diff options
Diffstat (limited to 'runtime/lua/vim/_meta/options.lua')
| -rw-r--r-- | runtime/lua/vim/_meta/options.lua | 652 |
1 files changed, 385 insertions, 267 deletions
diff --git a/runtime/lua/vim/_meta/options.lua b/runtime/lua/vim/_meta/options.lua index 38ab66c96d..209c27cfd8 100644 --- a/runtime/lua/vim/_meta/options.lua +++ b/runtime/lua/vim/_meta/options.lua @@ -137,8 +137,9 @@ vim.bo.ai = vim.bo.autoindent --- `timestamp` --- If this option has a local value, use this command to switch back to --- using the global value: ---- ``` ---- :set autoread< +--- +--- ```vim +--- set autoread< --- ``` --- --- @@ -198,10 +199,11 @@ vim.go.awa = vim.go.autowriteall --- --- Normally this option would be set in the vimrc file. Possibly --- depending on the terminal name. Example: ---- ``` ---- :if $TERM ==# "xterm" ---- : set background=dark ---- :endif +--- +--- ```vim +--- if $TERM ==# "xterm" +--- set background=dark +--- endif --- ``` --- When this option is changed, the default settings for the highlight groups --- will change. To use other settings, place ":highlight" commands AFTER @@ -348,14 +350,16 @@ vim.go.bkc = vim.go.backupcopy --- - Environment variables are expanded `:set_env`. --- - Careful with '\' characters, type one before a space, type two to --- get one in the option (see `option-backslash`), for example: ---- ``` ---- :set bdir=c:\\tmp,\ dir\\,with\\,commas,\\\ dir\ with\ spaces +--- +--- ```vim +--- set bdir=c:\\tmp,\ dir\\,with\\,commas,\\\ dir\ with\ spaces --- ``` --- --- See also 'backup' and 'writebackup' options. --- If you want to hide your backup files on Unix, consider this value: ---- ``` ---- :set backupdir=./.backup,~/.backup,.,/tmp +--- +--- ```vim +--- set backupdir=./.backup,~/.backup,.,/tmp --- ``` --- You must create a ".backup" directory in each directory and in your --- home directory for this to work properly. @@ -381,8 +385,9 @@ vim.go.bdir = vim.go.backupdir --- If you like to keep a lot of backups, you could use a BufWritePre --- autocommand to change 'backupext' just before writing the file to --- include a timestamp. ---- ``` ---- :au BufWritePre * let &bex = '-' .. strftime("%Y%b%d%X") .. '~' +--- +--- ```vim +--- au BufWritePre * let &bex = '-' .. strftime("%Y%b%d%X") .. '~' --- ``` --- Use 'backupdir' to put the backup in a different directory. --- @@ -409,7 +414,7 @@ vim.go.bex = vim.go.backupext --- $HOME you must expand it explicitly, e.g.: --- --- ```vim ---- :let &backupskip = escape(expand('$HOME'), '\') .. '/tmp/*' +--- let &backupskip = escape(expand('$HOME'), '\') .. '/tmp/*' --- ``` --- Note that the default also makes sure that "crontab -e" works (when a --- backup would be made by renaming the original file crontab won't see @@ -710,8 +715,9 @@ vim.go.cdh = vim.go.cdhome --- If the default value taken from $CDPATH is not what you want, include --- a modified version of the following command in your vimrc file to --- override it: ---- ``` ---- :let &cdpath = ',' .. substitute(substitute($CDPATH, '[, ]', '\\\0', 'g'), ':', ',', 'g') +--- +--- ```vim +--- let &cdpath = ',' .. substitute(substitute($CDPATH, '[, ]', '\\\0', 'g'), ':', ',', 'g') --- ``` --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. @@ -727,9 +733,10 @@ vim.go.cd = vim.go.cdpath --- Only non-printable keys are allowed. --- The key can be specified as a single character, but it is difficult to --- type. The preferred way is to use the <> notation. Examples: ---- ``` ---- :exe "set cedit=\\<C-Y>" ---- :exe "set cedit=\\<Esc>" +--- +--- ```vim +--- exe "set cedit=\\<C-Y>" +--- exe "set cedit=\\<Esc>" --- ``` --- `Nvi` also has this option, but it only uses the first character. --- See `cmdwin`. @@ -763,7 +770,8 @@ vim.bo.channel = vim.o.channel --- is done internally by Vim, 'charconvert' is not used for this. --- Also used for Unicode conversion. --- Example: ---- ``` +--- +--- ```vim --- set charconvert=CharConvert() --- fun CharConvert() --- system("recode " @@ -829,7 +837,8 @@ vim.bo.cino = vim.bo.cinoptions --- Keywords that are interpreted as a C++ scope declaration by `cino-g`. --- Useful e.g. for working with the Qt framework that defines additional --- scope declarations "signals", "public slots" and "private slots": ---- ``` +--- +--- ```vim --- set cinscopedecls+=signals,public\ slots,private\ slots --- ``` --- @@ -916,10 +925,12 @@ vim.go.cwh = vim.go.cmdwinheight --- text. Will make screen redrawing slower. --- The screen column can be an absolute number, or a number preceded with --- '+' or '-', which is added to or subtracted from 'textwidth'. ---- ``` ---- :set cc=+1 " highlight column after 'textwidth' ---- :set cc=+1,+2,+3 " highlight three columns after 'textwidth' ---- :hi ColorColumn ctermbg=lightgrey guibg=lightgrey +--- +--- ```vim +--- +--- set cc=+1 " highlight column after 'textwidth' +--- set cc=+1,+2,+3 " highlight three columns after 'textwidth' +--- hi ColorColumn ctermbg=lightgrey guibg=lightgrey --- ``` --- --- When 'textwidth' is zero then the items with '-' and '+' are not used. @@ -941,8 +952,9 @@ vim.wo.cc = vim.wo.colorcolumn --- the GUI it is always possible and Vim limits the number of columns to --- what fits on the screen. You can use this command to get the widest --- window possible: ---- ``` ---- :set columns=9999 +--- +--- ```vim +--- set columns=9999 --- ``` --- Minimum value is 12, maximum value is 10000. --- @@ -985,8 +997,9 @@ vim.bo.cms = vim.bo.commentstring --- kspell use the currently active spell checking `spell` --- k{dict} scan the file {dict}. Several "k" flags can be given, --- patterns are valid too. For example: ---- ``` ---- :set