS-Studio, please check // it. PVS-Studio Static Code Analyzer for C, C++ and C#: http://www.viva64.com -/* - * ex_cmds.c: some functions for command line commands - */ +// ex_cmds.c: some functions for command line commands #include <assert.h> #include <float.h> @@ -249,11 +247,9 @@ void ex_align(exarg_T *eap) indent = width; } } else { - /* - * if 'textwidth' set, use it - * else if 'wrapmargin' set, use it - * if invalid value, use 80 - */ + // if 'textwidth' set, use it + // else if 'wrapmargin' set, use it + // if invalid value, use 80 if (width <= 0) { width = (int)curbuf->b_p_tw; } @@ -287,18 +283,14 @@ void ex_align(exarg_T *eap) } else { new_indent = width - len; // right align - /* - * Make sure that embedded TABs don't make the text go too far - * to the right. - */ + // Make sure that embedded TABs don't make the text go too far + // to the right. if (has_tab) { while (new_indent > 0) { (void)set_indent(new_indent, 0); if (linelen(NULL) <= width) { - /* - * Now try to move the line as much as possible to - * the right. Stop when it moves too far. - */ + // Now try to move the line as much as possible to + // the right. Stop when it moves too far. do { (void)set_indent(++new_indent, 0); } while (linelen(NULL) <= width); @@ -933,10 +925,8 @@ int do_move(linenr_T line1, linenr_T line2, linenr_T dest) num_lines = line2 - line1 + 1; - /* - * First we copy the old text to its new location -- webb - * Also copy the flag that ":global" command uses. - */ + // First we copy the old text to its new location -- webb + // Also copy the flag that ":global" command uses. if (u_save(dest, dest + 1) == FAIL) { return FAIL; } @@ -949,21 +939,19 @@ int do_move(linenr_T line1, linenr_T line2, linenr_T dest) } } - /* - * Now we must be careful adjusting our marks so that we don't overlap our - * mark_adjust() calls. - * - * We adjust the marks within the old text so that they refer to the - * last lines of the file (temporarily), because we know no other marks - * will be set there since these line numbers did not exist until we added - * our new lines. - * - * Then we adjust the marks on lines between the old and new text positions - * (either forwards or backwards). - * - * And Finally we adjust the marks we put at the end of the file back to - * their final destination at the new text position -- webb - */ + // Now we must be careful adjusting our marks so that we don't overlap our + // mark_adjust() calls. + // + // We adjust the marks within the old text so that they refer to the + // last lines of the file (temporarily), because we know no other marks + // will be set there since these line numbers did not exist until we added + // our new lines. + // + // Then we adjust the marks on lines between the old and new text positions + // (either forwards or backwards). + // + // And Finally we adjust the marks we put at the end of the file back to + // their final destination at the new text position -- webb last_line = curbuf->b_ml.ml_line_count; mark_adjust_nofold(line1, line2, last_line - line2, 0L, kExtmarkNOOP); @@ -1011,9 +999,7 @@ int do_move(linenr_T line1, linenr_T line2, linenr_T dest) // send update regarding the new lines that were added buf_updates_send_changes(curbuf, dest + 1, num_lines, 0); - /* - * Now we delete the original text -- webb - */ + // Now we delete the original text -- webb if (u_save(line1 + extra - 1, line2 + extra + 1) == FAIL) { return FAIL; } @@ -1030,9 +1016,7 @@ int do_move(linenr_T line1, linenr_T line2, linenr_T dest) dest + line_off, 0, dest_byte + byte_off, kExtmarkUndo); - /* - * Leave the cursor on the last of the moved lines. - */ + // Leave the cursor on the last of the moved lines. if (dest >= line1) { curwin->w_cursor.lnum = dest; } else { @@ -1069,17 +1053,15 @@ void ex_copy(linenr_T line1, linenr_T line2, linenr_T n) curbuf->b_op_start.col = curbuf->b_op_end.col = 0; } - /* - * there are three situations: - * 1. destination is above line1 - * 2. destination is between line1 and line2 - * 3. destination is below line2 - * - * n = destination (when starting) - * curwin->w_cursor.lnum = destination (while copying) - * line1 = start of source (while copying) - * line2 = end of source (while copying) - */ + // there are three situations: + // 1. destination is above line1 + // 2. destination is between line1 and line2 + // 3. destination is below line2 + // + // n = destination (when starting) + // curwin->w_cursor.lnum = destination (while copying) + // line1 = start of source (while copying) + // line2 = end of source (while copying) if (u_save(n, n + 1) == FAIL) { return; } @@ -1155,10 +1137,8 @@ void do_bang(int addr_count, exarg_T *eap, bool forceit, bool do_in, bool do_out msg_scroll = scroll_save; } - /* - * Try to find an embedded bang, like in :!