diff options
Diffstat (limited to '02-usart/include/arch/stm32l4xxx/peripherals/usart.h')
| -rw-r--r-- | 02-usart/include/arch/stm32l4xxx/peripherals/usart.h | 204 |
1 files changed, 0 insertions, 204 deletions
diff --git a/02-usart/include/arch/stm32l4xxx/peripherals/usart.h b/02-usart/include/arch/stm32l4xxx/peripherals/usart.h deleted file mode 100644 index a1542f4..0000000 --- a/02-usart/include/arch/stm32l4xxx/peripherals/usart.h +++ /dev/null @@ -1,204 +0,0 @@ -#ifndef H__USART_ -#define H__USART_ - -#include <arch.h> -#include <stdint.h> -#include <stdarg.h> - -#include "kern/common.h" -#include "arch/stm32l4xxx/peripherals/rcc.h" -#include <assert.h> - -#define USART1 (* (usart_t*) USART1_BASE) -#define USART2 (* (usart_t*) USART2_BASE) - -/* - * Possible USART clock sources. - */ -typedef enum { - USART_CLK_SRC_PLK = 0, /* Clock derived from the SysClk. */ - USART_CLK_SRC_SYSCLK = 1, /* System clock. */ - USART_CLK_SRC_HSI16 = 2, /* 16MHz oscillator. */ - USART_CLK_SRC_LSE = 3 /* Low power 32kHz clock. */ -} usart_clk_src_t; - -typedef struct { - /* USART configuration registers 0x04 - 0x0c. */ -#define usart_ue (1 << 0) /* UART enable */ -#define usart_uesm (1 << 1) /* UART enabled in stop mode. */ -#define usart_re (1 << 2) /* reciever enabled. */ -#define usart_te (1 << 3) /* transmitter enabled. */ -#define usart_idleie (1 << 4) /* Idle interrupt enabled. */ -#define usart_rxneie (1 << 5) /* RXNEIE RXNE interrupt enable. */ -#define usart_tcie (1 << 6) -#define usart_txeie (1 << 7) -#define usart_peie (1 << 8) -#define usart_ps (1 << 9) -#define usart_pce (1 << 10) -#define usart_wake (1 << 11) -#define usart_m0 (1 << 12) -#define usart_mme (1 << 13) -#define usart_cmie (1 << 14) -#define usart_over8 (1 << 15) -#define usart_dedt (0xF << 16) -#define usart_deat (0xF << 21) -#define usart_rtoie (1 << 26) -#define usart_eobie (1 << 27) -#define usart_m1 (1 << 28) - __IO uint32_t c_r1; - __IO uint32_t c_r2; - - -#define usart_eie (1 << 0) // Error interrupt enable. -#define usart_iren (1 << 1) // IrDA mode enabled -#define usart_irlp (1 << 2) // IrDA low power -#define usart_hdsel (1 << 3) // Half duplex selection -#define usart_nack (1 << 4) // Smartcard NACK enable -#define usart_scen (1 << 5) // Smartocard mode enable -#define usart_dmar (1 << 6) // DMA enable reciever -#define usart_dmat (1 << 7) // DMA enable transmitter -#define usart_rtse (1 << 8) // RTS enable -#define usart_ctse (1 << 9) // CTS enable -#define usart_ctsie (1 << 10) // CTS interrupt enable -#define usart_onebit (1 << 11) // One sample bit method enable -#define usart_ovrdis (1 << 12) // Overrun disable -#define usart_ddre (1 << 13) // DMA Disable on reception error -#define usart_dem (1 << 14) // Driver enable mode -#define usart_dep (1 << 15) // Driver enable polarity selection -#define usart_scarcnt0 (1 << 17) -#define usart_scarcnt1 (1 << 18) -#define usart_scarcnt2 (1 << 19) -#define usart_wus0 (1 << 20) // Wakeup from STOP mode interrept flag selection -#define usart_wus1 (1 << 21) // Wakeup from STOP mode interrept flag selection -#define usart_wufie (1 << 22) // Wakeup from STOP mode interrup enable -#define usart_ucesm (1 << 23) // USART clock enable in STOP mode. -#define usart_tcbgtie (1 << 24) // Transmission complete before guard time interrupt - __IO uint32_t c_r3; - - /* USART baud rate register. */ - uint32_t br_r; - uint32_t gtp_r; - uint32_t rto_r; - uint32_t rq_r; - - /* USART ISR register. Offset = 0x1c*/ -#define usart_pe (1 << 0) // Parity error -#define usart_fe (1 << 1) // Framing error -#define usart_nf (1 << 2) // START bit noise detection flag. -#define usart_ore (1 << 3) // Overrun error -#define usart_dlie (1 << 4) // Idle line detected -#define usart_rxne (1 << 5) // Read data register not empty -#define usart_tc (1 << 