1 files changed, 57 insertions, 48 deletions

diff --git a/src/kern/main.c b/src/kern/main.c
index 61e60c9..7c0b65d 100644
--- a/src/kern/main.c
+++ b/src/kern/main.c
@@ -35,7 +35,7 @@ volatile struct {
   signed int timetick;
   ws2812b_t* drv;
   uint8_t brightness;
-  uint8_t n_leds;
+  uint16_t n_leds;
   uint8_t off;
   uint8_t n_snow;
   uint8_t n_red;
@@ -201,7 +201,8 @@ static void reset_state()
   memset((void*)&state, 0, sizeof(state));
   state.drv = tmp;
   state.brightness = 255;
-  state.n_leds = 250;
+  state.n_leds = 300;
+  state.n_red = 100;
   state.off = 8;
   state.timetick = 10;
   state.power = 1;
@@ -211,52 +212,60 @@ static void reset_state()
 /* Main function. This gets executed from the interrupt vector defined above. */
 int main()
 {
-  klogf("Entering Main (%p).\n", main);
-
-  // systick_add_callback(on_systick, NULL);
-  // enable_systick(10000);
-  // configure_gpio();
-
-  // ir_begin_listen();
-  // enable_ir_control();
-
-  // add_ir_code_callback(RC_HIGH, printit, "RC_HIGH");
-  // add_ir_code_callback(RC_TEMP_UP, timetick_up, NULL);
-  // add_ir_code_callback(RC_DRY, set_red, NULL);
-  // add_ir_code_callback(RC_LOW, printit, "RC_LOW");
-  // add_ir_code_callback(RC_TEMP_DOWN, timetick_down, NULL);
-  // add_ir_code_callback(RC_COOL, toggle_cool, NULL);
-  // add_ir_code_callback(RC_CONTINUOUS, set_snow, "RC_CONTINUOUS");
-  // add_ir_code_callback(RC_FAN, toggle_brightness, NULL);
-  // add_ir_code_callback(RC_SLEEP, toggle_sleep, NULL);
-  // add_ir_code_callback(RC_UNITS, printit, "RC_UNITS");
-  // add_ir_code_callback(RC_TIMER, reset_state, NULL);
-  // add_ir_code_callback(RC_POWER, toggle_power, NULL);
-
-  // int ec;
-  // state.drv = ws2812b_new(SPI_SELECT_SPI1, &ec);
-
-  // if (ec || !state.drv) {
-  //   panic("Unable to create WS2812b driver :( (%d)\n", ec);
-  // }
-
-  // reset_state();
-
-  // for (int i = 0; i < state.n_leds; ++i) {
-  //   /* Clear the LED strip. */
-  //   disable_all_interrupts();
-  //   ws2812b_write_rgb_sync(state.drv, 0, 0, 0);
-  //   enable_all_interrupts();
-  // }
-  // ws2812b_latch(state.drv);
-
-  // for (;;) {
-  //   // while (!do_redraw)
-  //   //   ;
-  //   // do_redraw = 0;
-  //   if (!state.sleep) redraw();
-  // }
-  for (;;);
+  klogf("Entering Main\n");
+
+  gpio_reserved_pin_t pin3 = get_sysled();
+
+  systick_add_callback(on_systick, NULL);
+  enable_systick(10000);
+  configure_gpio();
+
+  ir_begin_listen();
+  enable_ir_control();
+
+  add_ir_code_callback(RC_HIGH, printit, "RC_HIGH");
+  add_ir_code_callback(RC_TEMP_UP, timetick_up, NULL);
+  add_ir_code_callback(RC_DRY, set_red, NULL);
+  add_ir_code_callback(RC_LOW, printit, "RC_LOW");
+  add_ir_code_callback(RC_TEMP_DOWN, timetick_down, NULL);
+  add_ir_code_callback(RC_COOL, toggle_cool, NULL);
+  add_ir_code_callback(RC_CONTINUOUS, set_snow, "RC_CONTINUOUS");
+  add_ir_code_callback(RC_FAN, toggle_brightness, NULL);
+  add_ir_code_callback(RC_SLEEP, toggle_sleep, NULL);
+  add_ir_code_callback(RC_UNITS, printit, "RC_UNITS");
+  add_ir_code_callback(RC_TIMER, reset_state, NULL);
+  add_ir_code_callback(RC_POWER, toggle_power, NULL);
+
+  int ec;
+  state.drv = ws2812b_new(SPI_SELECT_SPI1, &ec);
+
+  if (ec || !state.drv) {
+    panic("Unable to create WS2812b driver :( (%d)\n", ec);
+  }
+
+  reset_state();
+
+  for (int i = 0; i < state.n_leds; ++i) {
+    /* Clear the LED strip. */
+    disable_all_interrupts();
+    ws2812b_write_rgb_sync(state.drv, 0, 0, 0);
+    enable_all_interrupts();
+  }
+  ws2812b_latch(state.drv);
+
+  for (int i = 0; ; ++ i) {
+    if (i % 64 == 0) {
+      set_gpio_pin_high(pin3);
+    }
+    // while (!do_redraw)
+    //   ;
+    // do_redraw = 0;
+    if (!state.sleep) redraw();
+
+    if (i % 64 == 0) {
+      set_gpio_pin_low(pin3);
+    }
+  }
 }
 
 #endif