diff options
Diffstat (limited to 'include')
26 files changed, 2000 insertions, 0 deletions
diff --git a/include/arch/arm/arch.h b/include/arch/arm/arch.h new file mode 100644 index 0000000..22d0987 --- /dev/null +++ b/include/arch/arm/arch.h @@ -0,0 +1,43 @@ +#ifndef ARCH_H_ +#define ARCH_H_ + +#ifndef ARCH_STM32L4 +#define ARCH_STM32L4 +#endif + +#define CORTEX_M4 + +#define enable_all_interrupts() \ + asm volatile(" cpsie i ") + + +#define DMA1_BASE (0x40020000) +#define DMA2_BASE (0x40020400) + +#define USART1_BASE (0x40013800) +#define USART2_BASE (0x40004400) + +#define GPIOA_BASE (0x48000000) +#define GPIOB_BASE (0x48000400) +#define GPIOC_BASE (0x48000800) +#define GPIOH_BASE (0x48001C00) + +#define SRAM1_BASE (0x20000000) +#define SRAM2_BASE (0x2000C000) + +#define SYSTEM_CONFIG_BLOCK_BASE (0xE000E008) +#define NVIC_BASE (0xE000E004) +#define RCC_BASE (0x40021000) + +#define SPI1_BASE (0x40013000) +#define SPI3_BASE (0x40003C00) + +#include <stdint.h> +#ifndef DRY_RUN +_Static_assert(sizeof(void*) == sizeof(uint32_t), "Pointers must be 32 bits"); +#endif + +extern uint32_t DATA_SEGMENT_START; +extern uint32_t DATA_SEGMENT_STOP; + +#endif /* ARCH_H_ */ diff --git a/include/arch/stm32l4xxx/peripherals/apb.h b/include/arch/stm32l4xxx/peripherals/apb.h new file mode 100644 index 0000000..11fa7ab --- /dev/null +++ b/include/arch/stm32l4xxx/peripherals/apb.h @@ -0,0 +1,4 @@ +#ifndef H__APB_ +#define H__APB_ + +#endif /* H__APB_ */ diff --git a/include/arch/stm32l4xxx/peripherals/clock.h b/include/arch/stm32l4xxx/peripherals/clock.h new file mode 100644 index 0000000..6f628fd --- /dev/null +++ b/include/arch/stm32l4xxx/peripherals/clock.h @@ -0,0 +1,128 @@ +#ifndef CORE_CLOCK_H__ +#define CORE_CLOCK_H__ + +#include <stdint.h> +#include "arch/stm32l4xxx/peripherals/rcc.h" + +#define PERIPH_BASE ((uint32_t)0x40000000) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000) +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00003C00) +#define PWR_BASE (PERIPH_BASE + 0x7000) +#define PWR_CSR_VOSF ((uint16_t)0x0010) /*!< Voltage Scaling select flag */ + +#ifndef __IO +#define __IO volatile +#endif + +typedef struct { + __IO uint32_t cr; + __IO uint32_t csr; +} pwr_t; + +// typedef struct { +// __IO uint32_t acr; +// __IO uint32_t pecr; +// __IO uint32_t pdkeyr; +// __IO uint32_t pekeyr; +// __IO uint32_t prgkeyr; +// __IO uint32_t optkeyr; +// __IO uint32_t sr; +// __IO uint32_t obr; +// __IO uint32_t wrpr; +// } flash_t; + +// #define FLASH (*(flash_t*) (FLASH_R_BASE)) +#define PWR (*(pwr_t*)(PWR_BASE)) + +/* Valid values for the PLLR/PLLQ bits of the PLLCFG register. */ +typedef enum { + PLL_DIVISOR_2 = 1, + PLL_DIVISOR_4 = 3, + PLL_DIVISOR_6 = 5, + PLL_DIVISOR_8 = 7, + PLL_DIVISOR_OFF = 0, +} pll_divisor_t; + +/* Valid values for the PLLP bits off the PLLCFG register. */ +typedef enum { + PLLP_DIVISOR_7 = 1, + PLLP_DIVISOR_17 = 3, + PLLP_DIVISOR_OFF = 0, +} pllp_divisor_t; + +/* Valid values for the PLLM bits of the PLLCFG register. */ +typedef enum { + PLLM_DIVISOR_1 = 0, + PLLM_DIVISOR_2 = 1, + PLLM_DIVISOR_3 = 2, + PLLM_DIVISOR_4 = 3, + PLLM_DIVISOR_5 = 4, + PLLM_DIVISOR_6 = 5, + PLLM_DIVISOR_7 = 6, + PLLM_DIVISOR_8 = 7, +} pllm_divisor_t; + +/* Possible sources for the input clock. */ +typedef enum { + PLL_SRC_NONE = 0, + PLL_SRC_MSI = 1, + PLL_SRC_HSI = 2, + PLL_SRC_HSE = 3, +} pll_src_t; + +/* Valid sources for the system clock. */ +typedef enum { + SYSTEM_CLOCK_SRC_MSI = 0, + SYSTEM_CLOCK_SRC_HSI = 1, + SYSTEM_CLOCK_SRC_HSE = 2, + SYSTEM_CLOCK_SRC_PLL = 3, +} system_clock_src_t; + +#define E_BADPLLN (-2) +#define E_BADPLLP_DIV (-1) +#define E_TIMEOUT (-3) +#define E_NOT_OFF (-4) +#define E_BAD_ARG (-5) + +#define enable_hsi(rcc, enabled) do { \ + if (enabled) { \ + (rcc)->c_r |= BIT(8); \ + } else { \ + (rcc)->c_r &= ~BIT(8); \ + } \ +} while(0) + +/* + * Sets the system clock to a full 80Mhz. + */ +int set_system_clock_MHz(uint8_t mhz); + +/* + * Set the PLL on. + */ +int pll_on(); + +/* + * Set the PLL off. + */ +int pll_off(); + +/* + * Sets the source of the system clock. + */ +int set_system_clock_src(system_clock_src_t src); + +/* + * Configure the PLL. + */ +int configure_pll( + uint8_t pllp_div_factor, pll_divisor_t pllr, /* System clock divisor. */ + pll_divisor_t pllq, /* Divison factor for PLL48M1CLK. */ + pllp_divisor_t pllp, /* Divison factor for PLLSAI2CLK. */ + uint8_t plln, /* PLL numerator. */ + pllm_divisor_t pllm, /* PLL denominator. */ + pll_src_t pllsrc /* PLL source */); + +uint8_t get_clock_mhz(); + +#endif /* CORE_CLOCK_H__ */ diff --git a/include/arch/stm32l4xxx/peripherals/dma.h b/include/arch/stm32l4xxx/peripherals/dma.h new file mode 100644 index 0000000..f62a92b --- /dev/null +++ b/include/arch/stm32l4xxx/peripherals/dma.h @@ -0,0 +1,149 @@ +#ifndef CORE_DMA_H_ +#define CORE_DMA_H_ + +/* + * Header file for definining the DMA (Direct Memory Access). + * + * A DMA is used to perform data transfers between segments of memory + * or between memory and peripherals. + * + * There are 2 DMA's on the chip. Each with 7 channels. + */ + +#include "kern/common.h" +#include <arch.h> +#include <stdint.h> + +#define DMA1 (* (dma_t*) DMA1_BASE) +#define DMA2 (* (dma_t*) DMA2_BASE) + +typedef enum { + DMA_SIZE_8_BITS = 0, + DMA_SIZE_16_BITS = 1, + DMA_SIZE_32_BITS = 2, +} dma_size_t; + +typedef enum { + DMA_PRIORITY_LEVEL_LOW = 0, + DMA_PRIORITY_LEVEL_MEDIUM = 1, + DMA_PRIORITY_LEVEL_HIGH = 2, + DMA_PRIORITY_LEVEL_VERY_HIGH = 3 +} dma_priority_level_t; + +typedef enum { + READ_FROM_PERIPHERAL = 0, + READ_FROM_MEMORY = 1, +} dma_dir_t; + +typedef struct { + +#define dma_cc_en (1 << 0) // channel enable +#define dma_cc_tcie (1 << 1) // transfer complete interrupt enable +#define dma_cc_htie (1 << 2) // half transfer interrupt enable +#define dma_cc_teie (1 << 3) // transfer error interrupt enable +#define dma_cc_dir (1 << 4) // data transfer direction +#define dma_cc_circ (1 << 5) // circular mode +#define dma_cc_pinc (1 << 6) // peripheral increment mode +#define dma_cc_minc (1 << 7) // memory increment mode +#define dma_cc_psize (3 << 8) // Peripheral size +#define dma_cc_msize (3 << 10) // Memory size +#define dma_cc_pl (3 << 12) // Priority level +#define dma_cc_mem2mem (1 << 14) // Memory to memory mode + + __IO uint32_t cc_r; + + /* Number