cpt=k/usr/dict/*,k~/spanish +--- +--- ```vim +--- set cpt=k/usr/dict/*,k~/spanish --- ``` --- s scan the files given with the 'thesaurus' option --- s{tsr} scan the file {tsr}. Several "s" flags can be given, patterns @@ -1419,7 +1432,8 @@ vim.wo.crb = vim.wo.cursorbind --- slower. --- If you only want the highlighting in the current window you can use --- these autocommands: ---- ``` +--- +--- ```vim --- au WinLeave * set nocursorline nocursorcolumn --- au WinEnter * set cursorline cursorcolumn --- ``` @@ -1502,7 +1516,8 @@ vim.go.debug = vim.o.debug --- ``` --- When using the ":set" command, you need to double the backslashes! --- To avoid that use `:let` with a single quote string: ---- ``` +--- +--- ```vim --- let &l:define = '^\s*\ze\k\+\s*=\s*function(' --- ``` --- @@ -1681,11 +1696,12 @@ vim.go.dex = vim.go.diffexpr --- histogram histogram diff algorithm --- --- Examples: ---- ``` ---- :set diffopt=internal,filler,context:4 ---- :set diffopt= ---- :set diffopt=internal,filler,foldcolumn:3 ---- :set diffopt-=internal " do NOT use the internal diff parser +--- +--- ```vim +--- set diffopt=internal,filler,context:4 +--- set diffopt= +--- set diffopt=internal,filler,foldcolumn:3 +--- set diffopt-=internal " do NOT use the internal diff parser --- ``` --- --- @@ -1736,8 +1752,9 @@ vim.go.dg = vim.go.digraph --- - Environment variables are expanded `:set_env`. --- - Careful with '\' characters, type one before a space, type two to --- get one in the option (see `option-backslash`), for example: ---- ``` ---- :set dir=c:\\tmp,\ dir\\,with\\,commas,\\\ dir\ with\ spaces +--- +--- ```vim +--- set dir=c:\\tmp,\ dir\\,with\\,commas,\\\ dir\ with\ spaces --- ``` --- --- Editing the same file twice will result in a warning. Using "/tmp" on @@ -1924,8 +1941,9 @@ vim.go.efm = vim.go.errorformat --- When set to "all" or when "all" is one of the items, all autocommand --- events are ignored, autocommands will not be executed. --- Otherwise this is a comma-separated list of event names. Example: ---- ``` ---- :set ei=WinEnter,WinLeave +--- +--- ```vim +--- set ei=WinEnter,WinLeave --- ``` --- --- @@ -2021,7 +2039,8 @@ vim.bo.fenc = vim.bo.fileencoding --- "ucs-bom", which requires the BOM to be present). If you prefer --- another encoding use an BufReadPost autocommand event to test if your --- preferred encoding is to be used. Example: ---- ``` +--- +--- ```vim --- au BufReadPost * if search('\S', 'w') == 0 | --- \ set fenc=iso-2022-jp | endif --- ``` @@ -2031,8 +2050,9 @@ vim.bo.fenc = vim.bo.fileencoding --- not used. --- Note that 'fileencodings' is not used for a new file, the global value --- of 'fileencoding' is used instead. You can set it with: ---- ``` ---- :setglobal fenc=iso-8859-2 +--- +--- ```vim +--- setglobal fenc=iso-8859-2 --- ``` --- This means that a non-existing file may get a different encoding than --- an empty file. @@ -2156,14 +2176,12 @@ vim.go.fic = vim.go.fileignorecase --- this use the ":filetype on" command. `:filetype` --- Setting this option to a different value is most useful in a modeline, --- for a file for which the file type is not automatically recognized. ---- Example, for in an IDL file: ---- ``` +--- Example, for in an IDL file: >c --- /* vim: set filetype=idl : */ --- ``` --- `FileType` `filetypes` --- When a dot appears in the value then this separates two filetype ---- names. Example: ---- ``` +--- names. Example: >c --- /* vim: set filetype=c.doxygen : */ --- ``` --- This will use the "c" filetype first, then the "doxygen" filetype. @@ -2216,8 +2234,9 @@ vim.bo.ft = vim.bo.filetype --- default to single-byte alternatives. --- --- Example: ---- ``` ---- :set fillchars=stl:\ ,stlnc:\ ,vert:│,fold:·,diff:- +--- +--- ```vim +--- set fillchars=stl:\ ,stlnc:\ ,vert:│,fold:·,diff:- --- ``` --- --- For the "stl", "stlnc", "foldopen", "foldclose" and "foldsep" items @@ -2475,8 +2494,9 @@ vim.wo.fdt = vim.wo.foldtext --- it yet! --- --- Example: ---- ``` ---- :set formatexpr=mylang#Format() +--- +--- ```vim +--- set formatexpr=mylang#Format() --- ``` --- This will invoke the mylang#Format() function in the --- autoload/mylang.vim file in 'runtimepath'. `autoload` @@ -2492,7 +2512,8 @@ vim.wo.fdt = vim.wo.foldtext --- --- If the expression starts with s: or `<SID>`, then it is replaced with --- the script ID (`local-function`). Example: ---- ``` +--- +--- ```vim --- set formatexpr=s:MyFormatExpr() --- set formatexpr=<SID>SomeFormatExpr() --- ``` @@ -2618,8 +2639,9 @@ vim.go.gfm = vim.go.grepformat --- `option-backslash` about including spaces and backslashes. --- When your "grep" accepts the "-H" argument, use this to make ":grep" --- also work well with a single file: ---- ``` ---- :set grepprg=grep\ -nH +--- +--- ```vim +--- set grepprg=grep\ -nH --- ``` --- Special value: When 'grepprg' is set to "internal" the `:grep` command --- works like `:vimgrep`, `:lgrep` like `:lvimgrep`, `:grepadd` like @@ -2641,12 +2663,14 @@ vim.go.gp = vim.go.grepprg --- terminals. See `tui-cursor-shape`. --- --- To disable cursor-styling, reset the option: ---- ``` ---- :set guicursor= +--- +--- ```vim +--- set guicursor= --- ``` --- To enable mode shapes, "Cursor" highlight, and blinking: ---- ``` ---- :set guicursor=n-v-c:block,i-ci-ve:ver25,r-cr:hor20,o:hor50 +--- +--- ```vim +--- set guicursor=n-v-c:block,i-ci-ve:ver25,r-cr:hor20,o:hor50 --- \,a:blinkwait700-blinkoff400-blinkon250-Cursor/lCursor --- \,sm:block-blinkwait175-blinkoff150-blinkon175 --- ``` @@ -2680,8 +2704,9 @@ vim.go.gp = vim.go.grepprg --- the cursor is shown and blinkoff is the time that the --- cursor is not shown. Times are in msec. When one of --- the numbers is zero, there