<cmd> ! [args] - * (:!! is indicated by the 'forceit' variable) - */ + // Try to find an embedded bang, like in :!<cmd> ! [args] + // (:!! is indicated by the 'forceit' variable) bool ins_prevcmd = forceit; trailarg = arg; do { @@ -1187,10 +1167,8 @@ void do_bang(int addr_count, exarg_T *eap, bool forceit, bool do_in, bool do_out xfree(newcmd); newcmd = t; - /* - * Scan the rest of the argument for '!', which is replaced by the - * previous command. "\!" is replaced by "!" (this is vi compatible). - */ + // Scan the rest of the argument for '!', which is replaced by the + // previous command. "\!" is replaced by "!" (this is vi compatible). trailarg = NULL; while (*p) { if (*p == '!') { @@ -1221,9 +1199,7 @@ void do_bang(int addr_count, exarg_T *eap, bool forceit, bool do_in, bool do_out AppendToRedobuff("\n"); bangredo = false; } - /* - * Add quotes around the command, for shells that need them. - */ + // Add quotes around the command, for shells that need them. if (*p_shq != NUL) { newcmd = xmalloc(STRLEN(prevcmd) + 2 * STRLEN(p_shq) + 1); STRCPY(newcmd, p_shq); @@ -1298,18 +1274,16 @@ static void do_filter(linenr_T line1, linenr_T line2, exarg_T *eap, char *cmd, b changed_line_abv_curs(); invalidate_botline(); - /* - * When using temp files: - * 1. * Form temp file names - * 2. * Write the lines to a temp file - * 3. Run the filter command on the temp file - * 4. * Read the output of the command into the buffer - * 5. * Delete the original lines to be filtered - * 6. * Remove the temp files - * - * When writing the input with a pipe or when catching the output with a - * pipe only need to do 3. - */ + // When using temp files: + // 1. * Form temp file names + // 2. * Write the lines to a temp file + // 3. Run the filter command on the temp file + // 4. * Read the output of the command into the buffer + // 5. * Delete the original lines to be filtered + // 6. * Remove the temp files + // + // When writing the input with a pipe or when catching the output with a + // pipe only need to do 3. if (do_out) { shell_flags |= kShellOptDoOut; @@ -1337,10 +1311,8 @@ static void do_filter(linenr_T line1, linenr_T line2, exarg_T *eap, char *cmd, b goto filterend; } - /* - * The writing and reading of temp files will not be shown. - * Vi also doesn't do this and the messages are not very informative. - */ + // The writing and reading of temp files will not be shown. + // Vi also doesn't do this and the messages are not very informative. no_wait_return++; // don't call wait_return() while busy if (itmp != NULL && buf_write(curbuf, itmp, NULL, line1, line2, eap, false, false, false, true) == FAIL) { @@ -1428,10 +1400,8 @@ static void do_filter(linenr_T line1, linenr_T line2, exarg_T *eap, char *cmd, b } } - /* - * Put cursor on first filtered line for ":range!cmd". - * Adjust '[ and '] (set by buf_write()). - */ + // Put cursor on first filtered line for ":range!cmd". + // Adjust '[ and '] (set by buf_write()). curwin->w_cursor.lnum = line1; del_lines(linecount, true); curbuf->b_op_start.lnum -= linecount; // adjust '[ @@ -1440,9 +1410,7 @@ static void do_filter(linenr_T line1, linenr_T line2, exarg_T *eap, char *cmd, b // for next write foldUpdate(curwin, curbuf->b_op_start.lnum, curbuf->b_op_end.lnum); } else { - /* - * Put cursor on last new line for ":r !cmd". - */ + // Put cursor on last new line for ":r !cmd". linecount = curbuf->b_op_end.lnum - curbuf->b_op_start.lnum + 1; curwin->w_cursor.lnum = curbuf->b_op_end.lnum; } @@ -1504,10 +1472,8 @@ void do_shell(char *cmd, int flags) return; } - /* - * For autocommands we want to get the output on the current screen, to - * avoid having to type return below. - */ + // For autocommands we want to get the output on the