1 files changed, 0 insertions, 120 deletions
diff --git a/01-system-clock/include/gpio.h b/01-system-clock/include/gpio.h
deleted file mode 100644
index a8f06e2..0000000
--- a/01-system-clock/include/gpio.h
+++ /dev/null
@@ -1,120 +0,0 @@
-#ifndef GPIO_H__
-#define GPIO_H__
-
-#include "common.h"
-
-#include <stdint.h>
-
-/*
- * Possible GPIO ports.
- */
-typedef enum {
-  GPIO_PORT_A = 0,
-  GPIO_PORT_B = 1,
-  GPIO_PORT_C = 2,
-  GPIO_PORT_D = 3
-} gpio_port_number_t;
-
-/*
- * Structure defining the layout of the layout of the GPIO registers on the
- * stm32l432 development board.
- */
-typedef struct GPIO_PORT_STR {
-  __IO uint32_t mode_r;   /* Mode register */
-  __IO uint32_t pupd_r;   /* Pull up/pull down/none register */
-  __IO uint32_t speed_r;  /* Speed register */
-  __IO uint32_t type_r;   /* Type register */
-  __IO uint32_t input_r;  /* Input data register */
-  __IO uint32_t output_r; /* Output data register */
-  __IO uint32_t bsr_r;    /* Bit set/reset register */
-  __IO uint32_t lock_r;   /* Lock register */
-  __IO uint32_t altfn_r;  /* Alternate function register */
-} PACKED gpio_port_t;
-
-/*
- * Enum defining the PINs in a GPIO port. Each port has 16 pins to use in
- * the stm32l432.
- */
-typedef enum GPIO_PIN_ENUM {
-  PIN_0 = 0,
-  PIN_1 = 1,
-  PIN_2 = 2,
-  PIN_3 = 3,
-  PIN_4 = 4,
-  PIN_5 = 5,
-  PIN_6 = 6,
-  PIN_7 = 7,
-  PIN_8 = 8,
-  PIN_9 = 9,
-  PIN_10 = 10,
-  PIN_11 = 11,
-  PIN_12 = 12,
-  PIN_13 = 13,
-  PIN_14 = 14,
-  PIN_15 = 15
-} gpio_pin_t;
-
-/*
- * Enum defining the pin modes that are possible.
- */
-typedef enum {
-  MODE_INPUT = 0,
-  MODE_OUTPUT = 1,
-  MODE_ALTERNATE = 2,
-  MODE_ANALOG = 3
-} gpio_pin_mode_t;
-
-/*
- * Enum defining the pin speeds that are possible.
- */
-typedef enum {
-  SPEED_2MHZ = 0,
-  SPEED_10MHZ = 1,
-  SPEED_50MHZ = 3,
-} speed_t;
-
-/*
- * Structure defining an OUTPUT pin. Structurally equivalent to the input pin,
- * but can be used in a slightly type-safe manner.
- */
-typedef struct {
-  __IO gpio_port_t* gpio_port;
-  gpio_pin_t pin;
-} gpio_output_pin_t;
-
-/*
- * Sets the mode on a GPIO pin.
- *
- * gpio_port: the gpio port to use.
- * pin: the pin number to set.
- * pin_mode: the mode to set the pin to.
- */
-void set_gpio_pin_mode(
-    __IO gpio_port_t* gpio_port, gpio_pin_t pin, gpio_pin_mode_t pin_mode);
-
-/*
- * Sets the given GPIO pin to be an output pin. Returns an output_pin struct
- * corresponding to
- */
-gpio_output_pin_t set_gpio_pin_output(
-    __IO gpio_port_t* gpio_port, gpio_pin_t pin);
-
-/*
- * Sets an output pin on or off.
- *
- * pin: the pin to toggle.
- * onoff: 0 for off, non-zero of on.
- */
-void set_gpio_output_pin(gpio_output_pin_t pin, bool onoff);
-
-#define pin_on(p) set_gpio_output_pin(p, 1)
-
-#define pin_off(p) set_gpio_output_pin(p, 0)
-
-/*
- * Enables a GPIO port and returns a reference to the register definition
- * of that GPIO port.
- */
-__IO gpio_port_t* enable_gpio(gpio_port_number_t number);
-
-#endif /* GPIO_H__ */