is no blinking. E.g.: ---- ``` ---- :set guicursor=n:blinkon0 +--- +--- ```vim +--- set guicursor=n:blinkon0 --- ``` --- - Default is "blinkon0" for each mode. --- {group-name} @@ -2721,9 +2746,10 @@ vim.go.gp = vim.go.grepprg --- blinking: "a:blinkon0" --- --- Examples of cursor highlighting: ---- ``` ---- :highlight Cursor gui=reverse guifg=NONE guibg=NONE ---- :highlight Cursor gui=NONE guifg=bg guibg=fg +--- +--- ```vim +--- highlight Cursor gui=reverse guifg=NONE guibg=NONE +--- highlight Cursor gui=NONE guifg=bg guibg=fg --- ``` --- --- @@ -2743,8 +2769,9 @@ vim.go.gcr = vim.go.guicursor --- precede it with a backslash. Setting an option requires an extra --- backslash before a space and a backslash. See also --- `option-backslash`. For example: ---- ``` ---- :set guifont=Screen15,\ 7x13,font\\,with\\,commas +--- +--- ```vim +--- set guifont=Screen15,\ 7x13,font\\,with\\,commas --- ``` --- will make Vim try to use the font "Screen15" first, and if it fails it --- will try to use "7x13" and then "font,with,commas" instead. @@ -2757,16 +2784,18 @@ vim.go.gcr = vim.go.guicursor --- will try to find the related bold and italic fonts. --- --- For Win32 and Mac OS: ---- ``` ---- :set guifont=* +--- +--- ```vim +--- set guifont=* --- ``` --- will bring up a font requester, where you can pick the font you want. --- --- The font name depends on the GUI used. --- --- For Mac OSX you can use something like this: ---- ``` ---- :set guifont=Monaco:h10 +--- +--- ```vim +--- set guifont=Monaco:h10 --- ``` --- *E236* --- Note that the fonts must be mono-spaced (all characters have the same @@ -2793,9 +2822,10 @@ vim.go.gcr = vim.go.guicursor --- - A '_' can be used in the place of a space, so you don't need to use --- backslashes to escape the spaces. --- - Examples: ---- ``` ---- :set guifont=courier_new:h12:w5:b:cRUSSIAN ---- :set guifont=Andale_Mono:h7.5:w4.5 +--- +--- ```vim +--- set guifont=courier_new:h12:w5:b:cRUSSIAN +--- set guifont=Andale_Mono:h7.5:w4.5 --- ``` --- --- @@ -2949,8 +2979,9 @@ vim.go.gtl = vim.go.guitablabel --- pages line. When empty Vim will use a default tooltip. --- This option is otherwise just like 'guitablabel' above. --- You can include a line break. Simplest method is to use `:let`: ---- ``` ---- :let &guitabtooltip = "line one\nline two" +--- +--- ```vim +--- let &guitabtooltip = "line one\nline two" --- ``` --- --- @@ -2994,8 +3025,9 @@ vim.go.hh = vim.go.helpheight --- another language, but that will only find tags that exist in that --- language and not in the English help. --- Example: ---- ``` ---- :set helplang=de,it +--- +--- ```vim +--- set helplang=de,it --- ``` --- This will first search German, then Italian and finally English help --- files. @@ -3131,8 +3163,9 @@ vim.go.imd = vim.go.imdisable --- 2 :lmap is off and IM is ON --- To always reset the option to zero when leaving Insert mode with <Esc> --- this can be used: ---- ``` ---- :inoremap <ESC> <ESC>:set iminsert=0<CR> +--- +--- ```vim +--- inoremap <ESC> <ESC>:set iminsert=0<CR> --- ``` --- This makes :lmap and IM turn off automatically when leaving Insert --- mode. @@ -3206,15 +3239,17 @@ vim.go.inc = vim.go.include --- Expression to be used to transform the string found with the 'include' --- option to a file name. Mostly useful to change "." to "/" for Java: ---- ``` ---- :setlocal includeexpr=substitute(v:fname,'\\.','/','g') +--- +--- ```vim +--- setlocal includeexpr=substitute(v:fname,'\\.','/','g') --- ``` --- The "v:fname" variable will be set to the file name that was detected. --- Note the double backslash: the `:set` command first halves them, then --- one remains in the value, where "\." matches a dot literally. For --- simple character replacements `tr()` avoids the need for escaping: ---- ``` ---- :setlocal includeexpr=tr(v:fname,'.','/') +--- +--- ```vim +--- setlocal includeexpr=tr(v:fname,'.','/') --- ``` --- --- Also used for the `gf` command if an unmodified file name can't be @@ -3223,7 +3258,8 @@ vim.go.inc = vim.go.include --- --- If the expression starts with s: or `<SID>`, then it is replaced with --- the script ID (`local-function`). Example: ---- ``` +--- +--- ```vim --- setlocal includeexpr=s:MyIncludeExpr(v:fname) --- setlocal includeexpr=<SID>SomeIncludeExpr(v:fname) --- ``` @@ -3262,7 +3298,8 @@ vim.bo.inex = vim.bo.includeexpr --- If you don't want to turn 'hlsearch' on, but want to highlight all --- matches while searching, you can turn on and off 'hlsearch' with --- autocmd. Example: ---- ``` +--- +--- ```vim --- augroup vimrc-incsearch-highlight --- autocmd! --- autocmd CmdlineEnter /,\? :set hlsearch @@ -3295,7 +3332,8 @@ vim.go.is = vim.go.incsearch --- --- If the expression starts with s: or `<SID>`, then it is replaced with --- the script ID (`local-function`). Example: ---- ``` +--- +--- ```vim --- set indentexpr=s:MyIndentExpr() --- set indentexpr=<SID>SomeIndentExpr() --- ``` @@ -3311,8 +3349,9 @@ vim.go.is = vim.go.incsearch --- not change the text, jump to another window, etc. Afterwards the --- cursor position is always restored, thus the cursor may be moved. --- Normally this option would be set to call a function: ---- ``` ---- :set indentexpr=GetMyIndent() +--- +--- ```vim +--- set indentexpr=GetMyIndent() --- ``` --- Error messages will be suppressed, unless the 'debug' option contains --- "msg". @@ -3540,9 +3579,10 @@ vim.go.km = vim.go.keymodel --- a [count] for the "K" command to a section number. --- See `option-backslash` about including spaces and backslashes. --- Example: ---- ``` ---- :set keywordprg=man\ -s ---- :set keywordprg=:Man +--- +--- ```vim +--- set keywordprg=man\ -s +--- set