diff options
Diffstat (limited to 'runtime')
| -rw-r--r-- | runtime/doc/luvref.txt | 394 |
1 files changed, 338 insertions, 56 deletions
diff --git a/runtime/doc/luvref.txt b/runtime/doc/luvref.txt index 2be73f0412..3cbdb53e01 100644 --- a/runtime/doc/luvref.txt +++ b/runtime/doc/luvref.txt @@ -102,6 +102,7 @@ Low-level implementation details and unexposed C functions and types are not documented here except for when they are relevant to behavior seen in the Lua module. +- |luv-constants| — Constants - |luv-error-handling| — Error handling - |luv-version-checking| — Version checking - |uv_loop_t| — Event loop @@ -131,12 +132,103 @@ module. - |luv-metrics-operations| — Metrics operations ============================================================================== +CONSTANTS *luv-constants* + +As a Lua library, luv supports and encourages the use of lowercase strings to +represent options. For example: +>lua + -- signal start with string input + uv.signal_start("sigterm", function(signame) + print(signame) -- string output: "sigterm" + end) +< +However, luv also superficially exposes libuv constants in a Lua table at +`uv.constants` where its keys are uppercase constant names and their associated +values are integers defined internally by libuv. The values from this table may +be supported as function arguments, but their use may not change the output +type. For example: +>lua + -- signal start with integer input + uv.signal_start(uv.constants.SIGTERM, function(signame) + print(signame) -- string output: "sigterm" + end) +< +The uppercase constants defined in `uv.constants` that have associated +lowercase option strings are listed below. + +Address Families ~ + +- `AF_UNIX`: "unix" +- `AF_INET`: "inet" +- `AF_INET6`: "inet6" +- `AF_IPX`: "ipx" +- `AF_NETLINK`: "netlink" +- `AF_X25`: "x25" +- `AF_AX25`: "as25" +- `AF_ATMPVC`: "atmpvc" +- `AF_APPLETALK`: "appletalk" +- `AF_PACKET`: "packet" + +Signals ~ + +- `SIGHUP`: "sighup" +- `SIGINT`: "sigint" +- `SIGQUIT`: "sigquit" +- `SIGILL`: "sigill" +- `SIGTRAP`: "sigtrap" +- `SIGABRT`: "sigabrt" +- `SIGIOT`: "sigiot" +- `SIGBUS`: "sigbus" +- `SIGFPE`: "sigfpe" +- `SIGKILL`: "sigkill" +- `SIGUSR1`: "sigusr1" +- `SIGSEGV`: "sigsegv" +- `SIGUSR2`: "sigusr2" +- `SIGPIPE`: "sigpipe" +- `SIGALRM`: "sigalrm" +- `SIGTERM`: "sigterm" +- `SIGCHLD`: "sigchld" +- `SIGSTKFLT`: "sigstkflt" +- `SIGCONT`: "sigcont" +- `SIGSTOP`: "sigstop" +- `SIGTSTP`: "sigtstp" +- `SIGBREAK`: "sigbreak" +- `SIGTTIN`: "sigttin" +- `SIGTTOU`: "sigttou" +- `SIGURG`: "sigurg" +- `SIGXCPU`: "sigxcpu" +- `SIGXFSZ`: "sigxfsz" +- `SIGVTALRM`: "sigvtalrm" +- `SIGPROF`: "sigprof" +- `SIGWINCH`: "sigwinch" +- `SIGIO`: "sigio" +- `SIGPOLL`: "sigpoll" +- `SIGLOST`: "siglost" +- `SIGPWR`: "sigpwr" +- `SIGSYS`: "sigsys" + +Socket Types ~ + +- `SOCK_STREAM`: "stream" +- `SOCK_DGRAM`: "dgram" +- `SOCK_SEQPACKET`: "seqpacket" +- `SOCK_RAW`: "raw" +- `SOCK_RDM`: "rdm" + +TTY Modes ~ + +- `TTY_MODE_NORMAL`: "normal" +- `TTY_MODE_RAW`: "raw" +- `TTY_MODE_IO`: "io" + +============================================================================== ERROR HANDLING *luv-error-handling* -In libuv, errors are negative numbered constants; however, while those errors -are exposed through `uv.errno`, the functions used to handle them are not -exposed to luv users. Instead, if an internal error is encountered, the luv -function will return to the caller an assertable `nil, err, name` tuple. +In libuv, errors are represented