Moved action to top level.

Removed old iterations of the project and moved the files from 02-usart
to the root directory since that's the sole place where the action is
and that subproject has outgrown its initial title.

1 files changed, 0 insertions, 132 deletions

diff --git a/02-usart/include/arch/stm32l4xxx/peripherals/rcc.h b/02-usart/include/arch/stm32l4xxx/peripherals/rcc.h
deleted file mode 100644
index de7b568..0000000
--- a/02-usart/include/arch/stm32l4xxx/peripherals/rcc.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef H__RCC_
-#define H__RCC_
-
-#include "arch.h"
-#include "kern/common.h"
-#include <stdint.h>
-
-typedef struct {
-  __IO uint32_t c_r;      /* Clock control register. 0x00 */
-  __IO uint32_t icsc_r;   /* Internal clock srcs calibration register. 0x04 */
-  __IO uint32_t cfg_r;    /* clock confguration register. 0x08 */
-  __IO uint32_t pllcfg_r; /* PLL Configuration register. 0x0c */
-  __IO uint32_t pllsai1cfg_r; /* PLLSAI1 configuration register. 0x10 */
-
-  __IO uint32_t reserved_1; /* Not used. offset 0x14. */
-
-  __IO uint32_t cie_r; /* Clock interrupt enable register. 0x18 */
-  __IO uint32_t cif_r; /* Clock interrupt flag regiseter.  0x1c */
-  __IO uint32_t cic_r; /* Clock interrupt clear register.  0x20 */
-
-  __IO uint32_t reserved_2; /* Not used. offset 0x24. */
-
-  __IO uint32_t ahb1rst_r; /* AHB Peripheral 1 reset register. 0x28 */
-  __IO uint32_t ahb2rst_r; /* AHB Peripheral 2 reset register. 0x2c */
-  __IO uint32_t ahb3rst_r; /* AHB Peripheral 3 reset register. 0x30 */
-
-  __IO uint32_t reserved_3; /* Not used. offset 0x34. */
-
-#define rcc_lptim1rst (1 << 31) // Low Power Timer 1 reset
-#define rcc_opamprst  (1 << 30) // OPAMP interface reset
-#define rcc_dac1rst   (1 << 29) // DAC1 interface reset
-#define rcc_pwrrst    (1 << 28) // Power interface reset
-#define rcc_can2rst   (1 << 26) // CAN2 reset (this bit is reserved for STM32L47x/L48x devices)
-#define rcc_can1rst   (1 << 25) // CAN1 reset
-#define rcc_crsrst    (1 << 24) // CRS reset (this bit is reserved for STM32L47x/L48x devices)
-#define rcc_i2c3rst   (1 << 23) // I2C3 reset
-#define rcc_i2c2rst   (1 << 22) // I2C2 reset
-#define rcc_i2c1rst   (1 << 21) // I2C1 reset
-#define rcc_uart5rst  (1 << 20) // UART5 reset
-#define rcc_uart4rst  (1 << 19) // UART4 reset
-#define rcc_usart3rst (1 << 18) // USART3 reset
-#define rcc_usart2rst (1 << 17) // USART2 reset
-#define rcc_reserved  (1 << 16) // must be kept at reset value.
-#define rcc_spi3rst   (1 << 15) // SPI3 reset
-#define rcc_spi2rst   (1 << 14) // SPI2 reset
-#define rcc_lcdrst    (1 << 9)  // interface reset (this bit is reserved for STM32L471/L4x5 devices)
-#define rcc_tim7rst   (1 << 5)  // timer reset
-#define rcc_tim6rst   (1 << 4)  // timer reset
-#define rcc_tim5rst   (1 << 3)  // timer reset
-#define rcc_tim4rst   (1 << 2)  // timer reset
-#define rcc_tim3rst   (1 << 1)  // timer reset