keywordprg=:Man --- ``` --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. @@ -3569,12 +3609,14 @@ vim.go.kp = vim.go.keywordprg --- security reasons. --- --- Example (for Greek, in UTF-8): *greek* ---- ``` ---- :set langmap=ΑA,ΒB,ΨC,ΔD,ΕE,ΦF,ΓG,ΗH,ΙI,ΞJ,ΚK,ΛL,ΜM,ΝN,ΟO,ΠP,QQ,ΡR,ΣS,ΤT,ΘU,ΩV,WW,ΧX,ΥY,ΖZ,αa,βb,ψc,δd,εe,φf,γg,ηh,ιi,ξj,κk,λl,μm,νn,οo,πp,qq,ρr,σs,τt,θu,ωv,ςw,χx,υy,ζz +--- +--- ```vim +--- set langmap=ΑA,ΒB,ΨC,ΔD,ΕE,ΦF,ΓG,ΗH,ΙI,ΞJ,ΚK,ΛL,ΜM,ΝN,ΟO,ΠP,QQ,ΡR,ΣS,ΤT,ΘU,ΩV,WW,ΧX,ΥY,ΖZ,αa,βb,ψc,δd,εe,φf,γg,ηh,ιi,ξj,κk,λl,μm,νn,οo,πp,qq,ρr,σs,τt,θu,ωv,ςw,χx,υy,ζz --- ``` --- Example (exchanges meaning of z and y for commands): ---- ``` ---- :set langmap=zy,yz,ZY,YZ +--- +--- ```vim +--- set langmap=zy,yz,ZY,YZ --- ``` --- --- The 'langmap' option is a list of parts, separated with commas. Each @@ -3607,28 +3649,32 @@ vim.go.lmap = vim.go.langmap --- Language to use for menu translation. Tells which file is loaded --- from the "lang" directory in 'runtimepath': ---- ``` +--- +--- ```vim --- "lang/menu_" .. &langmenu .. ".vim" --- ``` --- (without the spaces). For example, to always use the Dutch menus, no --- matter what $LANG is set to: ---- ``` ---- :set langmenu=nl_NL.ISO_8859-1 +--- +--- ```vim +--- set langmenu=nl_NL.ISO_8859-1 --- ``` --- When 'langmenu' is empty, `v:lang` is used. --- Only normal file name characters can be used, `/\*?[|<>` are illegal. --- If your $LANG is set to a non-English language but you do want to use --- the English menus: ---- ``` ---- :set langmenu=none +--- +--- ```vim +--- set langmenu=none --- ``` --- This option must be set before loading menus, switching on filetype --- detection or syntax highlighting. Once the menus are defined setting --- this option has no effect. But you could do this: ---- ``` ---- :source $VIMRUNTIME/delmenu.vim ---- :set langmenu=de_DE.ISO_8859-1 ---- :source $VIMRUNTIME/menu.vim +--- +--- ```vim +--- source $VIMRUNTIME/delmenu.vim +--- set langmenu=de_DE.ISO_8859-1 +--- source $VIMRUNTIME/menu.vim --- ``` --- Warning: This deletes all menus that you defined yourself! --- @@ -3701,8 +3747,9 @@ vim.wo.lbr = vim.wo.linebreak --- to use the size for the GUI, put the command in your `gvimrc` file. --- Vim limits the number of lines to what fits on the screen. You can --- use this command to get the tallest window possible: ---- ``` ---- :set lines=999 +--- +--- ```vim +--- set lines=999 --- ``` --- Minimum value is 2, maximum value is 1000. --- @@ -3771,8 +3818,9 @@ vim.go.lw = vim.go.lispwords --- The cursor is displayed at the start of the space a Tab character --- occupies, not at the end as usual in Normal mode. To get this cursor --- position while displaying Tabs with spaces, use: ---- ``` ---- :set list lcs=tab:\ \ +--- +--- ```vim +--- set list lcs=tab:\ \ --- ``` --- --- Note that list mode will also affect formatting (set with 'textwidth' @@ -3837,8 +3885,9 @@ vim.wo.list = vim.o.list --- leading spaces are blank. Overrides the "space" and --- "multispace" settings for leading spaces. You can --- combine it with "tab:", for example: ---- ``` ---- :set listchars+=tab:>-,lead:. +--- +--- ```vim +--- set listchars+=tab:>-,lead:. --- ``` --- --- *lcs-leadmultispace* @@ -3878,7 +3927,8 @@ vim.wo.list = vim.o.list --- be used. All characters must be single width. --- --- Each character can be specified as hex: ---- ``` +--- +--- ```vim --- set listchars=eol:\\x24 --- set listchars=eol:\\u21b5 --- set listchars=eol:\\U000021b5 @@ -3887,10 +3937,11 @@ vim.wo.list = vim.o.list --- must be exactly 2 for \\x, 4 for \\u and 8 for \\U. --- --- Examples: ---- ``` ---- :set lcs=tab:>-,trail:- ---- :set lcs=tab:>-,eol:<,nbsp:% ---- :set lcs=extends:>,precedes:< +--- +--- ```vim +--- set lcs=tab:>-,trail:- +--- set lcs=tab:>-,eol:<,nbsp:% +--- set lcs=extends:>,precedes:< --- ``` --- `hl-NonText` highlighting will be used for "eol", "extends" and --- "precedes". `hl-Whitespace` for "nbsp", "space", "tab", "multispace", @@ -3955,8 +4006,9 @@ vim.go.mef = vim.go.makeef --- This would be mostly useful when you use MS-Windows. If iconv is --- enabled, setting 'makeencoding' to "char" has the same effect as --- setting to the system locale encoding. Example: ---- ``` ---- :set makeencoding=char " system locale is used +--- +--- ```vim +--- set makeencoding=char " system locale is used --- ``` --- --- @@ -3977,13 +4029,15 @@ vim.go.menc = vim.go.makeencoding --- Note that a '|' must be escaped twice: once for ":set" and once for --- the interpretation of a command. When you use a filter called --- "myfilter" do it like this: ---- ``` ---- :set makeprg=gmake\ \\\|\ myfilter +--- +--- ```vim +--- set makeprg=gmake\ \\\|\ myfilter --- ``` --- The placeholder "$*" can be given (even multiple times) to specify --- where the arguments will be included, for example: ---- ``` ---- :set makeprg=latex\ \\\\nonstopmode\ \\\\input\\{$*} +--- +--- ```vim +--- set makeprg=latex\ \\\\nonstopmode\ \\\\input\\{$*} --- ``` --- This option cannot be set from a `modeline` or in the `sandbox`, for --- security reasons. @@ -4003,13 +4057,15 @@ vim.go.mp = vim.go.makeprg --- The characters must be separated by a colon. --- The pairs must be separated by a comma. Example for including '<' and --- '>' (for HTML): ---- ``` ---- :set mps+=<:> +--- +--- ```vim +--- set mps+=<:> --- ``` --- A more exotic example, to jump between the '=' and ';' in an --- assignment, useful for languages like C and Java: ---- ``` ---- :au FileType c,cpp,java set mps+==:; +--- +--- ```vim +--- au FileType c,cpp,java set mps+==:; --- ``` --- For a more advanced way of using "%", see the matchit.vim plugin in --- the $VIMRUNTIME/plugin