of data to transfer. Can only store a short. */ + __IO uint32_t cndt_r; + + /* DMA channel peripheral address register. + * Defines a memory address if mem2mem is set. */ + __IO uint32_t cpa_r; + + /* DMA channel memory address register. + * Defines another perpipheral address if peripheral-periphal mode is set. */ + __IO uint32_t cma_r; + + __IO uint32_t reserved; +} dma_channel_config_t; + +typedef struct { + // DMA Interrupt status register. +#define dma_gif1 (1 << 0) // global interrupt flag for channel 1 +#define dma_tcif1 (1 << 1) // transfer complete (TC) flag for channel 1 +#define dma_htif1 (1 << 2) // half transfer (HT) flag for channel 1 +#define dma_teif1 (1 << 3) // transfer error (TE) flag for channel 1 +#define dma_gif2 (1 << 4) // global interrupt flag for channel 2 +#define dma_tcif2 (1 << 5) // transfer complete (TC) flag for channel 2 +#define dma_htif2 (1 << 6) // half transfer (HT) flag for channel 2 +#define dma_teif2 (1 << 7) // transfer error (TE) flag for channel 2 +#define dma_gif3 (1 << 8) // global interrupt flag for channel 3 +#define dma_tcif3 (1 << 9) // transfer complete (TC) flag for channel 3 +#define dma_htif3 (1 << 10) // half transfer (HT) flag for channel 3 +#define dma_teif3 (1 << 11) // transfer error (TE) flag for channel 3 +#define dma_gif4 (1 << 12) // global interrupt flag for channel 4 +#define dma_tcif4 (1 << 13) // transfer complete (TC) flag for channel 4 +#define dma_htif4 (1 << 14) // half transfer (HT) flag for channel 4 +#define dma_teif4 (1 << 15) // transfer error (TE) flag for channel 4 +#define dma_gif5 (1 << 16) // global interrupt flag for channel 5 +#define dma_tcif5 (1 << 17) // transfer complete (TC) flag for channel 5 +#define dma_htif5 (1 << 18) // half transfer (HT) flag for channel 5 +#define dma_teif5 (1 << 19) // transfer error (TE) flag for channel 5 +#define dma_gif6 (1 << 20) // global interrupt flag for channel 6 +#define dma_tcif6 (1 << 21) // transfer complete (TC) flag for channel 6 +#define dma_htif6 (1 << 22) // half transfer (HT) flag for channel 6 +#define dma_teif6 (1 << 23) // transfer error (TE) flag for channel 6 +#define dma_gif7 (1 << 24) // global interrupt flag for channel 7 +#define dma_tcif7 (1 << 25) // transfer complete (TC) flag for channel 7 +#define dma_htif7 (1 << 26) // half transfer (HT) flag for channel 7 +#define dma_teif7 (1 << 27) // transfer error (TE) flag for channel 7 + __IO uint32_t is_r; + + // DMA Interrupt flag clear register +#define dma_cgif1 (1 << 0) // global interrupt flag clear for channel 1 +#define dma_ctcif1 (1 << 1) // transfer complete flag clear for channel 1 +#define dma_chtif1 (1 << 2) // half transfer flag clear for channel 1 +#define dma_cteif1 (1 << 3) // transfer error flag clear for channel 1 +#define dma_cgif2 (1 << 4) // global interrupt flag clear for channel 2 +#define dma_ctcif2 (1 << 5) // transfer complete flag clear for channel 2 +#define dma_chtif2 (1 << 6) // half transfer flag clear for channel 2 +#define dma_cteif2 (1 << 7) // transfer error flag clear for channel 2 +#define dma_cgif3 (1 << 8) // global interrupt flag clear for channel 3 +#define dma_ctcif3 (1 << 9) // transfer complete flag clear for channel 3 +#define dma_chtif3 (1 << 10) // half transfer flag clear for channel 3 +#define dma_cteif3 (1 << 11) // transfer error flag clear for channel 3 +#define dma_cgif4 (1 << 12) // global interrupt flag clear for channel 4 +#define dma_ctcif4 (1 << 13) // transfer complete flag clear for channel 4 +#define dma_chtif4 (1 << 14) // half transfer flag clear for channel 4 +#define dma_cteif4 (1 << 15) // transfer error flag clear for channel 4 +#define dma_cgif5 (1 << 16) // global interrupt flag clear for channel 5 +#define dma_ctcif5 (1 << 17) // transfer complete flag clear for channel 5 +#define dma_chtif5 (1 << 18) // half transfer flag clear for channel 5 +#define dma_cteif5 (1 << 19) // transfer error flag clear for channel 5 +#define dma_cgif6 (1 << 20) // global interrupt flag clear for channel 6 +#define dma_ctcif6 (1 << 21) // transfer complete flag clear for channel 6 +#define dma_chtif6 (1 << 22) // half transfer flag clear for channel 6 +#define dma_cteif6 (1 << 23) // transfer error flag clear for channel 6 +#define dma_cgif7 (1 << 24) // global interrupt flag clear for channel 7 +#define dma_ctcif7 (1 << 25) // transfer complete flag clear for channel 7 +#define dma_chtif7 (1 << 26) // half transfer flag clear for channel 7 +#define dma_cteif7 (1 << 27) // transfer error flag clear for channel 7 + __IO uint32_t ifc_r; + + dma_channel_config_t channel_config[7]; + + __IO uint32_t reserved[5]; + + /* DMA channel selection register. */ +#define dma_c1s (0xF << 0) // DMA channel 1 selection. +#define dma_c2s (0xF << 4) // DMA channel 2 selection. +#define dma_c3s (0xF << 8) // DMA channel 3 selection. +#define dma_c4s (0xF << 12) // DMA channel 4 selection. +#define dma_c5s (0xF << 16) // DMA channel 5 selection. +#define dma_c6s (0xF << 20) // DMA channel 6 selection. +#define dma_c7s (0xF << 24) // DMA channel 7 selection. + __IO uint32_t csel_r; +} dma_t; + +static_assert(offsetof(dma_t, csel_r) == 0xA8, "Offset check failed."); + +#endif /* CORE_DMA_H_ */ diff --git a/include/arch/stm32l4xxx/peripherals/flash.h b/include/arch/stm32l4xxx/peripherals/flash.h new file mode 100644 index 0000000..28a3d6c --- /dev/null +++ b/include/arch/stm32l4xxx/peripherals/flash.h @@ -0,0 +1,20 @@ +#ifndef H__FLASH_ +#define H__FLASH_ + +#include "kern/common.h" + +/* + * Header file for dealing with flash. + */ + +#define FLASH_BASE 0x40022000 + +typedef struct { + __IO uint32_t ac_r; /* Flash access control register. */ + + /* TODO fill out the rest. */ +} PACKED flash_t; + +#define FLASH (*(__IO flash_t*)FLASH_BASE) + +#endif /* H__FLASH_ */ diff --git a/include/arch/stm32l4xxx/peripherals/gpio.h b/include/arch/stm32l4xxx/peripherals/gpio.h new file mode 100644 index 0000000..944d725 --- /dev/null +++ b/include/arch/stm32l4xxx/peripherals/gpio.h @@ -0,0 +1,66 @@ +#ifndef CORE_GPIO_H__ +#define CORE_GPIO_H__ + +#include "kern/common.h" +#include "arch/stm32l4xxx/peripherals/rcc.h" + +#include <stdint.h> + +/* + * Structure defining the layout of the layout of the GPIO registers on the + * stm32l432 development board. + */ +typedef struct GPIO_PORT_STR { + /* Mode of each GPIO pin for this GPIO port. */ +#define gpio_mode_n(off) (3 << ((off) * 2)) + __IO uint32_t mode_r; /* Mode register */ + + /* Output type for each gpio pin in this port. */ +#define gpio_otype_n(off) (1 << (off)) + __IO uint32_t otype_r; + + /* GPIO port output speed. */ +#define gpio_ospeed_n(off) (3 << ((off) * 2)) + __IO uint32_t ospeed_r; + + /* GPIO port pull-up/pull-down register */ +#define gpio_pupd_n(off) (3 << ((off) * 2)) + __IO uint32_t pupd_r; + + /* GPIO port input data register. */ +#define gpio_idr_n(off) (1 << (off)) + __IO uint32_t id_r; + + /* GPIO port output data register. */ +#define gpio_odr_n(off) (1 << (off)) + __IO uint32_t od_r; + + /* GPIO port bit set/reset register. */ +#define gpio_bs_n(off) (1 << (off)) +#define gpio_br_n(off) (1 << (off)) + __IO uint32_t bsr_r; + + /* GPIO port configuration lock register. */ +#define gpio_lck_n(off) (1 << (off)) +#define gpio_lckk (1 << 16) + __IO uint32_t lck_r; + + /* Alternate function low-register. */ +#define gpio_afsel_n(off) (0xf << ((off) * 4)) + __IO uint32_t af_rl; + /* Alternate function high-register. */ + __IO uint32_t af_rh; + + /* GPIO port bit register. */ +#define gpio_br_n(off) (1 << (off)) + __IO uint32_t br_r; + + /* Analog switch control register. */ +#define gpio_asc_n(off) (1 << (off)) + __IO uint32_t asc_r; +} PACKED gpio_port_config_t; + +static_assert( + offsetof(gpio_port_config_t, asc_r) == 0x2C, "Offset check failed"); + +#endif diff --git a/include/arch/stm32l4xxx/peripherals/irq.h b/include/arch/stm32l4xxx/peripherals/irq.h new file mode 100644 index 0000000..52878ca --- /dev/null +++ b/include/arch/stm32l4xxx/peripherals/irq.h @@ -0,0 +1,89 @@ +#ifndef CORE_IRQ_H__ +#define CORE_IRQ_H__ + +#include <stdint.h> + +/* + * Include file for interrupt service routines. + */ + +typedef enum { +#define IRQ_RESERVED(n) +#define IRQ(name_, uname, num) \ + IRQ_##uname = num, +#include "arch/stm32l4xxx/peripherals//isrs.inc" +#undef IRQ +#undef IRQ_RESERVED +} interrupt_t; + +/* Defines a set of interrupts so they may be enabled all at once. */ +typedef struct { + uint32_t sysirqs; /* System iterrupts. */ + uint32_t irqs[8]; +} interrupt_set_t; + +inline static void interrupt_set_add( + interrupt_set_t* interrupt_set, interrupt_t interrupt) +{ + if (interrupt < 16) { + interrupt_set->sysirqs |= 1 << interrupt; + return; + } + + interrupt -= 16; + int loc = interrupt / 32; + int off = interrupt % 32; + + interrupt_set->irqs[loc] |= 1 << off; +} + +inline static void interrupt_set_remove( + interrupt_set_t* interrupt_set, interrupt_t interrupt) +{ + if (interrupt < 16) { + interrupt_set->sysirqs &= ~(1 << interrupt); + return; + } + + interrupt -= 16; + int loc = interrupt / 32; + int off = interrupt % 32; + + interrupt_set->irqs[loc] &= ~(1 << off); +} + +/* + * The interrupt service routines. These link in the function `main` as the + * main function. + */ +extern const void* vectors[]; + +/* + * Defines an error state. This loops forever and defines a distinct flashing + * pattern to let the user know an unhandled ISR happened. + */ +void unhandled_isr(uint8_t val); + +#define enable_interrupt(val) \ + {interrupt_set_t itrset = { 0 }; \ + interrupt_set_add(&itrset, val); \ + enable_interrupts(&itrset);} + +#define disable_interrupt(val) \ + {interrupt_set_t itrset = { 0 }; \ + interrupt_set_add(&itrset, val); \ + disable_interrupts(&itrset);} + +/* + * Enables the provided interrupt. Note that if the interrupt is one of the + * system interrupts (first 16) this function has no effect because those + * interrupts are always enabled. + */ +void enable_interrupts(interrupt_set_t* interrupts); + +/* + * Enables the provided interrupt + */ +void disable_interrupts(interrupt_set_t* interrupts); + +#endif /* CORE_IRQ_H_ */ diff --git a/include/arch/stm32l4xxx/peripherals/isrs.inc b/include/arch/stm32l4xxx/peripherals/isrs.inc new file mode 100644 index 0000000..0682238 --- /dev/null +++ b/include/arch/stm32l4xxx/peripherals/isrs.inc @@ -0,0 +1,112 @@ +/* + * The following is a list of interrupts listed in a way + * that makes it easy to macro-process them by defining + * macro definitions for IRQ and IRQ_RESERVED alike followed + * by including this file. + */ +IRQ(on_reset, RESET, 1) +IRQ(on_nmi, NMI, 2) +IRQ(on_hard_fault, HARD_FAULT, 3) +IRQ(on_mem_manage, MEM_MANAGE, 4) +IRQ(on_bus_fault, BUS_FAULT, 5) +IRQ(on_usage_fault, USAGE_FAULT, 6) +IRQ_RESERVED(7) +IRQ_RESERVED(8) +IRQ_RESERVED(9) +IRQ_RESERVED(10) +IRQ(on_svc, SVC, 11) +IRQ(on_debug_mon, DEBUG_MON, 12) +IRQ_RESERVED(13) +IRQ(on_pendsv, PENDSV, 14) +IRQ(on_systick, SYSTICK, 15) +IRQ(on_wwdg_irq, WWDG_IRQ, 16) +IRQ(on_pvd_irq, PVD_IRQ, 17) +IRQ(on_tamper_stamp_irq, TAMPER_STAMP_IRQ, 18) +IRQ(on_rtc_wkup_irq, RTC_WKUP_IRQ, 19) +IRQ(on_flash_irq, FLASH_IRQ, 20) +IRQ(on_rcc_irq, RCC_IRQ, 21) +IRQ(on_exti0_irq, EXTI0_IRQ, 22) +IRQ(on_exti1_irq, EXTI1_IRQ, 23) +IRQ(on_exti2_irq, EXTI2_IRQ, 24) +IRQ(on_exti3_irq, EXTI3_IRQ, 25) +IRQ(on_exti4_irq, EXTI4_IRQ, 26) +IRQ(on_dma1_channel1_irq, DMA1_CHANNEL1_IRQ, 27) +IRQ(on_dma1_channel2_irq, DMA1_CHANNEL2_IRQ, 28) +IRQ(on_dma1_channel3_irq, DMA1_CHANNEL3_IRQ, 29) +IRQ(on_dma1_channel4_irq, DMA1_CHANNEL4_IRQ, 30) +IRQ(on_dma1_channel5_irq, DMA1_CHANNEL5_IRQ, 31) +IRQ(on_dma1_channel6_irq, DMA1_CHANNEL6_IRQ, 32) +IRQ(on_dma1_channel7_irq, DMA1_CHANNEL7_IRQ, 33) +IRQ(on_adc1_irq, ADC1_IRQ, 34) +IRQ(on_can1_tx, CAN1_TX, 35) +IRQ(on_can1_rx0, CAN1_RX0, 36) +IRQ(on_can1_rx1, CAN1_RX1, 37) +IRQ(on_can1_sce, CAN1_SCE, 38) +IRQ(on_exti9_5, EXTI9_5, 39) +IRQ(on_tim1_brk, TIM1_BRK, 40) +IRQ(on_tim1_up, TIM1_UP, 41) +IRQ(on_tim1_trg_com, TIM1_TRG_COM, 42) +IRQ(on_tim1_cc, TIM1_CC, 43) +IRQ(on_tim2, TIM2, 44) +IRQ(on_tim3, TIM3, 45) +IRQ(on_tim4, TIM4, 46) +IRQ(on_i2c1_ev, I2C1_EV, 47) +IRQ(on_i2c1_er, I2C1_ER, 48) +IRQ(on_i2c2_ev, I2C2_EV, 49) +IRQ(on_i2c2_er, I2C2_ER, 50) +IRQ(on_spi1, SPI1, 51) +IRQ(on_spi2, SPI2, 52) +IRQ(on_usart1, USART1, 53) +IRQ(on_usart2, USART2, 54) +IRQ(on_usart3, USART3, 55) +IRQ(on_exti15_10, EXTI15_10, 56) +IRQ(on_rtc_alarm, RTC_ALARM, 57) +IRQ(on_dfsdm1_flt3, DFSDM1_FLT3, 58) +IRQ(on_tim8_brk, TIM8_BRK, 59) +IRQ(on_tim8_up, TIM8_UP, 60) +IRQ(on_tim8_trg_com, TIM8_TRG_COM, 61) +IRQ(on_tim8_cc, TIM8_CC, 