| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: assertion failure in nvim_create_buf if buflist_new autocommands open
a swapfile when "scratch" is set.
Solution: block autocommands when setting up the buffer; fire them later
instead.
Note that, unlike buflist_new, I don't check if autocommands aborted script
processing; the buffer is already created and configured at that point, so might
as well return the handle anyway.
Rather than repeat try_{start,end} and {un}block_autocmds for each relevant
operation, just do it at the start and near the end. This means that, if
TermResponse fires from unblock_autocmds for whatever reason, it can see the
buffer in an already configured state if we didn't bail due to an error (plus
it's probably a bit cleaner this way).
|
| |
|
|
|
|
|
| |
Problem: memory leak in nvim_create_buf if buflist_new autocommands load the
new buffer early.
Solution: do not open a memfile in that case.
|
| |
|
|
|
|
| |
Problem: Cursor position set by nvim_win_set_cursor() is not reflected
on the screen when followed by a blocking call like getchar().
Solution: Immediately update the cursor position on the grid.
|
| |
|
|
| |
fixes #27720
|
| |
|
|
|
|
|
|
|
|
|
| |
A lot of functions in move.c only worked for curwin, alternatively
took a `wp` arg but still only work if that happens to be curwin.
Refactor those that are needed for update_topline(wp) to work
for any window.
fixes #27723
fixes #27720
|
| | |
|
| |
|
|
|
|
|
| |
Problem: nvim_win_set_config does not update the tp_curwin of win's original
tabpage when moving it to another.
Solution: update it if win was the tp_curwin. Add a test.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: nvim_win_set_config does not update statuslines after removing a split.
Solution: call last_status.
Didn't realize this was missing in the original nvim_win_set_config for splits
PR.
As it can only be done for the current tabpage, do it if win_tp == curtab;
enter_tabpage will eventually call last_status anyway when the user enters
another tabpage.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: there are new ways to escape textlock or break the cmdwin in
nvim_win_set_config and nvim_tabpage_set_win.
Solution: fix them. Use win_goto to check it in nvim_tabpage_set_win and use the
try_start/end pattern like with similar functions such as nvim_set_current_win
(which uses the existing msg_list, if set).
Careful not to use `wp->handle` when printing the window ID in the error message
for nvim_tabpage_set_win, as win_goto autocommands may have freed the window.
On a related note, I have a feeling some API functions ought to be checking
curbuf_locked...
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: nvim_win_set_config does not handle failure in win_split_ins properly
yet, which can cause all sorts of issues. Also nvim_open_win and
nvim_win_set_config do not set the error message to the one from win_split_ins.
Solution: handle failure by undoing winframe_remove, like in win_splitmove.
Make sure autocommands from switching to the altwin fire within a valid window,
and ensure they don't screw things up. Set the error message to that of
win_split_ins, if any.
Also change a few other small things, including:
- adjust win_append to take a tabpage_T * argument, which is more consistent
with win_remove (and also allows us to undo a call to win_remove).
- allow winframe_restore to restore window positions. Useful if `wp` was in a
different tabpage, as a call to win_comp_pos (which only works for the current
tabpage) after winframe_restore should no longer be needed.
Though enter_tabpage calls win_comp_pos anyway, this has the advantage of
ensuring w_winrow/col remains accurate even before entering the tabpage
(useful for stuff like win_screenpos, if used on a window in another tabpage).
(This change should probably also be PR'd to Vim later, even though it doesn't
use winframe_restore for a `wp` in a different tabpage yet).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: nvim_open_win blocking all win_set_buf autocommands when !enter &&
!noautocmd is too aggressive.
Solution: temporarily block WinEnter/Leave and BufEnter/Leave events when
setting the buffer. Delegate the firing of BufWinEnter back to win_set_buf,
which also has the advantage of keeping the timing consistent (e.g: before the
epilogue in enter_buffer, which also handles restoring the cursor position if
autocommands didn't change it, among other things). Reword the documentation for
noautocmd a bit.
I pondered modifying do_buffer and callees to allow for BufEnter/Leave being
conditionally disabled, but it seems too invasive (and potentially error-prone,
especially if new code paths to BufEnter/Leave are added in the future).
Unfortunately, doing this has the drawback of blocking ALL such events for the
duration, which also means blocking unrelated such events; like if window
switching occurs in a ++nested autocmd fired by win_set_buf. If this turns out
to be a problem in practice, a different solution specialized for nvim_open_win
could be considered. :-)
|
| |
|
|
|
|
|
|
|
|
| |
Problem: currently, for splits, nvim_win_set_config accepts win without any of
split or vertical set, which has little effect and seems error-prone.
Solution: require at least one of split or vertical to also be set for splits.
Also, update nvim_win_set_config docs, as it's no longer limited to just
floating and external windows.
|
| |
|
|
|
|
|
|
|
|
| |
Problem: splitting is disallowed in some cases to prevent the window layout
changes while a window is closing, but it's not checked for.
Solution: check for this, and set the API error message directly.