6) // Transmission complete -#define usart_txe (1 << 7) // Transmit data register empty -#define usart_lbdf (1 << 8) // LIN break detection flag -#define usart_ctsif (1 << 9) // CTS interrupt flag -#define usart_cts (1 << 10) // CTS flag. -#define usart_rtof (1 << 11) // Receiever timeout -#define usart_eobf (1 << 12) // End of block flag -#define usart_abre (1 << 14) // Auto baud rate error -#define usart_abrf (1 << 15) // Auto baud rate flag -#define usart_busy (1 << 16) // Busy flag -#define usart_cmf (1 << 17) // Character match flag -#define usart_sbkf (1 << 18) // send break flag -#define usart_rwu (1 << 19) // receiver wakeup frlom mute mode. -#define usart_wuf (1 << 20) // Wakeup from stop mode flag -#define usart_teack (1 << 21) // Transmit enable acknowledge flag. -#define usart_reack (1 << 22) // Receieve enable acknowledge flag. -#define usart_tcbgt (1 << 25) // Transmission completer before guard time completion. - __IO uint32_t is_r; /* Interrupt service register. */ - -#define usart_pecf (1 << 0) // Parity error clear flag -#define usart_fecf (1 << 1) // Framing error clear flag -#define usart_ncf (1 << 2) // Noise detected clear flag -#define usart_orecf (1 << 3) // Overrun error clear flag -#define usart_idlecf (1 << 4) // Idle line detected clear flag -#define usart_tccf (1 << 6) // Transmission complete clear flag -#define usart_tcbgtcf (1 << 7) // Transmission completed before guard time clear flag -#define usart_lbdcf (1 << 8) // LIN break detection clear flag -#define usart_ctscf (1 << 9) // CTS clear flag -#define usart_rtocf (1 << 11) // Receiver timeout clear flag -#define usart_eobcf (1 << 12) // End of block clear flag -#define usart_cmcf (1 << 17) // Character match clear flag -#define usart_wucf (1 << 20) // Wakeup from Stop mode clear flag. - __IO uint32_t ic_r; - uint32_t rd_r; - uint32_t td_r; -} usart_t; - -static_assert(offsetof(usart_t, ic_r) == 0x20, "Offset assertion failed."); -static_assert(offsetof(usart_t, rd_r) == 0x24, "Offset assertion failed."); - -typedef enum { - OVERSAMPLE_8, - OVERSAMPLE_16 -} oversampling_mode_t; - -static inline void usart_set_divisor( - __IO usart_t* usart, - uint32_t usartdiv) -{ - if (usart->c_r1 & (1 << 15)) { - /* OVER8 is set. */ - usart->br_r = - (usartdiv & ~7) | - ((usartdiv & 7) >> 1); - } else { - /* OVER8 is not set. */ - usart->br_r = usartdiv; - } -} - -static inline void usart_set_oversampling_mode( - __IO usart_t* usart, - oversampling_mode_t mode) -{ - if (mode == OVERSAMPLE_8) { - usart->c_r1 |= 1 << 15; - } else { - usart->c_r1 &= ~(1 << 15); - } -} - -typedef enum { - USART_PARITY_DISABLED = 0, - USART_PARITY_EVEN = 2 << 9, - USART_PARITY_ODD = 3 << 9, -} usart_parity_t; - -typedef enum { - USART_ENABLE_TX = 0x02, - USART_ENABLE_RX = 0x01, - USART_ENABLE_DISABLED = 0x00, -} usart_enable_t; - -void usart_set_parity(__IO usart_t* usart, usart_parity_t parity); - -void usart_set_enabled(__IO usart_t* usart, usart_enable_t enabled); - -void usart_enable_dma(__IO usart_t* usart, usart_enable_t enabled); - -/* - * Send a byte on the usart, This command blocks until the data - * is fully sent. - */ -void usart_transmit_byte_sync(__IO usart_t* usart, uint8_t byte); - -void set_usart1_clock_src(__IO rcc_t* rcc, usart_clk_src_t usart_clk_src); - -void set_usart1_clock_enabled(__IO rcc_t* rcc, bool enable); - -void set_usart2_clock_src(__IO rcc_t* rcc, usart_clk_src_t usart_clk_src); - -void set_usart2_clock_enabled(__IO rcc_t* rcc, bool enable); - -void usart_transmit_bytes_sync( - __IO usart_t* usart, const uint8_t* bytes, uint32_t n); - -void usart_transmit_str_sync(__IO usart_t* usart, const char* str); - -void usart_printf(__IO usart_t* usart, const char* fmt, ...); - -void usart_vprintf(__IO usart_t* usart, const char* fmt, va_list l); - - -#endif /* H__USART_ */ |