62) +IRQ(on_adc3, ADC3, 63) +IRQ(on_fmc, FMC, 64) +IRQ(on_sdmmc1, SDMMC1, 65) +IRQ(on_tim5, TIM5, 66) +IRQ(on_spi3, SPI3, 67) +IRQ(on_uart4, UART4, 68) +IRQ(on_uart5, UART5, 69) +IRQ(on_tim6_dacunder, TIM6_DACUNDER, 70) +IRQ(on_tim7, TIM7, 71) +IRQ(on_dma2_channel1, DMA2_CHANNEL1_IRQ, 72) +IRQ(on_dma2_channel2, DMA2_CHANNEL2_IRQ, 73) +IRQ(on_dma2_channel3, DMA2_CHANNEL3_IRQ, 74) +IRQ(on_dma2_channel4, DMA2_CHANNEL4_IRQ, 75) +IRQ(on_dma2_channel5, DMA2_CHANNEL5_IRQ, 76) +IRQ(on_dfsdm1_flt0, DFSDM1_FLT0, 77) +IRQ(on_dfsdm1_flt1, DFSDM1_FLT1, 78) +IRQ(on_dfsdm1_flt2, DFSDM1_FLT2, 79) +IRQ(on_comp, COMP, 80) +IRQ(on_lptim1, LPTIM1, 81) +IRQ(on_lptim2, LPTIM2, 82) +IRQ(on_otg_fs, OTG_FS, 83) +IRQ(on_dma2_channel6, DMA2_CHANNEL6, 84) +IRQ(on_dma2_channel7, DMA2_CHANNEL7, 85) +IRQ(on_lpuart1, LPUART1, 86) +IRQ(on_quadspi, QUADSPI, 87) +IRQ(on_i2c3_ev, I2C3_EV, 88) +IRQ(on_i2c3_er, I2C3_ER, 89) +IRQ(on_sai1, SAI1, 90) +IRQ(on_sai2, SAI2, 91) +IRQ(on_swpmi1, SWPMI1, 92) +IRQ(on_tsc, TSC, 93) +IRQ(on_lcd, LCD, 94) +IRQ(on_aes, AES, 95) +IRQ(on_rng, RNG, 96) +IRQ(on_fpu, FPU, 97) +IRQ(on_hash, HASH, 98) +IRQ(on_i2c4_ev, I2C4_EV, 99) +IRQ(on_i2c4_er, I2C4_ER, 100) +IRQ(on_dcmi, DCMI, 101) +IRQ(on_can2_tx, CAN2_TX, 102) +IRQ(on_can2_rx0, CAN2_RX0, 103) +IRQ(on_can2_rx1, CAN2_RX1, 104) +IRQ(on_can2_sce, CAN2_SCE, 105) +IRQ(on_dma2d, DMA2D, 106) diff --git a/include/arch/stm32l4xxx/peripherals/nvic.h b/include/arch/stm32l4xxx/peripherals/nvic.h new file mode 100644 index 0000000..1645a2d --- /dev/null +++ b/include/arch/stm32l4xxx/peripherals/nvic.h @@ -0,0 +1,46 @@ +#ifndef NVIC_H_ +#define NVIC_H_ + +#include "arch.h" +#include "kern/common.h" + +typedef __IO struct { +#define nvic_intlinesnum (0x0F << 0) + uint32_t ict_r; /* Interrupt control type register. */ + + uint8_t reserved0[0xF8]; + + uint32_t ise_r[8]; + + uint8_t reserved1[0x60]; + + uint32_t ice_r[8]; + + uint8_t reserved2[0x60]; + + uint32_t isp_r[8]; + + uint8_t reserved3[0x60]; + + uint32_t icp_r[8]; + + uint8_t reserved4[0x60]; + + uint32_t iab_r[8]; + + uint8_t reserved5[0xE0]; + + uint32_t ip_r[60]; +} nvic_t; + +static_assert(offsetof(nvic_t, ise_r) == 0x00FC, "Offset check failed"); +static_assert(offsetof(nvic_t, ice_r) == 0x017C, "Offset check failed"); +static_assert(offsetof(nvic_t, isp_r) == 0x01FC, "Offset check failed"); +static_assert(offsetof(nvic_t, icp_r) == 0x027C, "Offset check failed"); +static_assert(offsetof(nvic_t, iab_r) == 0x02FC, "Offset check failed"); +static_assert(offsetof(nvic_t, ip_r) == 0x03FC, "Offset check failed"); + +#define NVIC (* (nvic_t*) NVIC_BASE) + + +#endif /* NVIC_H_ */ diff --git a/include/arch/stm32l4xxx/peripherals/rcc.h b/include/arch/stm32l4xxx/peripherals/rcc.h new file mode 100644 index 0000000..de7b568 --- /dev/null +++ b/include/arch/stm32l4xxx/peripherals/rcc.h @@ -0,0 +1,132 @@ +#ifndef H__RCC_ +#define H__RCC_ + +#include "arch.h" +#include "kern/common.h" +#include <stdint.h> + +typedef struct { + __IO uint32_t c_r; /* Clock control register. 0x00 */ + __IO uint32_t icsc_r; /* Internal clock srcs calibration register. 0x04 */ + __IO uint32_t cfg_r; /* clock confguration register. 0x08 */ + __IO uint32_t pllcfg_r; /* PLL Configuration register. 0x0c */ + __IO uint32_t pllsai1cfg_r; /* PLLSAI1 configuration register. 0x10 */ + + __IO uint32_t reserved_1; /* Not used. offset 0x14. */ + + __IO uint32_t cie_r; /* Clock interrupt enable register. 0x18 */ + __IO uint32_t cif_r; /* Clock interrupt flag regiseter. 0x1c */ + __IO uint32_t cic_r; /* Clock interrupt clear register. 0x20 */ + + __IO uint32_t reserved_2; /* Not used. offset 0x24. */ + + __IO uint32_t ahb1rst_r; /* AHB Peripheral 1 reset register. 0x28 */ + __IO uint32_t ahb2rst_r; /* AHB Peripheral 2 reset register. 0x2c */ + __IO uint32_t ahb3rst_r; /* AHB Peripheral 3 reset register. 0x30 */ + + __IO uint32_t reserved_3; /* Not used. offset 0x34. */ + +#define rcc_lptim1rst (1 << 31) // Low Power Timer 1 reset +#define rcc_opamprst (1 << 30) // OPAMP interface reset +#define rcc_dac1rst (1 << 29) // DAC1 interface reset +#define rcc_pwrrst (1 << 28) // Power interface reset +#define rcc_can2rst (1 << 26) // CAN2 reset (this bit is reserved for STM32L47x/L48x devices) +#define rcc_can1rst (1 << 25) // CAN1 reset +#define rcc_crsrst (1 << 24) // CRS reset (this bit is reserved for STM32L47x/L48x devices) +#define rcc_i2c3rst (1 << 23) // I2C3 reset +#define rcc_i2c2rst (1 << 22) // I2C2 reset +#define rcc_i2c1rst (1 << 21) // I2C1 reset +#define rcc_uart5rst (1 << 20) // UART5 reset +#define rcc_uart4rst (1 << 19) // UART4 reset +#define rcc_usart3rst (1 << 18) // USART3 reset +#define rcc_usart2rst (1 << 17) // USART2 reset +#define rcc_reserved (1 << 16) // must be kept at reset value. +#define rcc_spi3rst (1 << 15) // SPI3 reset +#define rcc_spi2rst (1 << 14) // SPI2 reset +#define rcc_lcdrst (1 << 9) // interface reset (this bit is reserved for STM32L471/L4x5 devices) +#define rcc_tim7rst (1 << 5) // timer reset +#define rcc_tim6rst (1 << 4) // timer reset +#define rcc_tim5rst (1 << 3) // timer reset +#define rcc_tim4rst (1 << 2) // timer reset +#define rcc_tim3rst (1 << 1) // timer reset +#define rcc_tim2rst (1 << 0) // timer reset + __IO uint32_t apb1rst1_r; /* APB Peripheral reset register 1. 0x38 */ + __IO uint32_t apb1rst2_r; /* APB Peripheral reset register 2. 0x3C */ + __IO uint32_t apb2rst_r; /* APB Peripheral reset register. 0x40 */ + + __IO uint32_t reserved_4; /* Not used. offset 0x44. */ + +#define rcc_dma1en (1 << 0) /* DMA1 clock enable. */ +#define rcc_dma2en (1 << 1) /* DMA2 clock enable. */ +#define rcc_flashen (1 << 8) /* Flash memory interface clock enable. */ +#define rcc_crcen (1 << 12) /* CRC clock enable. */ +#define rcc_tscen (1 << 16) /* Touch sensing controller clock enable. */ +#define rcc_dmad2en (1 << 17) /* DMA2D clock enabled. */ + __IO uint32_t ahb1en_r; /* AHB1 Peripheral enable register. 0x48 */ + +#define rcc_gpioen(port) (1 << (port)) +#define rcc_otgfsen (1 << 12) +#define rcc_adcen (1 << 13) +#define rcc_dcmien (1 << 14) +#define rcc_assen (1 << 16) +#define rcc_hashen (1 << 17) +#define rcc_rngen (1 << 18) + __IO uint32_t ahb2en_r; /* AHB2 Peripheral enable register. 0x4C */ + __IO uint32_t ahb3en_r; /* AHB3 Peripheral enable register. 