by negative numbered constants. While these +constants are made available in the `uv.errno` table, they are not returned by +luv funtions and the libuv functions used to handle them are not exposed. +Instead, if an internal error is encountered, the failing luv function will +return to the caller an assertable `nil, err, name` tuple: - `nil` idiomatically indicates failure - `err` is a string with the format `{name}: {message}` @@ -153,9 +245,8 @@ success, or sometimes nothing at all. These cases are documented below. `uv.errno` *uv.errno* -A table value which exposes error constants as a map, where the key is the -error name (without the `UV_` prefix) and its value is a negative number. -See Libuv's "Error constants" page for further details. +Below is a list of known error names and error strings. See Libuv's "Error +constants" page for further details. (https://docs.libuv.org/en/v1.x/errors.html#error-constants) - `E2BIG`: argument list too long. @@ -1154,8 +1245,8 @@ Unix Notes: -- Create a new signal handler local signal = uv.new_signal() -- Define a handler function - uv.signal_start(signal, "sigint", function(signal) - print("got " .. signal .. ", shutting down") + uv.signal_start(signal, "sigint", function(signame) + print("got " .. signame .. ", shutting down") os.exit(1) end) < @@ -1167,34 +1258,40 @@ uv.new_signal() *uv.new_signal()* Returns: `uv_signal_t userdata` or `fail` -uv.signal_start({signal}, {signum}, {callback}) *uv.signal_start()* +uv.signal_start({signal}, {signame}, {callback}) *uv.signal_start()* - > method form `signal:start(signum, callback)` + > method form `signal:start(signame, callback)` Parameters: - `signal`: `uv_signal_t userdata` - - `signum`: `integer` or `string` + - `signame`: `string` or `integer` - `callback`: `callable` - - `signum`: `string` + - `signame`: `string` Start the handle with the given callback, watching for the given signal. + See |luv-constants| for supported `signame` input and output + values. + Returns: `0` or `fail` *uv.signal_start_oneshot()* -uv.signal_start_oneshot({signal}, {signum}, {callback}) +uv.signal_start_oneshot({signal}, {signame}, {callback}) - > method form `signal:start_oneshot(signum, callback)` + > method form `signal:start_oneshot(signame, callback)` Parameters: - `signal`: `uv_signal_t userdata` - - `signum`: `integer` or `string` + - `signame`: `string` or `integer` - `callback`: `callable` - - `signum`: `string` + - `signame`: `string` Same functionality as |uv.signal_start()| but the signal handler is reset the moment the signal is received. + See |luv-constants| for supported `signame` input and output + values. + Returns: `0` or `fail` uv.signal_stop({signal}) *uv.signal_stop()* @@ -1349,30 +1446,36 @@ uv.spawn({path}, {options}, {on_exit}) *uv.spawn()* Returns: `uv_process_t userdata`, `integer` -uv.process_kill({process}, {signum}) *uv.process_kill()* +uv.process_kill({process}, {signame}) *uv.process_kill()* - > method form `process:kill(signum)` + > method form `process:kill(signame)` Parameters: - `process`: `uv_process_t userdata` - - `signum`: `integer` or `string` or `nil` (default: `sigterm`) + - `signame`: `string` or `integer` or `nil` (default: `sigterm`) Sends the specified signal to the given process handle. Check the documentation on |uv_signal_t| for signal support, specially on Windows. + See |luv-constants| for supported `signame` input and output + values. + Returns: `0` or `fail` -uv.kill({pid}, {signum}) *uv.kill()* +uv.kill({pid}, {signame}) *uv.kill()* Parameters: - `pid`: `integer` - - `signum`: `integer` or `string` or `nil` (default: `sigterm`) + - `signame`: `string` or `integer` or `nil` (default: `sigterm`) Sends the specified signal to the given PID. Check the documentation on |uv_signal_t| for signal support, specially on Windows. + See |luv-constants| for supported `signame` input and output + values. + Returns: `0` or `fail` uv.process_get_pid({process}) *uv.process_get_pid()* @@ -1638,12 +1741,13 @@ TCP handles are used to represent both TCP streams and servers. uv.new_tcp([{flags}]) *uv.new_tcp()* Parameters: - - `flags`: `string` or `nil` + - `flags`: `string` or `integer` or `nil` Creates and initializes a new |uv_tcp_t|. Returns the Lua - userdata wrapping it. Flags may be a family string: `"unix"`, - `"inet"`, `"inet6"`, `"ipx"`, `"netlink"`, `"x25"`, `"ax25"`, - `"atmpvc"`, `"appletalk"`, or `"packet"`. + userdata wrapping it. + + If set, `flags` must be a valid address family. See + |luv-constants| for supported address family input values. Returns: `uv_tcp_t userdata` or `fail` @@ -1744,6 +1848,8 @@ uv.tcp_getpeername({tcp}) *uv.tcp_getpeername()* Get the address of the peer connected to the handle. + See |luv-constants| for supported address `family` output values. + Returns: `table` or `fail` - `ip` : `string` - `family` : `string` @@ -1758,6 +1864,8 @@ uv.tcp_getsockname({tcp}) *uv.tcp_getsockname()* Get the current address to which the handle is bound. + See |luv-constants| for supported address `family` output values. + Returns: `table` or `fail` - `ip` : `string` - `family` : `string` @@ -1823,8 +1931,7 @@ uv.socketpair([{socktype}, [{protocol}, [{flags1}, [{flags2}]]]]) |uv.tcp_open()|, used with |uv.spawn()|, or for any other purpose. - When specified as a string, `socktype` must be one of - `"stream"`, `"dgram"`, `"raw"`, `"rdm"`, or `"seqpacket"`. + See |luv-constants| for supported `socktype` input values. When `protocol` is set to 0 or nil, it will be automatically chosen based on the socket's domain and type. When `protocol` @@ -2184,17 +2291,11 @@ uv.tty_set_mode({tty}, {mode}) *uv.tty_set_mode()* Parameters: - `tty`: `uv_tty_t userdata` - - `mode`: `integer` + - `mode`: `string` or `integer` Set the TTY using the specified terminal mode. - Parameter `mode` is a C enum with the following values: - - - 0 - UV_TTY_MODE_NORMAL: Initial/normal terminal mode - - 1 - UV_TTY_MODE_RAW: Raw input mode (On Windows, - ENABLE_WINDOW_INPUT is also enabled) - - 2 - UV_TTY_MODE_IO: Binary-safe I/O mode for IPC - (Unix-only) + See |luv-constants| for supported TTY mode input values. Returns: `0` or `fail` @@ -2265,9 +2366,7 @@ uv.new_udp([{flags}]) *uv.new_udp()* Creates and initializes a new |uv_udp_t|. Returns the Lua userdata wrapping it. The actual socket is created lazily. - When specified, `family` must be one of `"unix"`, `"inet"`, - `"inet6"`, `"ipx"`, `"netlink"`, `"x25"`, `"ax25"`, - `"atmpvc"`, `"appletalk"`, or `"packet"`. + See |luv-constants| for supported address `family` input values. When specified, `mmsgs` determines the number of messages able to be received at one time via `recvmmsg(2)` (the allocated @@ -2510,6 +2609,51 @@ uv.udp_try_send({udp}, {data}, {host}, {port}) *uv.udp_try_send()* Returns: `integer` or `fail` +uv.udp_try_send2({udp}, {messages}, {flags}) *uv.udp_try_send2()* + + > method form `udp:try_send2(messages, flags)` + + Parameters: + - `udp`: `uv_udp_t userdata` + - `messages`: `table` + - `[1, 2, 3, ..., n]` : `table` + - `data` : `buffer` + - `addr` : `table` + - `ip` : `string` + - `port` : `integer` + - `flags`: `nil` (see below) + - `port`: `integer` + + Like `uv.udp_try_send()`, but can send multiple datagrams. + Lightweight abstraction around `sendmmsg(2)`, with a + `sendmsg(2)` fallback loop for platforms that do not support + the former. The `udp` handle must be fully initialized, either + from a `uv.udp_bind` call, another call that will bind + automatically (`udp_send`, `udp_try_send`, etc), or from + `uv.udp_connect`. `messages` should be an array-like table, + where `addr` must be specified if the `udp` has not been + connected via `udp_connect`. Otherwise, `addr` must be `nil`. + + `flags` is reserved for future extension and must currently be + `nil` or `0` or `{}`. + + Returns the number of messages sent successfully. An error will only be returned + if the first datagram failed to be sent. + + Returns: `integer` or `fail` + >lua + -- If client:connect(...) was not called + local addr = { ip = "127.0.0.1", port = 1234 } + client:try_send2({ + { data = "Message 1", addr = addr }, + { data = "Message 2", addr = addr }, + }) + -- If client:connect(...) was called + client:try_send2({ + { data = "Message 1" }, + { data = "Message 2" }, + }) +< uv.udp_recv_start({udp}, {callback}) *uv.udp_recv_start()* > method form `udp:recv_start(callback)` @@ -2531,6 +2675,8 @@ uv.udp_recv_start({udp}, {callback}) *uv.udp_recv_start()* been bound with |uv.udp_bind()| it is bound to `0.0.0.0` (the "all interfaces" IPv4 address) and a random port number. + See |luv-constants| for supported address `family` output values. + Returns: `0` or `fail` uv.udp_recv_stop({udp}) *uv.udp_recv_stop()* @@ -2743,7 +2889,8 @@ uv.fs_open({path}, {flags}, {mode} [, {callback}]) *uv.fs_open()* Parameters: - `path`: `string` - `flags`: `string` or `integer` - - `mode`: `integer` + - `mode`: `integer` (octal `chmod(1)` mode, e.g. + `tonumber('644', 8)`) - `callback`: `callable` (async version) or `nil` (sync version) - `err`: `nil` or `string` @@ -2829,7 +2976,8 @@ uv.fs_mkdir({path}, {mode} [, {callback}]) *uv.fs_mkdir()* Parameters: - `path`: `string` - - `mode`: `integer` + - `mode`: `integer` (octal representation of `chmod(1)` mode, + e.g. `tonumber('755', 8)`) - `callback`: `callable` (async version) or `nil` (sync version) - `err`: `nil` or `string` @@ -3078,7 +3226,9 @@ uv.fs_access({path}, {mode} [, {callback}]) *uv.fs_access()* Parameters: - `path`: `string` - - `mode`: `integer` + - `mode`: `integer` `string` (a combination of the `'r'`, + `'w'` and `'x'` characters denoting the symbolic mode as per + `chmod(1)`) - `callback`: `callable` (async version) or `nil` (sync version) - `err`: `nil` or `string` @@ -3097,7 +3247,8 @@ uv.fs_chmod({path}, {mode} [, {callback}]) *uv.fs_chmod()* Parameters: - `path`: `string` - - `mode`: `integer` + - `mode`: `integer` (octal representation of `chmod(1)` mode, + e.g. `tonumber('644', 8)`) - `callback`: `callable` (async version) or `nil` (sync version) - `err`: `nil` or `string` @@ -3480,14 +3631,17 @@ uv.getaddrinfo({host}, {service} [, {hints} [, {callback}]]) *uv.getaddrinfo()* Equivalent to `getaddrinfo(3)`. Either `node` or `service` may be `nil` but not both. - Valid hint strings for the keys that take a string: - - `family`: `"unix"`, `"inet"`, `"inet6"`, `"ipx"`, - `"netlink"`, `"x25"`, `"ax25"`, `"atmpvc"`, `"appletalk"`, - or `"packet"` - - `socktype`: `"stream"`, `"dgram"`, `"raw"`, `"rdm"`, or - `"seqpacket"` - - `protocol`: will be looked up using the `getprotobyname(3)` - function (examples: `"ip"`, `"icmp"`, `"tcp"`, `"udp"`, etc) + See |luv-constants| for supported address `family` input and + output values. + + See |luv-constants| for supported `socktype` input and + output values. + + When `protocol` is set to `0` or `nil`, it will be + automatically chosen based on the socket's domain and type. + When `protocol` is specified as a string, it will be looked up + using the `getprotobyname(3)` function. Examples: `"ip"`, + `"icmp"`, `"tcp"`, `"udp"`, etc. Returns (sync version): `table` or `fail` - `[1, 2, 3, ..., n]` : `table` @@ -3515,9 +3669,7 @@ uv.getnameinfo({address} [, {callback}]) *uv.getnameinfo()* Equivalent to `getnameinfo(3)`. - When specified, `family` must be one of `"unix"`, `"inet"`, - `"inet6"`, `"ipx"`, `"netlink"`, `"x25"`, `"ax25"`, - `"atmpvc"`, `"appletalk"`, or `"packet"`. + See |luv-constants| for supported address `family` input values. Returns (sync version): `string, string` or `fail` @@ -3526,7 +3678,7 @@ uv.getnameinfo({address} [, {callback}]) *uv.getnameinfo()* ============================================================================== THREADING AND SYNCHRONIZATION UTILITIES *luv-threading-and-synchronization-utilities* -Libuv provides cross-platform implementations for multiple threading an +Libuv provides cross-platform implementations for multiple threading and synchronization primitives. The API largely follows the pthreads API. uv.new_thread([{options}, ] {entry}, {...}) *uv.new_thread()* @@ -3683,6 +3835,43 @@ uv.thread_join({thread}) *uv.thread_join()* Returns: `boolean` or `fail` +uv.thread_detach({thread}) *uv.thread_detach()* + + > method form `thread:detach()` + + Parameters: + - `thread`: `luv_thread_t userdata` + + Detaches a thread. Detached threads automatically release + their resources upon termination, eliminating the need for the + application to call `uv.thread_join`. + + Returns: `boolean` or `fail` + +uv.thread_setname({name}) *uv.thread_setname()* + + Parameters: + - `name`: `string` + + Sets the name of the current thread. Different platforms + define different limits on the max number of characters a + thread name can be: Linux, IBM i (16), macOS (64), Windows + (32767), and NetBSD (32), etc. The name will be truncated if + `name` is larger than the limit of the platform. + + Returns: `0` or `fail` + +uv.thread_getname({thread}) *uv.thread_getname()* + + > method form `thread:getname()` + + Parameters: + - `thread`: `luv_thread_t userdata` + + Gets the name of the thread specified by `thread`. + + Returns: `string` or `fail` + uv.sleep({msec}) *uv.sleep()* Parameters: @@ -3796,6 +3985,36 @@ uv.getrusage() *uv.getrusage()* - `nvcsw` : `integer` (voluntary context switches) - `nivcsw` : `integer` (involuntary context switches) +uv.getrusage_thread() *uv.getrusage_thread()* + Gets the resource usage measures for the calling thread. + + Note: Not supported on all platforms. May return `ENOTSUP`. + + On macOS and Windows not all fields are set (the unsupported + fields are filled with zeroes). + + Returns: `table` or `fail` + - `utime` : `table` (user CPU time used) + - `sec` : `integer` + - `usec` : `integer` + - `stime` : `table` (system CPU time used) + - `sec` : `integer` + - `usec` : `integer` + - `maxrss` : `integer` (maximum