-#define rcc_tim2rst   (1 << 0)  // timer reset
-  __IO uint32_t apb1rst1_r; /* APB Peripheral reset register 1. 0x38 */
-  __IO uint32_t apb1rst2_r; /* APB Peripheral reset register 2. 0x3C */
-  __IO uint32_t apb2rst_r;  /* APB Peripheral reset register.   0x40 */
-
-  __IO uint32_t reserved_4; /* Not used. offset 0x44. */
-
-#define rcc_dma1en  (1 <<  0) /* DMA1 clock enable. */
-#define rcc_dma2en  (1 <<  1) /* DMA2 clock enable. */
-#define rcc_flashen (1 <<  8) /* Flash memory interface clock enable. */
-#define rcc_crcen   (1 << 12) /* CRC clock enable. */
-#define rcc_tscen   (1 << 16) /* Touch sensing controller clock enable. */
-#define rcc_dmad2en (1 << 17) /* DMA2D clock enabled. */
-  __IO uint32_t ahb1en_r; /* AHB1 Peripheral enable register. 0x48 */
-
-#define  rcc_gpioen(port)  (1  <<  (port))
-#define  rcc_otgfsen       (1  <<  12)
-#define  rcc_adcen         (1  <<  13)
-#define  rcc_dcmien        (1  <<  14)
-#define  rcc_assen         (1  <<  16)
-#define  rcc_hashen        (1  <<  17)
-#define  rcc_rngen         (1  <<  18)
-  __IO uint32_t ahb2en_r; /* AHB2 Peripheral enable register. 0x4C */
-  __IO uint32_t ahb3en_r; /* AHB3 Peripheral enable register. 0x50 */
-
-  __IO uint32_t reserved_5; /* Not used. offset 0x54. */
-
-  __IO uint32_t apb1en1_r; /* APB1 Peripheral enable register 1. 0x58 */
-  __IO uint32_t apb1en2_r; /* APB1 Peripheral enable register 2. 0x5C */
-  __IO uint32_t apb2en_r;  /* APB2 Peripheral enable register.   0x60 */
-
-  __IO uint32_t reserved_6; /* Not used. offset 0x64. */
-
-  __IO uint32_t ahb1smen_r; /* 0x68 */
-  __IO uint32_t ahb2smen_r; /* 0x6c */
-  __IO uint32_t ahb3smen_r; /* 0x70 */
-
-  __IO uint32_t reserved_7;
-
-  __IO uint32_t apb1smen_r1; /* 0x78 */
-  __IO uint32_t apb1smen_r2; /* 0x7c */
-  __IO uint32_t apb2smen_r;  /* 0x80 */
-
-  __IO uint32_t reserved_8;
-
-  __IO uint32_t ccip_r; /* 0x88 */
-} PACKED rcc_t;
-
-static_assert(offsetof(rcc_t, ccip_r) == 0x88, "Offset check failed.");
-
-#define RCC (*(__IO rcc_t*)RCC_BASE)
-
-/* Macros to operate on the RCC registers. */
-
-/* Sets the HSE. rcc is the RCC to use, e is zero for off, non-zero for on. */
-#define set_hse(rcc, e)        \
-  do {                         \
-    if (e) {                   \
-      (rcc).c_r |= 1 << 16;    \
-    } else {                   \
-      (rcc).c_r &= ~(1 << 16); \
-    }                          \
-  } while (0)
-
-/* Sets the HSI. rcc is the RCC to use, e is zero for off, non-zero for on. */
-#define set_hsi(rcc, e)       \
-  do {                        \
-    if (e) {                  \
-      (rcc).c_r |= 1 << 8;    \
-    } else {                  \
-      (rcc).c_r &= ~(1 << 8); \
-    }                         \
-  } while (0)
-
-/* Checks to see if the hse is ready. */
-#define hse_ready(rcc) ((rcc).c_r & (1 << 17))
-
-/* Checks to see if the hse is ready. */
-#define hsi_ready(rcc) ((rcc).c_r & (1 << 10))
-
-#endif