0x50 */ + + __IO uint32_t reserved_5; /* Not used. offset 0x54. */ + + __IO uint32_t apb1en1_r; /* APB1 Peripheral enable register 1. 0x58 */ + __IO uint32_t apb1en2_r; /* APB1 Peripheral enable register 2. 0x5C */ + __IO uint32_t apb2en_r; /* APB2 Peripheral enable register. 0x60 */ + + __IO uint32_t reserved_6; /* Not used. offset 0x64. */ + + __IO uint32_t ahb1smen_r; /* 0x68 */ + __IO uint32_t ahb2smen_r; /* 0x6c */ + __IO uint32_t ahb3smen_r; /* 0x70 */ + + __IO uint32_t reserved_7; + + __IO uint32_t apb1smen_r1; /* 0x78 */ + __IO uint32_t apb1smen_r2; /* 0x7c */ + __IO uint32_t apb2smen_r; /* 0x80 */ + + __IO uint32_t reserved_8; + + __IO uint32_t ccip_r; /* 0x88 */ +} PACKED rcc_t; + +static_assert(offsetof(rcc_t, ccip_r) == 0x88, "Offset check failed."); + +#define RCC (*(__IO rcc_t*)RCC_BASE) + +/* Macros to operate on the RCC registers. */ + +/* Sets the HSE. rcc is the RCC to use, e is zero for off, non-zero for on. */ +#define set_hse(rcc, e) \ + do { \ + if (e) { \ + (rcc).c_r |= 1 << 16; \ + } else { \ + (rcc).c_r &= ~(1 << 16); \ + } \ + } while (0) + +/* Sets the HSI. rcc is the RCC to use, e is zero for off, non-zero for on. */ +#define set_hsi(rcc, e) \ + do { \ + if (e) { \ + (rcc).c_r |= 1 << 8; \ + } else { \ + (rcc).c_r &= ~(1 << 8); \ + } \ + } while (0) + +/* Checks to see if the hse is ready. */ +#define hse_ready(rcc) ((rcc).c_r & (1 << 17)) + +/* Checks to see if the hse is ready. */ +#define hsi_ready(rcc) ((rcc).c_r & (1 << 10)) + +#endif diff --git a/include/arch/stm32l4xxx/peripherals/spi.h b/include/arch/stm32l4xxx/peripherals/spi.h new file mode 100644 index 0000000..a39a0bb --- /dev/null +++ b/include/arch/stm32l4xxx/peripherals/spi.h @@ -0,0 +1,102 @@ +#ifndef CORE_SPI_H_ +#define CORE_SPI_H_ + +#include "kern/common.h" +#include "arch.h" + +#define SPI1 (*((spi_t*)(SPI1_BASE))) +#define SPI3 (*((spi_t*)(SPI3_BASE))) + +typedef enum { + SPI_BAUD_FPCLK_DIV_2 = 0, + SPI_BAUD_FPCLK_DIV_4 = 1, + SPI_BAUD_FPCLK_DIV_8 = 2, + SPI_BAUD_FPCLK_DIV_16 = 3, + SPI_BAUD_FPCLK_DIV_32 = 4, + SPI_BAUD_FPCLK_DIV_64 = 5, + SPI_BAUD_FPCLK_DIV_128 = 6, + SPI_BAUD_FPCLK_DIV_256 = 7, +} spi_baud_rate_t; + +typedef enum { + SPI_DATA_SIZE_NOT_USED_0 = 0, + SPI_DATA_SIZE_NOT_USED_1 = 1, + SPI_DATA_SIZE_NOT_USED_2 = 2, + SPI_DATA_SIZE_4_BITS = 3, + SPI_DATA_SIZE_5_BITS = 4, + SPI_DATA_SIZE_6_BITS = 5, + SPI_DATA_SIZE_7_BITS = 6, + SPI_DATA_SIZE_8_BITS = 7, + SPI_DATA_SIZE_9_BITS = 8, + SPI_DATA_SIZE_10_BITS = 9, + SPI_DATA_SIZE_11_BITS = 10, + SPI_DATA_SIZE_12_BITS = 11, + SPI_DATA_SIZE_13_BITS = 12, + SPI_DATA_SIZE_14_BITS = 13, + SPI_DATA_SIZE_15_BITS = 14, + SPI_DATA_SIZE_16_BITS = 15, +} spi_data_size_t; + +typedef __IO struct { + /* spi control register. */ +#define spi_bidimode (1 << 15) /* Bidirectional data mode enable. */ +#define spi_bidioe (1 << 14) /* Output enable in bidirectional mode */ +#define spi_crcen (1 << 13) /* Hardware CRC calculation enable */ +#define spi_crcnext (1 << 12) /* Transmit CRC next */ +#define spi_crcl (1 << 11) /* CRC length */ +#define spi_rxonly (1 << 10) /* Receive only mode enabled. */ +#define spi_ssm (1 << 9) /* Software slave management */ +#define spi_ssi (1 << 8) /* Internal slave select */ +#define spi_lsbfirst (1 << 7) /* Frame format */ +#define spi_spe (1 << 6) /* SPI enable */ +#define spi_br (7 << 3) /* SPI enable */ +#define spi_mstr (1 << 2) /* Master selection */ +#define spi_cpol (1 << 1) /* Clock polarity */ +#define spi_cpha (1 << 0) /* Clock phase */ + uint32_t c_r1; + + /* spi control register #2 */ +#define spi_ldma_tx (1 << 14) /* Last DMA transfer for transmission */ +#define spi_ldma_rx (1 << 13) /* Last DMA transfer for reception */ +#define spi_frxth (1 << 12) /* FIFO reception threshold */ +#define spi_ds (0xF << 8) /* Data size */ +#define spi_txeie (1 << 7) /* Tx buffer empty interrupt enable */ +#define spi_rxneie (1 << 6) /* RX buffer not empty interrupt enable */ +#define spi_errie (1 << 5) /* Error interrupt enable */ +#define spi_frf (1 << 4) /* Frame format */ +#define spi_nssp (1 << 3) /*: NSS pulse management */ +#define spi_ssoe (1 << 2) /* SS output enable */ +#define spi_txdmaen (1 << 1) /* Tx buffer DMA enable */ +#define spi_rxdmaen (1 << 0) /* Rx buffer DMA enable */ + uint32_t c_r2; + + /* spi status register. */ +#define spi_ftlvl (3 << 11) /* Transmisison level */ +#define spi_frlvl (3 << 9) /* Reception level */ +#define spi_fre (1 << 8) /* Frame format error */ +#define spi_bsy (1 << 7) /* Busy flag */ +#define spi_ovr (1 << 6) /* Overrun flag */ +#define spi_modf (1 << 5) /* Mode fault */ +#define spi_crcerr (1 << 4) /* CRC error flag */ +#define spi_txe (1 << 1) /* Transmit buffer empty */ +#define spi_rxne (1 << 0) /* Receive buffer not empty */ + uint32_t s_r; + + /* spi data register. Really only the least-significant 16 bits are used. + * reading from this register reads from the Rx FIFO while writing to it + * writes to the Tx FIFO. */ + __IO uint32_t d_r; + + /* spi CRC polynomial register. */ + uint32_t crcp_r; + + /* spi rx CRC register. */ + uint32_t rxcrc_r; + + /* spi tx CRC register. */ + uint32_t txcrc_r; +} spi_t; + +static_assert(offsetof(spi_t, txcrc_r) == 0x18, "Offset check failed."); + +#endif /* CORE_SPI_H_ */ diff --git a/include/arch/stm32l4xxx/peripherals/system.h b/include/arch/stm32l4xxx/peripherals/system.h new file mode 100644 index 0000000..b6ff0a6 --- /dev/null +++ b/include/arch/stm32l4xxx/peripherals/system.h @@ -0,0 +1,76 @@ +#ifndef CORE_SYSTEM_H_ +#define CORE_SYSTEM_H_ + +#include <stdint.h> +#include "kern/common.h" + +typedef __IO struct { + uint32_t actl_r; /* Auxiliary Control Register, ACTLR on page 4-5 */ + + uint32_t reserved0; + +#define scb_enable (1 << 0) +#define scb_tickint (1 << 1) +#define scb_clksource (1 << 2) +#define scb_countflag (1 << 16) + uint32_t stcs_r; /* SysTick Control and Status Register */ + + uint32_t strv_r; /* SysTick Reload Value Register */ + uint32_t stcv_r; /* SysTick Current Value Register */ + uint32_t stc_r; /* SysTick Calibration Value Register */ + + uint8_t reserved1[3296]; + + uint32_t cpuid; /* CPUID Base Register, CPUID on page 4-5 */ + uint32_t ics_r; /* RO 0x00000000 Interrupt Control and State Register */ + uint32_t vto_r; /* Vector Table Offset Register */ + uint32_t airc_r; /* Application Interrupt and