current screen, to + // avoid having to type return below. msg_putchar('\r'); // put cursor at start of line msg_putchar('\n'); // may shift screen one line up @@ -1740,13 +1706,11 @@ int rename_buffer(char *new_fname) if (aborting()) { // autocmds may abort script processing return FAIL; } - /* - * The name of the current buffer will be changed. - * A new (unlisted) buffer entry needs to be made to hold the old file - * name, which will become the alternate file name. - * But don't set the alternate file name if the buffer didn't have a - * name. - */ + // The name of the current buffer will be changed. + // A new (unlisted) buffer entry needs to be made to hold the old file + // name, which will become the alternate file name. + // But don't set the alternate file name if the buffer didn't have a + // name. fname = curbuf->b_ffname; sfname = curbuf->b_sfname; xfname = curbuf->b_fname; @@ -1860,9 +1824,7 @@ int do_write(exarg_T *eap) other = otherfile(ffname); } - /* - * If we have a new file, put its name in the list of alternate file names. - */ + // If we have a new file, put its name in the list of alternate file names. if (other) { if (vim_strchr(p_cpo, CPO_ALTWRITE) != NULL || eap->cmdidx == CMD_saveas) { @@ -2113,13 +2075,11 @@ void do_wqall(exarg_T *eap) } else if (!bufIsChanged(buf) || bt_dontwrite(buf)) { continue; } - /* - * Check if there is a reason the buffer cannot be written: - * 1. if the 'write' option is set - * 2. if there is no file name (even after browsing) - * 3. if the 'readonly' is set (even after a dialog) - * 4. if overwriting is allowed (even after a dialog) - */ + // Check if there is a reason the buffer cannot be written: + // 1. if the 'write' option is set + // 2. if there is no file name (even after browsing) + // 3. if the 'readonly' is set (even after a dialog) + // 4. if overwriting is allowed (even after a dialog) if (not_writing()) { error++; break; @@ -2405,10 +2365,8 @@ int do_ecmd(int fnum, char *ffname, char *sfname, exarg_T *eap, linenr_T newlnum goto theend; } - /* - * End Visual mode before switching to another buffer, so the text can be - * copied into the GUI selection buffer. - */ + // End Visual mode before switching to another buffer, so the text can be + // copied into the GUI selection buffer. reset_VIsual(); if ((command != NULL || newlnum > (linenr_T)0) @@ -2426,10 +2384,8 @@ int do_ecmd(int fnum, char *ffname, char *sfname, exarg_T *eap, linenr_T newlnum xfree(p); } - /* - * If we are starting to edit another file, open a (new) buffer. - * Otherwise we re-use the current buffer. - */ + // If we are starting to edit another file, open a (new) buffer. + // Otherwise we re-use the current buffer. if (other_file) { const int prev_alt_fnum = curwin->w_alt_fnum; @@ -2507,12 +2463,10 @@ int do_ecmd(int fnum, char *ffname, char *sfname, exarg_T *eap, linenr_T newlnum solcol = pos->col; } - /* - * Make the (new) buffer the one used by the current window. - * If the old buffer becomes unused, free it if ECMD_HIDE is false. - * If the current buffer was empty and has no file name, curbuf - * is returned by buflist_new(), nothing to do here. - */ + // Make the (new) buffer the one used by the current window. + // If the old buffer becomes unused, free it if ECMD_HIDE is false. + // If the current buffer was empty and has no file name, curbuf + // is returned by buflist_new(), nothing to do here. if (buf != curbuf) { const int save_cmdwin_type = cmdwin_type; @@ -2663,13 +2617,11 @@ int do_ecmd(int fnum, char *ffname, char *sfname, exarg_T *eap, linenr_T newlnum // highlighting to work in the other file. did_filetype = false; - /* - * other_file oldbuf - * false false re-edit same file, buffer is re-used - * false true re-edit same file, nothing changes - * true false start editing new file, new buffer - * true true start editing in existing buffer (nothing to do) - */ + // other_file oldbuf + // false false re-edit same file, buffer is re-used + // false true re-edit same file, nothing changes + // true false start editing new file, new buffer + // true true start editing in existing buffer (nothing to do) if (!other_file && !oldbuf) { // re-use the buffer set_last_cursor(curwin); // may set b_last_cursor if (newlnum == ECMD_LAST || newlnum == ECMD_LASTL) { @@ -2728,9 +2680,7 @@ int do_ecmd(int fnum, char *ffname, char *sfname, exarg_T *eap, linenr_T newlnum curbuf->b_op_end.lnum = 0; } - /* - * If we get here we are sure to start editing - */ + // If we get here we are sure to start editing // Assume success now retval = OK; @@ -2741,17 +2691,13 @@ int do_ecmd(int fnum, char *ffname, char *sfname, exarg_T *eap, linenr_T newlnum curbuf->b_flags &= ~BF_NOTEDITED; } - /* - * Check if we are editing the w_arg_idx file in the argument list. - */ + // Check if we are editing the w_arg_idx file in the argument list. check_arg_idx(curwin); if (!auto_buf) { - /* - * Set cursor and init window before reading the file and executing - * autocommands. This allows for the autocommands to position the - * cursor. - */ + // Set cursor and init window before reading the file and executing + // autocommands. This allows for the autocommands to position the + // cursor. curwin_init(); // It's possible that all lines in the buffer changed. Need to update @@ -2765,19 +2711,15 @@ int do_ecmd(int fnum, char *ffname, char *sfname, exarg_T *eap, linenr_T newlnum // Change directories when the 'acd' option is set. do_autochdir(); - /* - * Careful: open_buffer() and apply_autocmds() may change the current - * buffer and window. - */ + // Careful: open_buffer() and apply_autocmds() may change the current + // buffer and window. orig_pos = curwin->w_cursor; topline = curwin->w_topline; if (!oldbuf) { // need to read the file swap_exists_action = SEA_DIALOG; curbuf->b_flags |= BF_CHECK_RO; // set/reset 'ro' flag - /* - * Open the buffer and read the file. - */ + // Open the buffer and read the file. if (flags & ECMD_NOWINENTER) { readfile_flags |= READ_NOWINENTER; } @@ -2868,10 +2810,8 @@ int do_ecmd(int fnum, char *ffname, char *sfname, exarg_T *eap, linenr_T newlnum // Check if cursors in other windows on the same buffer are still valid check_lnums(false); - /* - * Did not read the file, need to show some info about the file. - * Do this after setting the cursor. - */ + // Did not read the file, need to show some info about the file. + // Do this after setting the cursor. if (oldbuf && !auto_buf) { int msg_scroll_save = msg_scroll; @@ -3559,10 +3499,8 @@ static int do_sub(exarg_T *eap, proftime_T timeout, long cmdpreview_ns, handle_T } } - /* - * Small incompatibility: vi sees '\n' as end of the command, but in - * Vim we want to use '\n' to find/substitute a NUL. - */ + // Small incompatibility: vi sees '\n' as end of the command, but in + // Vim we want to use '\n' to find/substitute a NUL. sub = cmd; // remember the start of the substitution while (cmd[0]) { @@ -3620,9 +3558,7 @@ static int do_sub(exarg_T *eap, proftime_T timeout, long cmdpreview_ns, handle_T } } - /* - * check for trailing command or garbage - */ + // check for trailing command or garbage cmd = skipwhite(cmd); if (*cmd && *cmd != '"') { // if not end-of-line or comment eap->nextcmd = check_nextcmd(cmd); @@ -3711,50 +3647,48 @@ static int do_sub(exarg_T *eap, proftime_T timeout, long cmdpreview_ns, handle_T bool skip_match = false; linenr_T sub_firstlnum; // nr of first sub line - /* - * The new text is build up step by step, to avoid too much - * copying. There are these pieces: - * sub_firstline The old text, unmodified. - * copycol Column in the old text where we started - * looking for a match; from here old text still - * needs to be copied to the new text. - * matchcol Column number of the old text where to look - * for the next match. It's just after the - * previous match or one further. - * prev_matchcol Column just after the previous match (if any). - * Mostly equal to matchcol, except for the first - * match and after skipping an empty match. - * regmatch.