directory. `add-local-help` @@ -4117,8 +4173,9 @@ vim.go.mis = vim.go.menuitems --- The languages for which these numbers are important are Italian and --- Hungarian. The default works for when you have about 512 Mbyte. If --- you have 1 Gbyte you could use: ---- ``` ---- :set mkspellmem=900000,3000,800 +--- +--- ```vim +--- set mkspellmem=900000,3000,800 --- ``` --- If you have less than 512 Mbyte `:mkspell` may fail for some --- languages, no matter what you set 'mkspellmem' to. @@ -4213,8 +4270,9 @@ vim.go.more = vim.o.more --- Enables mouse support. For example, to enable the mouse in Normal mode --- and Visual mode: ---- ``` ---- :set mouse=nv +--- +--- ```vim +--- set mouse=nv --- ``` --- --- To temporarily disable mouse support, hold the shift key while using @@ -4306,19 +4364,20 @@ vim.go.mh = vim.go.mousehide --- See `mouse-overview`. But mappings are NOT used for modeless selection. --- --- Example: ---- ``` ---- :map <S-LeftMouse> <RightMouse> ---- :map <S-LeftDrag> <RightDrag> ---- :map <S-LeftRelease> <RightRelease> ---- :map <2-S-LeftMouse> <2-RightMouse> ---- :map <2-S-LeftDrag> <2-RightDrag> ---- :map <2-S-LeftRelease> <2-RightRelease> ---- :map <3-S-LeftMouse> <3-RightMouse> ---- :map <3-S-LeftDrag> <3-RightDrag> ---- :map <3-S-LeftRelease> <3-RightRelease> ---- :map <4-S-LeftMouse> <4-RightMouse> ---- :map <4-S-LeftDrag> <4-RightDrag> ---- :map <4-S-LeftRelease> <4-RightRelease> +--- +--- ```vim +--- map <S-LeftMouse> <RightMouse> +--- map <S-LeftDrag> <RightDrag> +--- map <S-LeftRelease> <RightRelease> +--- map <2-S-LeftMouse> <2-RightMouse> +--- map <2-S-LeftDrag> <2-RightDrag> +--- map <2-S-LeftRelease> <2-RightRelease> +--- map <3-S-LeftMouse> <3-RightMouse> +--- map <3-S-LeftDrag> <3-RightDrag> +--- map <3-S-LeftRelease> <3-RightRelease> +--- map <4-S-LeftMouse> <4-RightMouse> +--- map <4-S-LeftDrag> <4-RightDrag> +--- map <4-S-LeftRelease> <4-RightRelease> --- ``` --- --- Mouse commands requiring the CTRL modifier can be simulated by typing @@ -4358,8 +4417,9 @@ vim.go.mousemev = vim.go.mousemoveevent --- a count of 0. --- --- Example: ---- ``` ---- :set mousescroll=ver:5,hor:2 +--- +--- ```vim +--- set mousescroll=ver:5,hor:2 --- ``` --- Will make Nvim scroll 5 lines at a time when scrolling vertically, and --- scroll 2 columns at a time when scrolling horizontally. @@ -4422,8 +4482,9 @@ vim.go.mousescroll = vim.o.mousescroll --- pointer. --- --- Example: ---- ``` ---- :set mouseshape=s:udsizing,m:no +--- +--- ```vim +--- set mouseshape=s:udsizing,m:no --- ``` --- will make the mouse turn to a sizing arrow over the status lines and --- indicate no input when the hit-enter prompt is displayed (since @@ -4627,28 +4688,33 @@ vim.go.pm = vim.go.patchmode --- starting with "/", "./" or "../"). The directories in the 'path' --- option may be relative or absolute. --- - Use commas to separate directory names: ---- ``` ---- :set path=.,/usr/local/include,/usr/include +--- +--- ```vim +--- set path=.,/usr/local/include,/usr/include --- ``` --- - Spaces can also be used to separate directory names. To have a --- space in a directory name, precede it with an extra backslash, and --- escape the space: ---- ``` ---- :set path=.,/dir/with\\\ space +--- +--- ```vim +--- set path=.,/dir/with\\\ space --- ``` --- - To include a comma in a directory name precede it with an extra --- backslash: ---- ``` ---- :set path=.,/dir/with\\,comma +--- +--- ```vim +--- set path=.,/dir/with\\,comma --- ``` --- - To search relative to the directory of the current file, use: ---- ``` ---- :set path=. +--- +--- ```vim +--- set path=. --- ``` --- - To search in the current directory use an empty string between two --- commas: ---- ``` ---- :set path=,, +--- +--- ```vim +--- set path=,, --- ``` --- - A directory name may end in a ':' or '/'. --- - Environment variables are expanded `:set_env`. @@ -4657,12 +4723,14 @@ vim.go.pm = vim.go.patchmode --- - Search upwards and downwards in a directory tree using "*", "**" and --- ";". See `file-searching` for info and syntax. --- - Careful with '\' characters, type two to get one in the option: ---- ``` ---- :set path=.,c:\\include +--- +--- ```vim +--- set path=.,c:\\include --- ``` --- Or just use '/' instead: ---- ``` ---- :set path=.,c:/include +--- +--- ```vim +--- set path=.,c:/include --- ``` --- Don't forget "." or files won't even be found in the same directory as --- the file! @@ -4673,18 +4741,21 @@ vim.go.pm = vim.go.patchmode --- The use of `:set+=` and `:set-=` is preferred when adding or removing --- directories from the list. This avoids problems when a future version --- uses another default. To remove the current directory use: ---- ``` ---- :set path-= +--- +--- ```vim +--- set path-= --- ``` --- To add the current directory use: ---- ``` ---- :set path+= +--- +--- ```vim +--- set path+= --- ``` --- To use an environment variable, you probably need to replace the --- separator. Here is an example to append $INCL, in which directory --- names are separated with a semi-colon: ---- ``` ---- :let &path = &path .. "," .. substitute($INCL, ';', ',', 'g') +--- +--- ```vim +--- let &path = &path .. "," .. substitute($INCL, ';', ',', 'g') --- ``` --- Replace the ';' with a ':' or whatever separator is used. Note that --- this doesn't work when $INCL contains a comma or white space. @@ -4742,9 +4813,11 @@ vim.wo.pvw = vim.wo.previewwindow --- It is possible to override the level for individual highlights within --- the popupmenu using `highlight-blend`. For instance, to enable --- transparency but force the current selected element to be fully opaque: ---- ``` ---- :set pumblend=15 ---- :hi PmenuSel blend=0 +--- +--- ```vim +--- +--- set pumblend=15 +--- hi PmenuSel blend=0 --- ``` --- --- UI-dependent. Works best with RGB colors. 