Reset Control Register */ + uint32_t sc_r; /* System Control Register */ + uint32_t cc_r; /* Configuration and Control Register. */ + uint32_t shp_r1; /* System Handler Priority Register 1 */ + uint32_t shp_r2; /* System Handler Priority Register 2 */ + uint32_t shp_r3; /* System Handler Priority Register 3 */ + uint32_t shcs_r; /* System Handler Control and State Register */ + uint32_t cfs_r; /* Configurable Fault Status Registers */ + uint32_t hfs_r; /* HardFault Status register */ + uint32_t dfs_r; /* Debug Fault Status Register */ + uint32_t mmfa_r; /* MemManage Address Registerb */ + uint32_t bfa_r; /* BusFault Address Registerb */ + uint32_t afs_r; /* Auxiliary Fault Status Register, AFSR on page 4-6 */ + uint32_t id_pf_r0; /* Processor Feature Register 0 */ + uint32_t id_pf_r1; /* Processor Feature Register 1 */ + uint32_t id_df_r0; /* Debug Features Register 0 */ + uint32_t id_af_r0; /* Auxiliary Features Register 0 */ + uint32_t id_mmf_r0; /* Memory Model Feature Register 0 */ + uint32_t id_mmf_r1; /* 0x00000000 Memory Model Feature Register 1 */ + uint32_t id_mmf_r2; /* Memory Model Feature Register 2 */ + uint32_t id_mmf_r3; /* Memory Model Feature Register 3 */ + uint32_t id_isa_r0; /* Instruction Set Attributes Register 0 */ + uint32_t id_isa_r1; /* Instruction Set Attributes Register 1 */ + uint32_t id_isa_r2; /* Instruction Set Attributes Register 2 */ + uint32_t id_isa_r3; /* Instruction Set Attributes Register 3 */ + uint32_t id_isa_r4; /* Instruction Set Attributes Register 4 */ + + uint8_t reserved2[20]; + + uint32_t cpac_r; /* Coprocessor Access Control Register */ + + uint8_t reserved3[372]; + + uint32_t sti_r; /* Software Triggered Interrupt Register */ +} system_control_block_t; + +#define ARM_SYSCFG_BASE 0xE000E008 +#define CHECK_OFFSET(member, expected) \ + static_assert(ARM_SYSCFG_BASE + offsetof(system_control_block_t, member) == expected, \ + "Offset check failed") + +CHECK_OFFSET(stcs_r, 0xE000E010); +CHECK_OFFSET(cpuid, 0xE000ED00); +CHECK_OFFSET(cpac_r, 0xE000ED88); +CHECK_OFFSET(id_mmf_r3, 0xE000ED5C); +CHECK_OFFSET(sti_r, 0xE000EF00); + +#define SCB (*(system_control_block_t*)SYSTEM_CONFIG_BLOCK_BASE) + +#endif diff --git a/include/arch/stm32l4xxx/peripherals/tables/stm32l432xx/gpio/afn_table.inc b/include/arch/stm32l4xxx/peripherals/tables/stm32l432xx/gpio/afn_table.inc new file mode 100644 index 0000000..66d347c --- /dev/null +++ b/include/arch/stm32l4xxx/peripherals/tables/stm32l432xx/gpio/afn_table.inc @@ -0,0 +1,100 @@ +AFN(CAN1_RX, 9, PA11) +AFN(CAN1_TX, 9, PA12) +AFN(COMP1_OUT, 12, PA0, 12, PB0, 6, PA11, 6, PA6) +AFN(COMP2_OUT, 12, PA2, 12, PA7, 12, PB5) +AFN(I2C1_SCL, 4, PA9, 4, PB6) +AFN(I2C1_SDA, 4, PA10, 4, PB7) +AFN(I2C1_SMBA, 4, PA14, 4, PA1, 4, PB5) +AFN(I2C3_SCL, 4, PA7) +AFN(I2C3_SDA, 4, PB4) +AFN(IR_OUT, 1, PA13) +AFN(JTCK_SWCLK, 0, PA14) +AFN(JTDI, 0, PA15) +AFN(JTDO_TRACESWO, 0, PB3) +AFN(JTMS_SWDIO, 0, PA13) +AFN(LPTIM1_ETR, 1, PB6) +AFN(LPTIM1_IN1, 1, PB5) +AFN(LPTIM1_IN2, 1, PB7) +AFN(LPTIM1_OUT, 1, PA14) +AFN(LPTIM2_ETR, 14, PA5) +AFN(LPTIM2_IN1, 14, PB1) +AFN(LPTIM2_OUT, 14, PA4, 14, PA8) +AFN(LPUART1_CTS, 8, PA6) +AFN(LPUART1_RTS_DE, 8, PB1) +AFN(LPUART1_RX, 8, PA3) +AFN(LPUART1_TX, 8, PA2) +AFN(MCO, 0, PA8) +AFN(NJTRST, 0, PB4) +AFN(QUADSPI_BK1_IO0, 10, PB1) +AFN(QUADSPI_BK1_IO1, 10, PB0) +AFN(QUADSPI_BK1_IO2, 10, PA7) +AFN(QUADSPI_BK1_IO3, 10, PA6) +AFN(QUADSPI_BK1_NCS, 10, PA2) +AFN(QUADSPI_CLK, 10, PA3) +AFN(SAI1_EXTCLK, 13, PA0, 13, PB0) +AFN(SAI1_FS_A, 13, PA9) +AFN(SAI1_FS_B, 13, PA14, 13, PA4, 13, PB6) +AFN(SAI1_MCLK_A, 13, PA3) +AFN(SAI1_MCLK_B, 13, PB4) +AFN(SAI1_SCK_A, 13, PA8) +AFN(SAI1_SCK_B, 13, PB3) +AFN(SAI1_SD_A, 13, PA10) +AFN(SAI1_SD_B, 13, PA13, 13, PB5) +AFN(SPI1_MISO, 5, PA11, 5, PA6, 5, PB4) +AFN(SPI1_MOSI, 5, PA12, 5, PA7, 5, PB5) +AFN(SPI1_NSS, 5, PA15, 5, PA4, 5, PB0) +AFN(SPI1_SCK, 5, PA1, 5, PA5, 5, PB3) +AFN(SPI3_MISO, 6, PB4) +AFN(SPI3_MOSI, 6, PB5) +AFN(SPI3_NSS, 6, PA15, 6, PA4) +AFN(SPI3_SCK, 6, PB3) +AFN(SWPMI1_IO, 12, PA8) +AFN(SWPMI1_RX, 12, PA14) +AFN(SWPMI1_SUSPEND, 12, PA15) +AFN(SWPMI1_TX, 12, PA13) +AFN(TIM15_BKIN, 14, PA9) +AFN(TIM15_CH1, 14, PA2) +AFN(TIM15_CH1N, 14, PA1) +AFN(TIM15_CH2, 14, PA3) +AFN(TIM16_BKIN, 14, PB5) +AFN(TIM16_CH1, 14, PA6) +AFN(TIM16_CH1N, 14, PB6) +AFN(TIM1_BKIN, 1, PA6) +AFN(TIM1_BKIN2, 2, PA11) +AFN(TIM1_BKIN2_COMP1, 12, PA11) +AFN(TIM1_BKIN_COMP2, 12, PA6) +AFN(TIM1_CH1, 1, PA8) +AFN(TIM1_CH1N, 1, PA7) +AFN(TIM1_CH2, 1, PA9) +AFN(TIM1_CH2N, 1, PB0) +AFN(TIM1_CH3, 1, PA10) +AFN(TIM1_CH3N, 1, PB1) +AFN(TIM1_CH4, 1, PA11) +AFN(TIM1_ETR, 1, PA12) +AFN(TIM2_CH1, 1, PA0, 1, PA15, 1, PA5) +AFN(TIM2_CH2, 1, PA1, 1, PB3) +AFN(TIM2_CH3, 1, PA2) +AFN(TIM2_CH4, 1, PA3) +AFN(TIM2_ETR, 14, PA0, 2, PA15, 2, PA5) +AFN(TSC_G2_IO1, 9, PB4) +AFN(TSC_G2_IO2, 9, PB5) +AFN(TSC_G2_IO3, 9, PB6) +AFN(TSC_G2_IO4, 9, PB7) +AFN(TSC_G3_IO1, 9, PA15) +AFN(USART1_CK, 7, PA8, 7, PB5) +AFN(USART1_CTS, 7, PA11, 7, PB4) +AFN(USART1_RTS_DE, 7, PA12, 7, PB3) +AFN(USART1_RX, 7, PA10, 7, PB7) +AFN(USART1_TX, 7, PA9, 7, PB6) +AFN(USART2_CK, 7, PA4) +AFN(USART2_CTS, 7, PA0) +AFN(USART2_RTS_DE, 7, PA1) +AFN(USART2_RX, 3, PA15, 7, PA3) +AFN(USART2_TX, 7, PA2) +AFN(USART3_CK, 7, PB0) +AFN(USART3_CTS, 7, PA6) +AFN(USART3_RTS_DE, 7, PA15, 7, PB1) +AFN(USB_CRS_SYNC, 10, PA10) +AFN(USB_DM, 10, PA11) +AFN(USB_DP, 10, PA12) +AFN(USB_NOE, 10, PA13) diff --git a/include/arch/stm32l4xxx/peripherals/tables/stm32l432xx/gpio/port_table.inc b/include/arch/stm32l4xxx/peripherals/tables/stm32l432xx/gpio/port_table.inc new file mode 100644 index 0000000..21c7234 --- /dev/null +++ b/include/arch/stm32l4xxx/peripherals/tables/stm32l432xx/gpio/port_table.inc @@ -0,0 +1,26 @@ +PORT(A, 0) +PORT(A, 1) +PORT(A, 2) +PORT(A, 3) +PORT(A, 4) +PORT(A, 5) +PORT(A, 6) +PORT(A, 7) +PORT(A, 8) +PORT(A, 9) +PORT(A, 10) +PORT(A, 11) +PORT(A, 12) +PORT(A, 13) +PORT(A, 14) +PORT(A, 15) +PORT(B, 0) +PORT(B, 1) +PORT(B, 3) +PORT(B, 4) +PORT(B, 5) +PORT(B, 6) +PORT(B, 7) +PORT(C, 14) +PORT(C, 15) +PORT(H, 3) diff --git a/include/arch/stm32l4xxx/peripherals/usart.h b/include/arch/stm32l4xxx/peripherals/usart.h new file mode 100644 index 0000000..a1542f4 --- /dev/null +++ b/include/arch/stm32l4xxx/peripherals/usart.h @@ -0,0 +1,204 @@ +#ifndef H__USART_ +#define H__USART_ + +#include <arch.h> +#include <stdint.h> +#include <stdarg.h> + +#include "kern/common.h" +#include "arch/stm32l4xxx/peripherals/rcc.h" +#include <assert.h> + +#define USART1 (* (usart_t*) USART1_BASE) +#define USART2 (* (usart_t*) USART2_BASE) + +/* + * Possible USART clock sources. + */ +typedef enum { + USART_CLK_SRC_PLK = 0, /* Clock derived from the SysClk. */ + USART_CLK_SRC_SYSCLK = 1, /* System clock. */ + USART_CLK_SRC_HSI16 = 2, /* 16MHz oscillator. */ + USART_CLK_SRC_LSE = 3 /* Low power 32kHz clock. */ +} usart_clk_src_t; + +typedef struct { + /* USART configuration registers 0x04 - 0x0c. */ +#define usart_ue (1 << 0) /* UART enable */ +#define usart_uesm (1 << 1) /* UART enabled in stop mode. */ +#define usart_re (1 << 2) /* reciever enabled. */ +#define usart_te (1 << 3) /* transmitter enabled. */ +#define usart_idleie (1 << 4) /* Idle interrupt enabled. */ +#define usart_rxneie (1 << 5) /* RXNEIE RXNE interrupt enable. */ +#define usart_tcie (1 << 6) +#define usart_txeie (1 << 7) +#define usart_peie (1 << 8) +#define usart_ps (1 << 9) +#define usart_pce (1 << 10) +#define usart_wake (1 << 11) +#define usart_m0 (1 << 12) +#define usart_mme (1 << 13) +#define usart_cmie (1 << 14) +#define usart_over8 (1 << 15) +#define usart_dedt (0xF << 16) +#define usart_deat (0xF << 21) +#define usart_rtoie (1 << 26) +#define usart_eobie (1 << 27) +#define usart_m1 (1 << 28) + __IO uint32_t c_r1; + __IO uint32_t c_r2; + + +#define usart_eie (1 << 0) // Error interrupt enable. +#define usart_iren (1 << 1) // IrDA mode enabled +#define usart_irlp (1 << 2) // IrDA low power +#define usart_hdsel (1 << 3) // Half duplex selection +#define usart_nack (1 << 4) // Smartcard NACK enable +#define usart_scen (1 << 5) // Smartocard mode enable +#define usart_dmar (1 << 6) // DMA enable reciever +#define usart_dmat (1 << 7) // DMA enable transmitter +#define usart_rtse (1 << 8) // RTS enable +#define usart_ctse (1 << 9) // CTS enable +#define usart_ctsie (1 << 10) // CTS interrupt enable +#define usart_onebit (1 << 11) // One sample bit method enable +#define usart_ovrdis (1 << 12) // Overrun disable +#define usart_ddre (1 << 13) // DMA Disable on reception error +#define usart_dem (1 << 14) // Driver enable mode +#define usart_dep (1 << 15) // Driver enable polarity selection +#define usart_scarcnt0 (1 << 17) +#define usart_scarcnt1 (1 << 18) +#define usart_scarcnt2 (1 << 19) +#define usart_wus0 (1 << 20) // Wakeup from STOP mode interrept flag selection +#define usart_wus1 (1 << 21) // Wakeup from STOP mode interrept flag selection +#define usart_wufie (1 << 22) // Wakeup from STOP mode interrup enable +#define usart_ucesm (1 << 23) // USART clock enable in STOP mode. +#define usart_tcbgtie (1 << 24) // Transmission complete before guard time interrupt + __IO uint32_t c_r3; + + /* USART baud rate register. */ + uint32_t br_r; + uint32_t gtp_r; + uint32_t rto_r; + uint32_t rq_r; + + /* USART ISR register. Offset = 0x1c*/ +#define usart_pe (1 << 0) // Parity error +#define usart_fe (1 << 1) // Framing error +#define usart_nf (1 << 2) // START bit noise detection flag. +#define usart_ore (1 << 3) // Overrun error +#define usart_dlie (1 << 4) // Idle line detected +#define usart_rxne (1 << 5) // Read data register not empty +#define usart_tc (1 << 6) // Transmission complete +#define usart_txe (1 << 7) // Transmit data register empty +#define usart_lbdf (1 << 8) // LIN break detection flag +#define usart_ctsif (1 << 9) // CTS interrupt flag +#define usart_cts (1 << 10) // CTS flag. +#define usart_rtof (1 << 11) // Receiever timeout +#define usart_eobf (1 << 12) // End of block flag +#define usart_abre (1 << 14) // Auto baud rate error +#define usart_abrf (1 << 15) // Auto baud rate flag +#define usart_busy (1 << 16) // Busy flag +#define usart_cmf (1 << 17) // Character match flag +#define usart_sbkf (1 << 18) // send break flag +#define usart_rwu (1 << 19) // receiver wakeup frlom mute mode. +#define usart_wuf (1 << 20) // Wakeup from stop mode flag +#define usart_teack (1 << 21) // Transmit enable acknowledge flag. +#define usart_reack (1 << 22) // Receieve enable acknowledge flag. +#define usart_tcbgt (1 << 25) // Transmission completer before guard time completion. + __IO uint32_t is_r; /* Interrupt service register. */ + +#define usart_pecf (1 << 0) // Parity error clear flag +#define usart_fecf (1 << 1) // Framing error clear flag +#define usart_ncf (1 << 2) // Noise detected clear flag +#define usart_orecf (1 << 3) // Overrun error clear flag +#define usart_idlecf (1 << 4) // Idle line detected clear flag +#define usart_tccf (1 << 6) // Transmission complete clear flag +#define usart_tcbgtcf (1 << 7) // Transmission completed before guard time clear flag +#define usart_lbdcf (1 << 8) // LIN break detection clear flag +#define usart_ctscf (1 << 9) // CTS clear flag +#define usart_rtocf (1 << 11) // Receiver timeout clear flag +#define usart_eobcf (1 << 12) // End of block clear flag +#define usart_cmcf (1 << 17) // Character match clear flag +#define usart_wucf (1 << 20) // Wakeup from Stop mode clear flag. + __IO uint32_t ic_r; + uint32_t rd_r; + uint32_t td_r; +} usart_t; + +static_assert(offsetof(usart_t, ic_r) == 0x20, "Offset assertion failed."); +static_assert(offsetof(usart_t, rd_r) == 0x24, "Offset assertion failed."); + +typedef enum { + OVERSAMPLE_8, + OVERSAMPLE_16 +} oversampling_mode_t; + +static inline void usart_set_divisor( + __IO usart_t* usart, + uint32_t usartdiv) +{ + if (usart->c_r1 & (1 << 15)) { + /* OVER8 is set. */ + usart->br_r = + (usartdiv & ~7) | + ((usartdiv & 7) >> 1); + } else { + /* OVER8 is not set. */ + usart->br_r = usartdiv; + } +} + +static inline void usart_set_oversampling_mode( + __IO usart_t* usart, + oversampling_mode_t mode) +{ + if (mode == OVERSAMPLE_8) { + usart->c_r1 |= 1 << 15; + } else { + usart->c_r1 &= ~(1 << 15); + } +} + +typedef enum { + USART_PARITY_DISABLED = 0, + USART_PARITY_EVEN = 2 << 9, + USART_PARITY_ODD = 3 << 9, +} usart_parity_t; + +typedef enum { + USART_ENABLE_TX = 0x02, + USART_ENABLE_RX = 0x01, + USART_ENABLE_DISABLED = 0x00, +} usart_enable_t; + +void usart_set_parity(__IO usart_t* usart, usart_parity_t parity); + +void usart_set_enabled(__IO usart_t* usart, usart_enable_t enabled); + +void usart_enable_dma(__IO usart_t* usart, usart_enable_t