(Also sneak in a change to tui.c that got lost from #27352; it's a char* buf,
and the memset is assuming one byte each anyway)
|
| |
|
|
|
|
|
| |
Problem: WinNew and win_enter autocommands can delete the target buffer to
switch to, causing a heap-use-after-free.
Solution: store a bufref to the buffer, check it before attempting to switch.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: if switch_win{_noblock} fails to restore the old curwin after WinNew
(e.g: it was closed), wp will become the new curwin, but win_set_buf enter
events would still be blocked if !enter && !noautocmd.
Solution: fire them, as we've actually entered the new window.
Note: there's a problem of switch_win{_noblock} failing to restore the old
curwin, leaving us in wp without triggering WinEnter/WinLeave, but this affects
all callers of switch_win{_noblock} anyways. (It's also not clear how WinLeave
can be called if the old curwin was closed already).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: BufWinEnter is not fired when not entering a new window, even when a
different buffer is specified and buffer-related autocommands are unblocked
(!noautocmd).
Solution: fire it in the context of the new window and buffer. Do not do it if
the buffer is unchanged, like :{s}buffer.
Be wary of autocommands! For example, it's possible for nvim_win_set_config to
be used in an autocommand to move a window to a different tabpage (in contrast,
things like wincmd T actually create a *new* window, so it may not have been
possible before, meaning other parts of Nvim could assume windows can't do
this... I'd be especially cautious of logic that restores curwin and curtab
without checking if curwin is still valid in curtab, if any such logic exists).
Also, bail early from win_set_buf if setting the temp curwin fails; this
shouldn't be possible, as the callers check that wp is valid, but in case that's
not true, win_set_buf will no longer continue setting a buffer for the wrong
window.
Note that pum_create_float_preview also uses win_set_buf, but from a glance,
doesn't look like it properly checks for autocmds screwing things up (win_enter,
nvim_create_buf...). I haven't addressed that here.
Also adds some test coverage for nvim_open_win autocommands.
Closes #27121.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: win_set_config should have the observable effect of moving an existing
window to another place, but instead fires autocommands as if a new window was
created and entered (and does not fire autocommands reflecting a "return" to the
original window).
Solution: do not fire win_enter-related autocommands when splitting the window,
but continue to fire them when entering the window that fills the new space when
moving a window to a different tabpage, as the new curwin changes.
Also, remove "++once" from the WinEnter autocmd in the other test, as omitting
it also crashed Nvim before this fix.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Problem: win_enter autocommands can close new_curwin, crashing if it was the
last window in its tabpage after removing win, or can close parent, crashing
when attempting to split it later.
Solution: remove win first, check that parent is valid after win_enter.
NOTE: This isn't actually quite right, as this means win is not in the window
list or even has a frame when triggering enter autocommands (so it's not
considered valid in the tabpage). This is addressed in later commits.
|
| | |
|
| |
|
|
| |
Problem: nvim_eval_statusline() uses "stl" from 'fillchars' with "use_statuscol_lnum".
Solution: Reorder "fillchar" else chain.
|
| |
|
| |
Minor "best practices" nudge.
|
| |
|
|
|
|
|
|
|
|
|
| |
Getting current channel info was kind of annoying via RPC. Two
functions had to be called:
1. `nvim_get_api_info` which returns `[channel_id, meta_data]`.
- This results in `channel_id = api.nvim_get_api_info()[0]`.
- Here the meta_data is sent but never used.
2. Finally call `nvim_get_chan_info(channel_id)`.
This commit reduces the need for `nvim_get_api_info` as passing 0
returns current channel info.
|
| |
|
|
|
|
|
|
|
|
|
| |
Problem:
When nvim_input is followed immediately by non-fast events on RPC, both
events and input are available after the polling done by the os_inchar()
in state_enter(), but state_enter() then chooses to process events even
if input is available, which is inconsistent with state_handle_k_event()
that stops processing events once input is available.
Solution:
Also check for available input after the os_inchar() in state_enter().
|
| |
|
|
| |
Adds support to `nvim_open_win` and `nvim_win_set_config` for creating
and manipulating split (non-floating) windows.
|
| |
|
|
| |
Allows setting the current window of a non-current tabpage
without switching tabpages.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The "priority" field of extmarks can be used to set priorities of
extmarks which dictates which highlight group a range will actually have
when there are multiple extmarks applied. However, when multiple
extmarks have the same priority, the only way to enforce an actual
priority is through the order in which the extmarks are set.
It is not always possible or desirable to set extmarks in a specific
order, however, so we add a new "subpriority" field that explicitly
enforces the ordering of extmarks that have the same priority.
For now this will be used only to enforce priority of treesitter
highlights. A single node in a treesitter tree may match multiple
captures, in which case that node will have multiple extmarks set. The
order in which captures are returned from the treesitter API is not
_necessarily_ in the same order they are defined in a query file, so we
use the new subpriority field to force that ordering.
For now subpriorites are not documented and are not meant to be used by
external code, and it only applies to ephemeral extmarks. We indicate
the "private" nature of subpriorities by prefixing the field name with
an "_".
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: Things that temporarily change/restore curwin/buf (e.g:
win_execute, some autocmds) may break assumptions that
curwin/buf is the cmdwin when "cmdwin_type != 0", causing
issues.