'termguicolors' @@ -5015,8 +5088,9 @@ vim.go.ru = vim.go.ruler --- The default ruler width is 17 characters. To make the ruler 15 --- characters wide, put "%15(" at the start and "%)" at the end. --- Example: ---- ``` ---- :set rulerformat=%15(%c%V\ %p%%%) +--- +--- ```vim +--- set rulerformat=%15(%c%V\ %p%%%) --- ``` --- --- @@ -5083,8 +5157,9 @@ vim.go.ruf = vim.go.rulerformat --- wildcards. --- See `:runtime`. --- Example: ---- ``` ---- :set runtimepath=~/vimruntime,/mygroup/vim,$VIMRUNTIME +--- +--- ```vim +--- set runtimepath=~/vimruntime,/mygroup/vim,$VIMRUNTIME --- ``` --- This will use the directory "~/vimruntime" first (containing your --- personal Nvim runtime files), then "/mygroup/vim", and finally @@ -5165,7 +5240,8 @@ vim.go.sj = vim.go.scrolljump --- when long lines wrap). --- After using the local value, go back the global value with one of --- these two: ---- ``` +--- +--- ```vim --- setlocal scrolloff< --- setlocal scrolloff=-1 --- ``` @@ -5394,8 +5470,9 @@ vim.go.ssop = vim.go.sessionoptions --- contents size) = 10253 bytes. --- --- Example: ---- ``` ---- :set shada='50,<1000,s100,:0,n~/nvim/shada +--- +--- ```vim +--- set shada='50,<1000,s100,:0,n~/nvim/shada --- ``` --- --- '50 Marks will be remembered for the last 50 files you @@ -5446,14 +5523,16 @@ vim.go.sdf = vim.go.shadafile --- --- If the name of the shell contains a space, you need to enclose it in --- quotes. Example with quotes: ---- ``` ---- :set shell=\"c:\program\ files\unix\sh.exe\"\ -f +--- +--- ```vim +--- set shell=\"c:\program\ files\unix\sh.exe\"\ -f --- ``` --- Note the backslash before each quote (to avoid starting a comment) and --- each space (to avoid ending the option value), so better use `:let-&` --- like this: ---- ``` ---- :let &shell='"C:\Program Files\unix\sh.exe" -f' +--- +--- ```vim +--- let &shell='"C:\Program Files\unix\sh.exe" -f' --- ``` --- Also note that the "-f" is not inside the quotes, because it is not --- part of the command name. @@ -5478,7 +5557,8 @@ vim.go.sdf = vim.go.shadafile --- unescaping, so to keep yourself sane use `:let-&` like shown above. --- *shell-powershell* --- To use PowerShell: ---- ``` +--- +--- ```vim --- let &shell = executable('pwsh') ? 'pwsh' : 'powershell' --- let &shellcmdflag = '-NoLogo -ExecutionPolicy RemoteSigned -Command [Console]::InputEncoding=[Console]::OutputEncoding=[System.Text.UTF8Encoding]::new();$PSDefaultParameterValues[''Out-File:Encoding'']=''utf8'';Remove-Alias -Force -ErrorAction SilentlyContinue tee;' --- let &shellredir = '2>&1 | %%{ "$_" } | Out-File %s; exit $LastExitCode' @@ -5603,7 +5683,8 @@ vim.go.srr = vim.go.shellredir --- any file for best results. This might change in the future. --- 'shellslash' only works when a backslash can be used as a path --- separator. To test if this is so use: ---- ``` +--- +--- ```vim --- if exists('+shellslash') --- ``` --- Also see 'completeslash'. @@ -5739,9 +5820,10 @@ vim.go.shm = vim.go.shortmess --- String to put at the start of lines that have been wrapped. Useful --- values are "> " or "+++ ": ---- ``` ---- :let &showbreak = "> " ---- :let &showbreak = '+++ ' +--- +--- ```vim +--- let &showbreak = "> " +--- let &showbreak = '+++ ' --- ``` --- Only printable single-cell characters are allowed, excluding <Tab> and --- comma (in a future version the comma might be used to separate the @@ -5752,8 +5834,9 @@ vim.go.shm = vim.go.shortmess --- "n" flag to 'cpoptions'. --- A window-local value overrules a global value. If the global value is --- set and you want no value in the current window use NONE: ---- ``` ---- :setlocal showbreak=NONE +--- +--- ```vim +--- setlocal showbreak=NONE --- ``` --- --- @@ -5885,7 +5968,8 @@ vim.go.ss = vim.go.sidescroll --- close to the beginning of the line. --- After using the local value, go back the global value with one of --- these two: ---- ``` +--- +--- ```vim --- setlocal sidescrolloff< --- setlocal sidescrolloff=-1 --- ``` @@ -5893,9 +5977,11 @@ vim.go.ss = vim.go.sidescroll --- Example: Try this together with 'sidescroll' and 'listchars' as --- in the following example to never allow the cursor to move --- onto the "extends" character: ---- ``` ---- :set nowrap sidescroll=1 listchars=extends:>,precedes:< ---- :set sidescrolloff=1 +--- +--- ```vim +--- +--- set nowrap sidescroll=1 listchars=extends:>,precedes:< +--- set sidescrolloff=1 --- ``` --- --- @@ -6076,7 +6162,8 @@ vim.bo.spf = vim.bo.spellfile --- A comma-separated list of word list names. When the 'spell' option is --- on spellchecking will be done for these languages. Example: ---- ``` +--- +--- ```vim --- set spelllang=en_us,nl,medical --- ``` --- This means US English, Dutch and medical words are recognized. Words @@ -6194,8 +6281,9 @@ vim.bo.spo = vim.bo.spelloptions --- --- Only one of "best", "double" or "fast" may be used. The others may --- appear several times in any order. Example: ---- ``` ---- :set sps=file:~/.config/nvim/sugg,best,expr:MySuggest() +--- +--- ```vim +--- set sps=file:~/.config/nvim/sugg,best,expr:MySuggest() --- ``` --- --- This option cannot be set from a `modeline` or in the `sandbox`, for @@ -6293,21 +6381,21 @@ vim.go.sol = vim.go.startofline --- --- ```vim --- " Relative number with bar separator and click handlers: ---- :set statuscolumn=%@SignCb@%s%=%T%@NumCb@%r│%T +--- set statuscolumn=%@SignCb@%s%=%T%@NumCb@%r│%T --- --- " Right aligned relative cursor line number: ---- :let &stc='%=%{v:relnum?v:relnum:v:lnum} ' +--- let &stc='%=%{v:relnum?v:relnum:v:lnum} ' --- --- " Line numbers in hexadecimal for non wrapped part of lines: ---- :let &stc='%=%{v:virtnum>0?"":printf("%x",v:lnum)} ' +--- let &stc='%=%{v:virtnum>0?"":printf("%x",v:lnum)} ' --- --- " Human readable line numbers with thousands separator: ---- :let &stc='%{substitute(v:lnum,"\\d\\zs\\ze\\' +--- let &stc='%{substitute(v:lnum,"\\d\\zs\\ze\\' --- . '%(\\d\\d\\d\\)\\+$",",","g")}' --- --- " Both relative and absolute line numbers with different --- " highlighting for odd and even relative numbers: ---- :let &stc='%#NonText#%{&nu?v:lnum:""}' . +--- let &stc='%#NonText#%{&nu?v:lnum:""}' . --- '%=%{&rnu&&(v:lnum%2)?"