aboutsummaryrefslogtreecommitdiff
path: root/cmd-switch-client.c
Commit message (Collapse)AuthorAge
* Some new notifications, mainly for active pane and current window andnicm2017-05-04
| | | | | | | | | | | session: pane-mode-changed window-pane-changed client-session-changed session-window-changed From Joshua Brot.
* Get rid of the extra layer of flags and cmd_prepare() and just store thenicm2017-04-22
| | | | | | CMD_FIND_* flags in the cmd_entry and call it for the command. Commands with special requirements call it themselves and update the target for hooks to use.
* Mouse bindings and hooks set up an initial current state when running anicm2017-04-22
| | | | | | | | | | | | | | | command. This is used for the session, window and pane for all commands in the command sequence if there is no -t or -s. However, using it for all commands in the command sequence means that if the active pane or current session is changed, subsequent commands still use the previous state. So make commands which explicitly change the current state (such as neww and selectp) update it themselves for later commands. Commands which may invalidate the state (like killp) are already OK because an invalid state will be ignored. Also fill in the current state for all key bindings rather than just the mouse, so that any omissions are easier to spot.
* Store state shared between multiple commands in the queue in a sharednicm2017-04-21
| | | | structure.
* Cancel key table when switching session, unless the key is going tonicm2017-02-06
| | | | repeat. Reported by Amos Bird.
* Do not clear the key table when changing session on a client, so thatnicm2017-01-28
| | | | switch-client and friends work with bind -n.
* Make update-environment an array as well.nicm2017-01-24
|
* Nits found with clang.nicm2017-01-06
|
* Mass rename struct cmd_q to struct cmdq_item and related.nicm2016-10-16
|
* Add static in cmd-* and fix a few other nits.nicm2016-10-10
|
* I no longer use my SourceForge address so replace it.nicm2016-01-19
|
* Repair switch-client -l and switch-client with a window target.nicm2015-12-23
|
* Instead of combined flags for -c, -s, -t, split into different setsnicm2015-12-14
| | | | using an enum and simplify the parsing code.
* Use member names in cmd_entry definitions so I stop getting confusednicm2015-12-13
| | | | about the order.
* Instead of every command resolving the target (-t or -s) itself, preparenicm2015-12-13
| | | | | | | | | | | | | | | | the state (client, session, winlink, pane) for it it before entering the command. Each command provides some flags that tell the prepare step what it is expecting. This is a requirement for having hooks on commands (for example, if you hook "select-window -t1:2", the hook command should to operate on window 1:2 not whatever it thinks is the current window), and should allow some other target improvements. The old cmd_find_* functions remain for the moment but that layer will be dropped later. Joint work with Thomas Adam.
* Add key-table option to set the default key table for a session, allowsnicm2015-12-12
| | | | different key bindings for different sessions and a few other things.
* Return after changing key table.nicm2015-12-12
|
* Check alerts when session changes, from Patrick Palka.nicm2015-12-11
|
* Use ^= instead of a verbose alternative. ok nicm@mmcc2015-12-08
|
* Like options, move the environ struct into environ.c.nicm2015-10-28
|
* Move struct options into options.c.nicm2015-10-27
|
* Don't update last session when the session is unchanged, from Sina Siadat.nicm2015-09-22
|
* Add session_last_attached time and format, from Sina Siadat.nicm2015-09-10
|
* Make session_update_activity more useful and use it in more places.nicm2015-08-28
|
* Run status update on a per-client timer at status-interval.nicm2015-08-28
|
* Update environment with -E when attach-session used on an alreadynicm2015-07-06
| | | | | attached session or switch-client used on the current session. From Cam Hutchison.
* Add -E flag when attaching or switching client to bypassnicm2015-06-07
| | | | update-environment, from Steven Lu.
* Update environment when switching sessions as well as attaching, from Sinicm2015-05-07
| | | | Beaumont.
* Move the functions to convert ids from strings into session.c and window.c.nicm2015-04-25
|
* Support for multiple key tables to commands to be bound to sequences ofnicm2015-04-20
| | | | | | | keys. The default key bindings become the "prefix" table and -n the "root" table. Keys may be bound in new tables with bind -T and switch-client -T used to specify the table in which the next key should be looked up. Based on a diff from Keith Amling.
* Instead of setting up the default keys by building the key structnicm2014-10-20
| | | | | | | | | directly with a helper function in the cmd_entry, include a table of bind-key commands and pass them through the command parser and a temporary cmd_q. As well as being smaller, this will allow default bindings to be command sequences which will probably be needed soon.
* Remove the "info" message mechanism, this was only used for about fivenicm2014-04-17
| | | | | | mostly useless and annoying messages. Change those commands to silence on success like all the others. Still accept the -q command line flag and "quiet" server option for now.