Solution: Expose the cmdwin's real win/buf and check that instead. Also
try to ensure these variables are NULL if "cmdwin_type == 0",
allowing them to be used directly in most cases without
checking cmdwin_type. (Sean Dewar)
Reset and save `cmdwin_old_curwin` in a similar fashion.
Apply suitable changes for API functions and add Lua tests.
https://github.com/vim/vim/commit/988f74311c26ea9917e84fbae608de226dba7e5f
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Extmarks can contain URLs which can then be drawn in any supporting UI.
In the TUI, for example, URLs are "drawn" by emitting the OSC 8 control
sequence to the TTY. On terminals which support the OSC 8 sequence this
will create clickable hyperlinks.
URLs are treated as inline highlights in the decoration subsystem, so
are included in the `DecorSignHighlight` structure. However, unlike
other inline highlights they use allocated memory which must be freed,
so they set the `ext` flag in `DecorInline` so that their lifetimes are
managed along with other allocated memory like virtual text.
The decoration subsystem then adds the URLs as a new highlight
attribute. The highlight subsystem maintains a set of unique URLs to
avoid duplicating allocations for the same string. To attach a URL to an
existing highlight attribute we call `hl_add_url` which finds the URL in
the set (allocating and adding it if it does not exist) and sets the
`url` highlight attribute to the index of the URL in the set (using an
index helps keep the size of the `HlAttrs` struct small).
This has the potential to lead to an increase in highlight attributes
if a URL is used over a range that contains many different highlight
attributes, because now each existing attribute must be combined with
the URL. In practice, however, URLs typically span a range containing a
single highlight (e.g. link text in Markdown), so this is likely just a
pathological edge case.
When a new highlight attribute is defined with a URL it is copied to all
attached UIs with the `hl_attr_define` UI event. The TUI manages its own
set of URLs (just like the highlight subsystem) to minimize allocations.
The TUI keeps track of which URL is "active" for the cell it is
printing. If no URL is active and a cell containing a URL is printed,
the opening OSC 8 sequence is emitted and that URL becomes the actively
tracked URL. If the cursor is moved while in the middle of a URL span,
we emit the terminating OSC sequence to prevent the hyperlink from
spanning multiple lines.
This does not support nested hyperlinks, but that is a rare (and,
frankly, bizarre) use case. If a valid use case for nested hyperlinks
ever presents itself we can address that issue then.
|
| | |
|
| | |
|
| |\
| |
| | |
fix(extmarks): do not remove invalid marks from decor upon deletion
|
| | | |
|
| | | |
|
| |/
|
|
| |
Followup to 07a7c0ec
|
| | |
|
| |\
| |
| | |
fix(buffer_updates): correct buffer updates when splitting empty line
|
| | |
| |
| |
| | |
fixes #11591
|
| | | |
|
| | |
| |
| |
| |
| | |
- remove helpers.cur*meths
- remove helpers.nvim
|
| | | |
|
| | | |
|
| | | |
|
| |/ |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem:
Not all Lua code is checked by stylua. Automating code-style is an
important mechanism for reducing time spent on accidental
(non-essential) complexity.
Solution:
- Enable stylua for entire `test/` directory.
- Exclude these high-churn files until this issue is resolved: https://github.com/JohnnyMorganz/StyLua/issues/829
```
test/functional/ui/decorations_spec.lua | 3560 ++++++++++++++++++++++++++++++++++++----------------
test/functional/ui/float_spec.lua | 5826 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------
test/functional/ui/multigrid_spec.lua | 1349 ++++++++++++++------
```
- Make surgical changes to these files (or add `stylua: ignore` in some
small scopes) to improve the result:
```
test/functional/vimscript/msgpack_functions_spec.lua | 1414 +++++++++++++++------
test/functional/api/buffer_spec.lua | 1389 +++++++++++----------
test/functional/api/vim_spec.lua | 2740 +++++++++++++++++++++++-----------------
```
- These "high churn" files are NOT excluded because the changes are
largely an improvement:
```
test/functional/plugin/lsp_spec.lua | 2198 ++++++++++++++++++---------------
test/functional/plugin/shada_spec.lua | 4078 +++++++++++++++++++++++++++++++++++-------------------------
test/functional/ui/cmdline_spec.lua | 1199 +++++++++++-------
test/functional/ui/popupmenu_spec.lua | 1267 +++++++++++--------
test/functional/ui/messages_spec.lua | 1643 +++++++++++++++---------
```
- TODO: how to check "all directories"? With `GLOB_DIRS *` and `/.deps/` (or
`.deps/`) in `.styluaignore`, Lua code in `.deps/` is still checked...
|
| |
|
|
|
|
| |
Problem: Unable to predict which byte-offset to place virtual text to
make it repeat visually in the wrapped part of a line.
Solution: Add a flag to nvim_buf_set_extmark() that causes virtual
text to repeat in wrapped lines.
|
| |
|
| |
It's now only used for transchar_hex(), which only needs 11 bytes.
|
| | |
|