resident set size) + - `ixrss` : `integer` (integral shared memory size) + - `idrss` : `integer` (integral unshared data size) + - `isrss` : `integer` (integral unshared stack size) + - `minflt` : `integer` (page reclaims (soft page faults)) + - `majflt` : `integer` (page faults (hard page faults)) + - `nswap` : `integer` (swaps) + - `inblock` : `integer` (block input operations) + - `oublock` : `integer` (block output operations) + - `msgsnd` : `integer` (IPC messages sent) + - `msgrcv` : `integer` (IPC messages received) + - `nsignals` : `integer` (signals received) + - `nvcsw` : `integer` (voluntary context switches) + - `nivcsw` : `integer` (involuntary context switches) + uv.available_parallelism() *uv.available_parallelism()* Returns an estimate of the default amount of parallelism a @@ -3968,6 +4187,8 @@ uv.interface_addresses() *uv.interface_addresses()* information where fields are `ip`, `family`, `netmask`, `internal`, and `mac`. + See |luv-constants| for supported address `family` output values. + Returns: `table` - `[name(s)]` : `table` - `ip` : `string` @@ -4202,6 +4423,67 @@ uv.metrics_info() *uv.metrics_info()* - `events_waiting` : `integer` ============================================================================== +STRING MANIPULATION FUNCTIONS *luv-string-manipulation* + +These string utilities are needed internally for dealing with Windows, and are +exported to allow clients to work uniformly with this data when the libuv API +is not complete. + +Notes: +1. New in luv version 1.49.0. +2. See the WTF-8 spec (https://simonsapin.github.io/wtf-8/) for information + about WTF-8. +3. Luv uses Lua-style strings, which means that all inputs and return values + (UTF-8 or UTF-16 strings) do not include a NUL terminator. + +uv.utf16_length_as_wtf8({utf16}) *uv.utf16_length_as_wtf8()* + + Get the length (in bytes) of a UTF-16 (or UCS-2) string + `utf16` value after converting it to WTF-8. The endianness of + the UTF-16 (or UCS-2) string is assumed to be the same as the + native endianness of the platform. + + Parameters: + - `utf16`: `string` + + Returns: `integer` + +uv.utf16_to_wtf8({utf16}) *uv.utf16_to_wtf8()* + + Convert UTF-16 (or UCS-2) string `utf16` to UTF-8 string. The + endianness of the UTF-16 (or UCS-2) string is assumed to be + the same as the native endianness of the platform. + + Parameters: + - `utf16`: `string` + + Returns: `string` + +uv.wtf8_length_as_utf16({wtf16}) *uv.wtf8_length_as_utf16()* + + Get the length (in UTF-16 code units) of a WTF-8 `wtf8` value + after converting it to UTF-16 (or UCS-2). + + Note: The number of bytes needed for a UTF-16 (or UCS-2) + string is `<number of code units> * 2`. + + Parameters: + - `wtf8`: `string` + + Returns: `integer` + +uv.wtf8_to_utf16({wtf16}) *uv.wtf8_to_utf16()* + + Convert WTF-8 string in `wtf8` to UTF-16 (or UCS-2) string. + The endianness of the UTF-16 (or UCS-2) string is assumed to + be the same as the native endianness of the platform. + + Parameters: + - `wtf8`: `string` + + Returns: `string` + +============================================================================== CREDITS *luv-credits* This document is a reformatted version of the LUV documentation, up-to-date @@ -4211,4 +4493,4 @@ https://github.com/luvit/luv/commit/dcd1a1cad5b05634a7691402d6ca2f214fb4ae76. Based on https://github.com/nanotee/luv-vimdocs with kind permission. -vim:tw=78:ts=8:ft=help:norl: +vim:tw=78:ts=8:sw=2:et:ft=help:norl: |