\ ".v:relnum:""}' . --- '%#LineNr#%{&rnu&&!(v:lnum%2)?"\ ".v:relnum:""}' --- ``` @@ -6331,8 +6419,9 @@ vim.wo.stc = vim.wo.statuscolumn --- --- When the option starts with "%!" then it is used as an expression, --- evaluated and the result is used as the option value. Example: ---- ``` ---- :set statusline=%!MyStatusLine() +--- +--- ```vim +--- set statusline=%!MyStatusLine() --- ``` --- The *g:statusline_winid* variable will be set to the `window-ID` of the --- window that the status line belongs to. @@ -6415,7 +6504,8 @@ vim.wo.stc = vim.wo.statuscolumn --- The expression can contain the "}" character, the end of --- expression is denoted by "%}". --- For example: ---- ``` +--- +--- ```vim --- func! Stl_filename() abort --- return "%t" --- endfunc @@ -6484,8 +6574,9 @@ vim.wo.stc = vim.wo.statuscolumn --- not set) and a minwid is not set for the group, the whole group will --- become empty. This will make a group like the following disappear --- completely from the statusline when none of the flags are set. ---- ``` ---- :set statusline=...%(\ [%M%R%H]%)... +--- +--- ```vim +--- set statusline=...%(\ [%M%R%H]%)... --- ``` --- Beware that an expression is evaluated each and every time the status --- line is displayed. @@ -6518,35 +6609,42 @@ vim.wo.stc = vim.wo.statuscolumn --- --- Examples: --- Emulate standard status line with 'ruler' set ---- ``` ---- :set statusline=%<%f\ %h%m%r%=%-14.(%l,%c%V%)\ %P +--- +--- ```vim +--- set statusline=%<%f\ %h%m%r%=%-14.(%l,%c%V%)\ %P --- ``` --- Similar, but add ASCII value of char under the cursor (like "ga") ---- ``` ---- :set statusline=%<%f%h%m%r%=%b\ 0x%B\ \ %l,%c%V\ %P +--- +--- ```vim +--- set statusline=%<%f%h%m%r%=%b\ 0x%B\ \ %l,%c%V\ %P --- ``` --- Display byte count and byte value, modified flag in red. ---- ``` ---- :set statusline=%<%f%=\ [%1*%M%*%n%R%H]\ %-19(%3l,%02c%03V%)%O'%02b' ---- :hi User1 term=inverse,bold cterm=inverse,bold ctermfg=red +--- +--- ```vim +--- set statusline=%<%f%=\ [%1*%M%*%n%R%H]\ %-19(%3l,%02c%03V%)%O'%02b' +--- hi User1 term=inverse,bold cterm=inverse,bold ctermfg=red --- ``` --- Display a ,GZ flag if a compressed file is loaded ---- ``` ---- :set statusline=...%r%{VarExists('b:gzflag','\ [GZ]')}%h... +--- +--- ```vim +--- set statusline=...%r%{VarExists('b:gzflag','\ [GZ]')}%h... --- ``` --- In the `:autocmd`'s: ---- ``` ---- :let b:gzflag = 1 +--- +--- ```vim +--- let b:gzflag = 1 --- ``` --- And: ---- ``` ---- :unlet b:gzflag +--- +--- ```vim +--- unlet b:gzflag --- ``` --- And define this function: ---- ``` ---- :function VarExists(var, val) ---- : if exists(a:var) | return a:val | else | return '' | endif ---- :endfunction +--- +--- ```vim +--- function VarExists(var, val) +--- if exists(a:var) | return a:val | else | return '' | endif +--- endfunction --- ``` --- --- @@ -6577,8 +6675,9 @@ vim.go.su = vim.go.suffixes --- Comma-separated list of suffixes, which are used when searching for a --- file for the "gf", "[I", etc. commands. Example: ---- ``` ---- :set suffixesadd=.java +--- +--- ```vim +--- set suffixesadd=.java --- ``` --- --- @@ -6663,26 +6762,26 @@ vim.bo.smc = vim.bo.synmaxcol --- Otherwise this option does not always reflect the current syntax (the --- b:current_syntax variable does). --- This option is most useful in a modeline, for a file which syntax is ---- not automatically recognized. Example, in an IDL file: ---- ``` +--- not automatically recognized. Example, in an IDL file: >c --- /* vim: set syntax=idl : */ --- ``` --- When a dot appears in the value then this separates two filetype ---- names. Example: ---- ``` +--- names. Example: >c --- /* vim: set syntax=c.doxygen : */ --- ``` --- This will use the "c" syntax first, then the "doxygen" syntax. --- Note that the second one must be prepared to be loaded as an addition, --- otherwise it will be skipped. More than one dot may appear. --- To switch off syntax highlighting for the current file, use: ---- ``` ---- :set syntax=OFF +--- +--- ```vim +--- set syntax=OFF --- ``` --- To switch syntax highlighting on according to the current value of the --- 'filetype' option: ---- ``` ---- :set syntax=ON +--- +--- ```vim +--- set syntax=ON --- ``` --- What actually happens when setting the 'syntax' option is that the --- Syntax autocommand event is triggered with the value as argument. @@ -7112,15 +7211,17 @@ vim.go.titleold = vim.o.titleold --- This option cannot be set in a modeline when 'modelineexpr' is off. --- --- Example: ---- ``` ---- :auto BufEnter * let &titlestring = hostname() .. "/" .. expand("%:p") ---- :set title titlestring=%<%F%=%l/%L-%P titlelen=70 +--- +--- ```vim +--- auto BufEnter * let &titlestring = hostname() .. "/" .. expand("%:p") +--- set title titlestring=%<%F%=%l/%L-%P titlelen=70 --- ``` --- The value of 'titlelen' is used to align items in the middle or right --- of the available space. --- Some people prefer to have the file name first: ---- ``` ---- :set titlestring=%t%(\ %M%)%(\ (%{expand(\"%:~:.:h\")})%)%(\ %a%) +--- +--- ```vim +--- set titlestring=%t%(\ %M%)%(\ (%{expand(\"%:~:.:h\")})%)%(\ %a%) --- ``` --- Note the use of "%{ }" and an expression to get the path of the file, --- without the file name. The "%( %)" constructs are used to add a @@ -7205,7 +7306,8 @@ vim.bo.udf = vim.bo.undofile --- Nevertheless, a single change can already use a large amount of memory. --- Set to 0 for Vi compatibility: One level of undo and "u" undoes --- itself: ---- ``` +--- +--- ```vim --- set ul=0 --- ``` --- But you can also get Vi compatibility by including the 'u' flag in @@ -7213,7 +7315,8 @@ vim.bo.udf = vim.bo.undofile --- Also see `undo-two-ways`. --- Set to -1 for no undo at all. You might want to do this only for the --- current buffer: ---- ``` +--- +--- ```vim --- setlocal ul=-1 --- ``` --- This helps when you run out of memory for a single change. @@ -7285,8 +7388,9 @@ vim.go.ut = vim.go.updatetime --- For example, when editing assembly language files where statements --- start in the 9th column and comments in the 41st, it may be useful --- to use the following: ---- ``` ---- :set varsofttabstop=8,32,8 +--- +--- ```vim +--- set varsofttabstop=8,32,8 --- ``` --- This will set soft tabstops with 8 and 8 + 32 spaces, and 8 more --- for every column thereafter. @@ -7303,8 +7407,9 @@ vim.bo.vsts = vim.bo.varsofttabstop --- A list of the number of spaces that a <Tab> in the file counts for, --- separated by commas. Each value corresponds to one tab, with the --- final value applying to all subsequent tabs. For example: ---- ``` ---- :set vartabstop=4,20,10,8 +--- +--- ```vim +--- set vartabstop=4,20,10,8 --- ``` --- This will make the first tab 4 spaces wide, the second 20 spaces, --- the third 10 spaces, and all following tabs 8 spaces. @@ -7459,8 +7564,9 @@ vim.go.warn = vim.o.warn --- [ <Left> Insert and Replace --- ] <Right> Insert and Replace --- For example: ---- ``` ---- :set ww=<,>,[,] +--- +--- ```vim +--- set ww=<,>,[,] --- ``` --- allows wrap only when cursor keys are used. --- When the movement keys are used in combination with a delete or change @@ -7489,8 +7595,9 @@ vim.go.ww = vim.go.whichwrap --- <Esc> can be used, but hitting it twice in a row will still exit --- command-line as a failsafe measure. --- Although 'wc' is a number option, you can set it to a special key: ---- ``` ---- :set wc=<Tab> +--- +--- ```vim +--- set wc=<Tab> --- ``` --- --- @@ -7505,9 +7612,10 @@ vim.go.wc = vim.go.wildchar --- keys suitable for this option by looking at `ex-edit-index`. Normally --- you'll never actually type 'wildcharm', just use it in mappings that --- automatically invoke completion mode, e.g.: ---- ``` ---- :set wcm=<C-Z> ---- :cnoremap ss so $vim/sessions/*.vim<C-Z> +--- +--- ```vim +--- set wcm=<C-Z> +--- cnoremap ss so $vim/sessions/*.vim<C-Z> --- ``` --- Then after typing :ss you can use CTRL-P & CTRL-N. --- @@ -7524,8 +7632,9 @@ vim.go.wcm = vim.go.wildcharm --- The pattern is used like with `:autocmd`, see `autocmd-pattern`. --- Also see 'suffixes'. --- Example: ---- ``` ---- :set wildignore=*.o,*.obj +--- +--- ```vim +--- set wildignore=*.o,*.obj --- ``` --- The use of `:set+=` and `:set-=` is preferred when adding or removing --- a pattern from the list. This avoids problems when a future version @@ -7581,9 +7690,10 @@ vim.go.wic = vim.go.wildignorecase --- --- If you want <Left> and <Right> to move the cursor instead of selecting --- a different match, use this: ---- ``` ---- :cnoremap <Left> <Space><BS><Left> ---- :cnoremap <Right> <Space><BS><Right> +--- +--- ```vim +--- cnoremap <Left> <Space><BS><Left> +--- cnoremap <Right> <Space><BS><Right> --- ``` --- --- `hl-WildMenu` highlights the current match. @@ -7626,24 +7736,29 @@ vim.go.wmnu = vim.go.wildmenu --- current buffer). --- --- Examples: ---- ``` ---- :set wildmode=full +--- +--- ```vim +--- set wildmode=full --- ``` --- Complete first full match, next match, etc. (the default) ---- ``` ---- :set wildmode=longest,full +--- +--- ```vim +--- set wildmode=longest,full --- ``` --- Complete longest common string, then each full match ---- ``` ---- :set wildmode=list:full +--- +--- ```vim +--- set wildmode=list:full --- ``` --- List all matches and complete each full match ---- ``` ---- :set wildmode=list,full +--- +--- ```vim +--- set wildmode=list,full --- ``` --- List all matches without completing, then each full match ---- ``` ---- :set wildmode=longest,list +--- +--- ```vim +--- set wildmode=longest,list --- ``` --- Complete longest common string, then list alternatives. --- More info here: `cmdline-completion`. @@ -7781,7 +7896,8 @@ vim.wo.wfw = vim.wo.winfixwidth --- that ":all" will create only two windows. To avoid "vim -o 1 2 3 4" --- to create only two windows, set the option after startup is done, --- using the `VimEnter` event: ---- ``` +--- +--- ```vim --- au VimEnter * set winheight=999 --- ``` --- Minimum value is 1. @@ -7811,7 +7927,8 @@ vim.go.wh = vim.go.winheight --- message area cannot be overridden. --- --- Example: show a different color for non-current windows: ---- ``` +--- +--- ```vim --- set winhighlight=Normal:MyNormal,NormalNC:MyNormalNC --- ``` --- @@ -7881,9 +7998,10 @@ vim.go.wiw = vim.go.winwidth --- The line will be broken in the middle of a word if necessary. See --- 'linebreak' to get the break at a word boundary. --- To make scrolling horizontally a bit more useful, try this: ---- ``` ---- :set sidescroll=5 ---- :set listchars+=precedes:<,extends:> +--- +--- ```vim +--- set sidescroll=5 +--- set listchars+=precedes:<,extends:> --- ``` --- See 'sidescroll', 'listchars' and `wrap-off`. --- This option can't be set from a `modeline` when the 'diff' option is |