*pos Where the pattern matched in the old text. - * new_start The new text, all that has been produced so - * far. - * new_end The new text, where to append new text. - * - * lnum The line number where we found the start of - * the match. Can be below the line we searched - * when there is a \n before a \zs in the - * pattern. - * sub_firstlnum The line number in the buffer where to look - * for a match. Can be different from "lnum" - * when the pattern or substitute string contains - * line breaks. - * - * Special situations: - * - When the substitute string contains a line break, the part up - * to the line break is inserted in the text, but the copy of - * the original line is kept. "sub_firstlnum" is adjusted for - * the inserted lines. - * - When the matched pattern contains a line break, the old line - * is taken from the line at the end of the pattern. The lines - * in the match are deleted later, "sub_firstlnum" is adjusted - * accordingly. - * - * The new text is built up in new_start[]. It has some extra - * room to avoid using xmalloc()/free() too often. - * - * Make a copy of the old line, so it won't be taken away when - * updating the screen or handling a multi-line match. The "old_" - * pointers point into this copy. - */ + // The new text is build up step by step, to avoid too much + // copying. There are these pieces: + // sub_firstline The old text, unmodified. + // copycol Column in the old text where we started + // looking for a match; from here old text still + // needs to be copied to the new text. + // matchcol Column number of the old text where to look + // for the next match. It's just after the + // previous match or one further. + // prev_matchcol Column just after the previous match (if any). + // Mostly equal to matchcol, except for the first + // match and after skipping an empty match. + // regmatch.*pos Where the pattern matched in the old text. + // new_start The new text, all that has been produced so + // far. + // new_end The new text, where to append new text. + // + // lnum The line number where we found the start of + // the match. Can be below the line we searched + // when there is a \n before a \zs in the + // pattern. + // sub_firstlnum The line number in the buffer where to look + // for a match. Can be different from "lnum" + // when the pattern or substitute string contains + // line breaks. + // + // Special situations: + // - When the substitute string contains a line break, the part up + // to the line break is inserted in the text, but the copy of + // the original line is kept. "sub_firstlnum" is adjusted for + // the inserted lines. + // - When the matched pattern contains a line break, the old line + // is taken from the line at the end of the pattern. The lines + // in the match are deleted later, "sub_firstlnum" is adjusted + // accordingly. + // + // The new text is built up in new_start[]. It has some extra + // room to avoid using xmalloc()/free() too often. + // + // Make a copy of the old line, so it won't be taken away when + // updating the screen or handling a multi-line match. The "old_" + // pointers point into this copy. sub_firstlnum = lnum; copycol = 0; matchcol = 0; @@ -3765,14 +3699,12 @@ static int do_sub(exarg_T *eap, proftime_T timeout, long cmdpreview_ns, handle_T got_match = true; } - /* - * Loop until nothing more to replace in this line. - * 1. Handle match with empty string. - * 2. If subflags.do_ask is set, ask for confirmation. - * 3. substitute the string. - * 4. if subflags.do_all is set, find next match - * 5. break if there isn't another match in this line - */ + // Loop until nothing more to replace in this line. + // 1. Handle match with empty string. + // 2. If subflags.do_ask is set, ask for confirmation. + // 3. substitute the string. + // 4. if subflags.do_all is set, find next match + // 5. break if there isn't another match in this line for (;;) { SubResult current_match = { .start = { 0, 0 }, @@ -3811,11 +3743,9 @@ static int do_sub(exarg_T *eap, proftime_T timeout, long cmdpreview_ns, handle_T curwin->w_cursor.lnum = lnum; do_again = false; - /* - * 1. Match empty string does not count, except for first - * match. This reproduces the strange vi behaviour. - * This also catches endless loops. - */ + // 1. Match empty string does not count, except for first + // match. This reproduces the strange vi behaviour. + // This also catches endless loops. if (matchcol == prev_matchcol && regmatch.endpos[0].lnum == 0 && matchcol == regmatch.endpos[0].col) { @@ -3880,9 +3810,7 @@ static int do_sub(exarg_T *eap, proftime_T timeout, long cmdpreview_ns, handle_T no_u_sync++; } - /* - * Loop until 'y', 'n', 'q', CTRL-E or CTRL-Y typed. - */ + // Loop until 'y', 'n', 'q', CTRL-E or CTRL-Y