* Avoid use of uninitialized variable, from Thomas Adam.nicm2014-02-12
|
* Similar to attach-session, make switch-client -t accept a window andnicm2014-01-09
| | | | pane. From Johannes Jakobsson.
* Remove the barely-used and unnecessary command check() function.nicm2013-10-10
|
* Add a command queue to standardize and simplify commands that call otherNicholas Marriott2013-03-24
| | | | | | | | | | | | | | | | | | | | | | commands and allow a command to block execution of subsequent commands. This allows run-shell and if-shell to be synchronous which has been much requested. Each client has a default command queue and commands are consumed one at a time from it. A command may suspend execution from the queue by returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() - for example run-shell does this from the callback that is fired after the job is freed. When the command queue becomes empty, command clients are automatically exited (unless attaching). A callback is also fired - this is used for nested commands in, for example, if-shell which can block execution of the client's cmdq until a new cmdq becomes empty. Also merge all the old error/info/print functions together and lose the old curclient/cmdclient distinction - a cmdq is bound to one client (or none if in the configuration file), this is a command client if c->session is NULL otherwise an attached client.
* Fix error reporting for client commands by adding a flag toNicholas Marriott2013-03-24
| | | | | cmd_find_client to tell it whether or not to show errors, sometimes it's needed and sometimes not.
* Make command exec functions return an enum rather than -1/0/1 values andNicholas Marriott2012-07-11
| | | | | | add a new value to mean "leave client running but don't attach" to fix problems with using some commands in a command sequence. Most of the work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
* Only hide flags on the current window when the session is attached, fromNicholas Marriott2012-01-21
| | | | Roland Walker.
* Add a -r flag to switch-client to toggle the client read-only flag. FromNicholas Marriott2011-08-16
| | | | Johan Commelin.
* Add a flag to cmd_find_session so that attach-session can preferNicholas Marriott2011-04-05
| | | | | unattached sessions when choosing the most recently used (if -t is not given). Suggested by claudio@.
* Clean up and simplify tmux command argument parsing.Nicholas Marriott2011-01-04
| | | | | | | | | | | | | | | | | | | Originally, tmux commands were parsed in the client process into a struct with the command data which was then serialised and sent to the server to be executed. The parsing was later moved into the server (an argv was sent from the client), but the parse step and intermediate struct was kept. This change removes that struct and the separate parse step. Argument parsing and printing is now common to all commands (in arguments.c) with each command left with just an optional check function (to validate the arguments at parse time), the exec function and a function to set up any key bindings (renamed from the old init function). This is overall more simple and consistent. There should be no changes to any commands behaviour or syntax although as this touches every command please watch for any unexpected changes.
* Don't reset the activity timer for unattached sessions every second,Nicholas Marriott2011-01-01
| | | | | | | this screws up the choice of most-recently-used. Instead, break the time update into a little function and do it when the session is attached. Pointed out by joshe@.
* Use pointer rather than index for the client's last session.Nicholas Marriott2010-12-20
|
* Track the last session for a client and add a flag to switch-client andNicholas Marriott2010-12-11
| | | | a key binding (L) to move a client back to its last session.
* Two new options:Nicholas Marriott2010-09-26
| | | | | | | | | | | | - server option "exit-unattached" makes the server exit when no clients are attached, even if sessions are present; - session option "destroy-unattached" destroys a session once no clients are attached to it. These are useful for preventing tmux remaining in the background where it is undesirable and when using tmux as a login shell to keep a limit on new sessions.
* Add -n and -p flags to switch-client to move to the next and previousNicholas Marriott2010-09-08
| | | | | | | session (yes, it doesn't match window/pane, but so what, nor does switch-client). Based on a diff long ago from "edsouza".
* Don't leak if arguments appear multiple times, from Tiago Cunha.Nicholas Marriott2010-01-23
|
* Get rid of the ugly CMD_CHFLAG macro and use a const string (eg "dDU") in theNicholas Marriott2009-11-13
| | | | command entry structs and a couple of functions to check/set the flags.
* Make all messages sent between the client and server fixed size.Nicholas Marriott2009-07-26
| | | | | | | | | | | | | | This is the first of two changes to make the protocol more resilient and less sensitive to other changes in the code, particularly with commands. The client now packs argv into a buffer and sends it to the server for parsing, rather than doing it itself and sending the parsed command data. As a side-effect this also removes a lot of now-unused command marshalling code. Mixing a server without this change and a client with or vice versa will cause tmux to hang or crash, please ensure that tmux is entirely killed before upgrading.
generated by cgit (git 2.34.1) at 2025-06-25 15:30:30 +0000