| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
| |
The crate containing the entry point is called alacritty, and the crate
containing everything else is called alacritty_terminal.
|
| |
|
|
|
|
|
|
|
|
|
| |
This resolves performance issues with the `update_lines` method that
were caused by excessive updates without underlines or strikeout
present.
This also resolves a bug that was causing the underline and strikeout to
extend beyond the end of line in some rare cases.
This fixes #114.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This completely reworks URL highlighting to fix two issues which were
caused by the original approach.
The primary issues that were not straight-forward to resolve with the
previous implementation were about handling the URL highlighted content
moving while the highlight is active.
This lead to issues with highlighting with scrolling and when the
display offset was not 0.
The new approach sticks closely to prior art done for the selection,
where the selection is tracked on the grid and updated whenever the
buffer is rotated.
The truncation of URLs was incorrectly assuming input to be just a
single codepoint wide to truncate the end of URLs with unmatching
closing parenthesis. This is now handled properly using Rust's built-in
Unicode support.
This fixes #2231.
This fixes #2225.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This changes the cursor whenever it moves to a cell which contains
part of a URL.
When a URL is hovered over, all characters that are recognized as part
of the URL will be underlined and the mouse cursor shape will be
changed. After the cursor leaves the URL, the previous hover state is
restored.
This also changes the behavior when clicking an illegal character right
in front of a URL. Previously this would still launch the URL, but strip
the illegal character. Now these clicks are ignored to make sure there's
no mismatch between underline and legal URL click positions
|
| |
|
|
| |
This removes all inclusive range code since it has been recently
stabilized in the standard lib.
|
| |
|
|
|
| |
This resolves a lot of NLL issues, however full NLL will be necessary to
handle a couple of remaining issues.
|
| |
|
|
| |
This resolves all existing clippy issues and removes some old `allow`
annotations which aren't neccesary anymore.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds the option to automatically launch URLs with a specified
program when clicking on them.
The config option `mouse.url_launcher` has been added to specify which
program should be used to open the URL. The URL is always passed as the
last parameter to the specified command.
It is not always desired for URLs to open automatically when clicking on
them. To resolve this a new `modifiers` field has been introduced to the
config, which allows specifying which keyboard modifiers need to be held
down to launch URLs in the specified launcher.
Some tests have been added to make sure that the edge-cases of the URL
parsing are protected against future regressions. To make testing easier
the parsing method has been moved into the `SemanticSearch` trait. The
name of the trait has also been changed to just `Search` and it has been
moved to `src/term/mod.rs` to fit the additional functionality.
This fixes #113.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Whenever the viewport is scrolled, the selection is rotated to make sure
that it moves with the viewport. However this did not correctly handle
the underflow that happens when the selection goes below 0.
This resolves that problem for the selection by moving the internal line
representation to an isize, thus correctly keeping track of the
selection start/end points even when they have a negative index. Once
the selection is converted to a span, the lines are clamped to the
visible region.
This fixes #1640 and fixes #1643.
|
| |
|
|
|
|
| |
There were some unneeded codeblocks and TODO/XXX comments in the code
that have been removed. All issues marked with TODO/XXX have either been
already resolved or tracking issues exist.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Selections now *mostly* work. They move as the buffer scrolls, copying
works as it should, and it looks like the different selection modes
behave properly as well.
The new Selection implementation uses buffer coordinates instead of
screen coordinates. This leads to doing a transform from mouse input to
update the selection, and back to screen coordinates when displaying the
selection. Scrolling the selection is fast because the grid is already
operating in buffer coordinates.
There are several bugs to address:
* A _partially_ visible selection will lead to a crash since the drawing
routine converts selection coordinates to screen coordinates. The
solution will be to clip the coordinates at draw time.
* A selection scrolling off the buffer in either direction leads to
indexing out-of-bounds. The solution again is to clip, but this needs
to be done within Selection::rotate by passing a max limit. It may
also need a return type to indicate that the selection is no longer
visible and should be discarded.
* A selection scrolling out of a logical scrolling region is not
clipped. A temporary and robust workaround is to simply discard the
selection in the case of scrolling in a region.
wip selections
fix issue with line selection
selection mostly working
need to support selection not being on the screen at draw time
Fix selection_to_string
Uncomment tests
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Unwrapping inside the config file parsing can lead to some issues that
prevent us from falling back to a default configuration file.
One instance of that issue was mentioned in #1135.
Now all instances of `unwrap()` have been removed and replaced with
proper error handling. This will make the config more robust and
prevents live reload from silently breaking while alacritty is running.
This also fixes a few currently existing clippy issues.
Clippy added an additonal lint which complains about `MyStruct { field:
field }`.
These issues have been fixed, except for some false-positives and issues
in external macros which will probably be fixed with future updates (rust-lang-nursery/bitflags#149)
|
| |
|
|
| |
This commit adds clippy as a required step of the build process. To make
this possible, all existing clippy issues have been resolved.
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
| |
According to:
http://invisible-island.net/xterm/ctlseqs/ctlseqs.html#h2-Mouse-Tracking
|
| | |
|
| |
|
|
|
|
| |
This adds the ability to click and drag with the mouse and have the
effect of visually selecting text. The ability to copy the selection
into a clipboard buffer is not yet implemented.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ref tests use a recording of the terminal protocol and a serialization
of the grid state to check that the parsing and action handling systems
produce the correct result. Ref tests may be recorded by running
alacritty with `--ref-test` and closing the terminal by using the window
"X" button. At that point, the recording is fully written to disk, and a
serialization of important state is recorded. Those files should be
moved to an appropriate folder in the `tests/ref/` tree, and the
`ref_test!` macro invocation should be updated accordingly.
A couple of changes were necessary to make this work:
* Ref tests shouldn't create a pty; the pty was refactored out of the
`Term` type.
* Repeatable lines/cols were needed; on startup, the terminal is resized
* by default to 80x24 though that may be changed by passing
`--dimensions w h`.
* Calculating window size based on desired rows/columns and font metrics
required making load_font callable multiple times.
* Refactor types into library crate so they may be imported in an
integration test.
* A whole bunch of types needed symmetric serialization and
deserialization. Mostly this was just adding derives, but the custom
deserialization of Rgb had to change to a deserialize_with function.
This initially adds one ref test as a sanity check, and more will be
added in subsequent commits. This initial ref tests just starts the
terminal and runs `ll`.
|
| |
|
|
|
|
|
|
|
|
|
| |
The previous scrolling + scroll region implementation exhibited display
corruption bugs in several applications including tmux, irssi, htop, and
vim. The new implementation doesn't seem to suffer from any of those
issues.
This implementation is able to `find /usr` on my machine (nearly 600k
lines) in ~2.0 seconds while st is able to do the same in ~2.2 seconds.
Alacritty is officially faster!
|
| |
|
|
|
|
|
| |
Previous version of serde no longer worked; cargo packages were updated
as a result. `Zero` and `One` traits were deprecated. Use of those was
removed. The `Step` trait gained a lot more methods, and the index::$ty
implementations were updated.
|
|
|
The grid and term modules already rely on the index types, and ansi is
about to be updated with strongly typed APIs. Since Cursor, Line, and
Column are fundamental to the code in several modules, namespacing them
under one of them seems less correct than a module that stands by
itself.
|