typed. while (subflags.do_ask) { if (exmode_active) { char *prompt; @@ -4266,15 +4194,13 @@ skip: && !re_multiline(regmatch.regprog))); nmatch = -1; - /* - * Replace the line in the buffer when needed. This is - * skipped when there are more matches. - * The check for nmatch_tl is needed for when multi-line - * matching must replace the lines before trying to do another - * match, otherwise "\@<=" won't work. - * When the match starts below where we start searching also - * need to replace the line first (using \zs after \n). - */ + // Replace the line in the buffer when needed. This is + // skipped when there are more matches. + // The check for nmatch_tl is needed for when multi-line + // matching must replace the lines before trying to do another + // match, otherwise "\@<=" won't work. + // When the match starts below where we start searching also + // need to replace the line first (using \zs after \n). if (lastone || nmatch_tl > 0 || (nmatch = vim_regexec_multi(®match, curwin, @@ -4282,13 +4208,11 @@ skip: matchcol, NULL, NULL)) == 0 || regmatch.startpos[0].lnum > 0) { if (new_start != NULL) { - /* - * Copy the rest of the line, that didn't match. - * "matchcol" has to be adjusted, we use the end of - * the line as reference, because the substitute may - * have changed the number of characters. Same for - * "prev_matchcol". - */ + // Copy the rest of the line, that didn't match. + // "matchcol" has to be adjusted, we use the end of + // the line as reference, because the substitute may + // have changed the number of characters. Same for + // "prev_matchcol". STRCAT(new_start, sub_firstline + copycol); matchcol = (colnr_T)STRLEN(sub_firstline) - matchcol; prev_matchcol = (colnr_T)STRLEN(sub_firstline) @@ -4300,12 +4224,10 @@ skip: ml_replace(lnum, new_start, true); if (nmatch_tl > 0) { - /* - * Matched lines have now been substituted and are - * useless, delete them. The part after the match - * has been appended to new_start, we don't need - * it in the buffer. - */ + // Matched lines have now been substituted and are + // useless, delete them. The part after the match + // has been appended to new_start, we don't need + // it in the buffer. lnum++; if (u_savedel(lnum, nmatch_tl) != OK) { break; @@ -4348,9 +4270,7 @@ skip: sub_firstlnum, matchcol, NULL, NULL); } - /* - * 5. break if there isn't another match in this line - */ + // 5. break if there isn't another match in this line if (nmatch <= 0) { // If the match found didn't start where we were // searching, do the next search in the line where we @@ -4513,12 +4433,10 @@ skip: /// @return true if a message was given. bool do_sub_msg(bool count_only) { - /* - * Only report substitutions when: - * - more than 'report' substitutions - * - command was typed by user, or number of changed lines > 'report' - * - giving messages is not disabled by 'lazyredraw' - */ + // Only report substitutions when: + // - more than 'report' substitutions + // - command was typed by user, or number of changed lines > 'report' + // - giving messages is not disabled by 'lazyredraw' if (((sub_nsubs > p_report && (KeyTyped || sub_nlines > 1 || p_report < 1)) || count_only) && messaging()) { @@ -4609,11 +4527,9 @@ void ex_global(exarg_T *eap) cmd = eap->arg; which_pat = RE_LAST; // default: use last used regexp - /* - * undocumented vi feature: - * "\/" and "\?": use previous search pattern. - * "\&": use previous substitute pattern. - */ + // undocumented vi feature: + // "\/" and "\?": use previous search pattern. + // "\&": use previous substitute pattern. if (*cmd == '\\') { cmd++; if (vim_strchr("/?&", *cmd) == NULL) { @@ -4752,9 +4668,7 @@ void free_old_sub(void) /// @return true when it was created. bool prepare_tagpreview(bool undo_sync) { - /* - * If there is already a preview window open, use that one. - */ + // If there is already a preview window open, use that one. if (!curwin->w_p_pvw) { bool found_win = false; FOR_ALL_WINDOWS_IN_TAB(wp, curtab) { @@ -4765,9 +4679,7 @@ bool prepare_tagpreview(bool undo_sync) } } if (!found_win) { - /* - * There is no preview window open yet. Create one. - */ + // There is no preview window open yet. Create one. if (win_split(g_do_tagpreview > 0 ? g_do_tagpreview : 0, 0) == FAIL) { return false; |