enabled); + +/* + * Send a byte on the usart, This command blocks until the data + * is fully sent. + */ +void usart_transmit_byte_sync(__IO usart_t* usart, uint8_t byte); + +void set_usart1_clock_src(__IO rcc_t* rcc, usart_clk_src_t usart_clk_src); + +void set_usart1_clock_enabled(__IO rcc_t* rcc, bool enable); + +void set_usart2_clock_src(__IO rcc_t* rcc, usart_clk_src_t usart_clk_src); + +void set_usart2_clock_enabled(__IO rcc_t* rcc, bool enable); + +void usart_transmit_bytes_sync( + __IO usart_t* usart, const uint8_t* bytes, uint32_t n); + +void usart_transmit_str_sync(__IO usart_t* usart, const char* str); + +void usart_printf(__IO usart_t* usart, const char* fmt, ...); + +void usart_vprintf(__IO usart_t* usart, const char* fmt, va_list l); + + +#endif /* H__USART_ */ diff --git a/include/arch/x86_64/arch.h b/include/arch/x86_64/arch.h new file mode 100644 index 0000000..c17721d --- /dev/null +++ b/include/arch/x86_64/arch.h @@ -0,0 +1,37 @@ +#ifndef ARCH_H_ +#define ARCH_H_ + +#include "fake_env.h" + +#define ARCH_PC +#define enable_all_interrupts() do {} while(0) + +#define RCC_BASE (load_fake_rcc__()) + +#define DMA1_BASE (load_fake_ahb1__() + 0x0) +#define DMA2_BASE (load_fake_ahb1__() + 0x400) + +#define USART1_BASE (load_fake_apb2__() + 0x3800) +#define USART2_BASE (load_fake_apb1__() + 0x4400) + +#define GPIOA_BASE (load_fake_ahb2__() + 0x0) +#define GPIOB_BASE (load_fake_ahb2__() + 0x400) +#define GPIOC_BASE (load_fake_ahb2__() + 0x800) +#define GPIOH_BASE (load_fake_ahb2__() + 0x1C00) + +#define SRAM1_BASE (load_fake_sram1__() + 0x0) +#define SRAM2_BASE (load_fake_sram2__() + 0x0) + +#define SYSTEM_CONFIG_BLOCK_BASE (load_fake_scb__()) +#define NVIC_BASE (load_fake_nvic__()) + +#define SPI1_BASE (load_fake_spi1__()) +#define SPI3_BASE (load_fake_spi3__()) + +// Pretend there's a data segement at the start of SRAM1 for more accurate +// testing. +#define GHOST_DATA_SEGMENT_SIZE 1234 +#define DATA_SEGMENT_START (*((uint8_t*)SRAM1_BASE)) +#define DATA_SEGMENT_STOP (*(((uint8_t*)SRAM1_BASE) + GHOST_DATA_SEGMENT_SIZE)) + +#endif /* ARCH_H_ */ diff --git a/include/kern/common.h b/include/kern/common.h new file mode 100644 index 0000000..653279e --- /dev/null +++ b/include/kern/common.h @@ -0,0 +1,50 @@ +#ifndef COMMON__H +#define COMMON__H + +#include <stdint.h> +#include <stddef.h> +#include <assert.h> + +#define WEAK __attribute__((weak)) +#define NORETURN __attribute__((noreturn)) + +#ifndef static_assert +#define static_assert(a, b) +#endif + +/* Define __IO to be volatile if it's not already. */ +#ifndef __IO +#define __IO volatile +#endif + +#define CTZ(n) __builtin_ctz(n) + +#define bool int +#ifndef __cplusplus +#define true 1 +#define false 0 +#endif + +#define PACKED __attribute__((packed)) +#define BIT(n) (1 << (n)) + +#define RESERVED_CONCAT_IMPL(x, y) x ## y +#define RESERVED_MACRO_CONCAT(x, y) RESERVED_CONCAT_IMPL(x, y) +#define RESERVED(n) \ + bits_t RESERVED_MACRO_CONCAT(_r, __COUNTER__) :n + +#define RESERVE(type) \ + __IO type RESERVED_MACRO_CONCAT(_r, __COUNTER__) + +#define ptr2reg(ptr) \ + ((uint32_t) (ptrdiff_t) (ptr)) + +typedef __IO uint32_t bits_t; + +#define regset(reg, mask, val) \ + ((reg) = ((reg) & ~mask) | (val << CTZ(mask))) + +#define regget(reg, mask) \ + (((reg) & mask) >> (CTZ(mask))) + +#endif /* COMMON_H */ diff --git a/include/kern/delay.h b/include/kern/delay.h new file mode 100644 index 0000000..65a26d6 --- /dev/null +++ b/include/kern/delay.h @@ -0,0 +1,12 @@ +#ifndef H__DELAY__ +#define H__DELAY__ + +#include <stdint.h> + +/* + * Loops and count-downs the delay, the time this takes depends on the speed + * of the clock. + */ +void delay(uint32_t delay); + +#endif /* H__DELAY__ */ diff --git a/include/kern/dma/dma_manager.h b/include/kern/dma/dma_manager.h new file mode 100644 index 0000000..0d17bd5 --- /dev/null +++ b/include/kern/dma/dma_manager.h @@ -0,0 +1,279 @@ +#ifndef PERI_DMA_H_ +#define PERI_DMA_H_ + +#include "kern/common.h" +#include "arch/stm32l4xxx/peripherals/dma.h" /* Access to the DMA registers. */ +#include "arch/stm32l4xxx/peripherals/irq.h" + +#define DMA_ERROR_CHANNEL_IN_USE 1 + +#define CAT2(x, y) x ## y +#define CAT1(v, c) CAT2(v, c) +#define DMA_RESERVED(dma) CAT1(dma ## _PERIPH_RESERVED, __COUNTER__) + +#define ALTERNATE0 0x0000 +#define ALTERNATE1 0x0100 +#define ALTERNATE2 0x0200 +#define ALTERNATE3 0x0300 + +#define DMA_N_CHANNELS 7 +typedef enum { + DMA1_PERIPH_ADC1 = 0, + DMA1_PERIPH_ADC2 = 1, + DMA1_PERIPH_ADC3 = 2, + DMA1_PERIPH_DFSDM1_FLT0 = 3, + DMA1_PERIPH_DFSDM1_FLT1 = 4, + DMA1_PERIPH_DFSDM1_FLT2 = 5, + DMA1_PERIPH_DFSDM1_FLT3 = 6, + + DMA_RESERVED(DMA1) = 7, + DMA1_PERIPH_SPI1_RX = 8, + DMA1_PERIPH_SPI1_TX = 9, + DMA1_PERIPH_SPI2_RX = 10, + DMA1_PERIPH_SPI2_TX = 11, + DMA1_PERIPH_SAI2_A = 12, + DMA1_PERIPH_SAI2_B = 13, + + DMA_RESERVED(DMA1) = 14, + DMA1_PERIPH_USART3_TX = 15, + DMA1_PERIPH_USART3_RX = 16, + DMA1_PERIPH_USART1_TX = 17, + DMA1_PERIPH_USART1_RX = 18, + DMA1_PERIPH_USART2_RX = 19, + DMA1_PERIPH_USART2_TX = 20, + + DMA_RESERVED(DMA1) = 21, + DMA1_PERIPH_I2C3_TX = 22, + DMA1_PERIPH_I2C3_RX = 23, + DMA1_PERIPH_I2C2_TX = 24, + DMA1_PERIPH_I2C2_RX = 25, + DMA1_PERIPH_I2C1_TX = 26, + DMA1_PERIPH_I2C1_RX = 27, + + DMA1_PERIPH_TIM2_CH3 = 28, + DMA1_PERIPH_TIM2_UP = 29, + DMA1_PERIPH_TIM16_CH1_1 = 30 | ALTERNATE0, + DMA1_PERIPH_TIM16_UP_1 = 30 | ALTERNATE1, /* Same as TIM16_CH1. */ + DMA_RESERVED(DMA1) = 31, + DMA1_PERIPH_TIM2_CH1 = 32, + DMA1_PERIPH_TIM16_CH1_2 = 33, + DMA1_PERIPH_TIM16_UP_2 = 33 | ALTERNATE1, /* Same as TIM16_CH1. */ + DMA1_PERIPH_TIM2_CH2 = 34, + DMA1_PERIPH_TIM2_CH4 = 34 | ALTERNATE1, /* Same as TIM2_CH2. */ + + + DMA1_PERIPH_TIM17_CH1_1 = 35, + DMA1_PERIPH_TIM17_UP_1 = 35 | ALTERNATE1, /* Same as TIM17_CH1 */ + DMA1_PERIPH_TIM3_CH3 = 36, + DMA1_PERIPH_TIM3_CH4 = 37, + DMA1_PERIPH_TIM3_UP = 37 | ALTERNATE1, /* Same as TIM3_CH4 */ + DMA1_PERIPH_TIM7_UP = 38, + DMA1_PERIPH_DAC_CH2 = 38 | ALTERNATE1, /* Same as TIM7_UP */ + DMA1_PERIPH_QUADSPI = 39, + DMA1_PERIPH_TIM3_CH1 = 40, + DMA1_PERIPH_TIM3_TRIG = 40 | ALTERNATE1, /* Same as TIM3_CH1 */ + DMA1_PERIPH_TIM17_CH1_2 = 41, + DMA1_PERIPH_TIM17_UP_2 = 41 | ALTERNATE1, /* Same as TIM17_CH1 */ + + DMA1_PERIPH_TIM4_CH1 = 42, + DMA_RESERVED(DMA1) = 43, + DMA1_PERIPH_TIM6_UP = 44, + DMA1_PERIPH_DAC_CH1 = 44 | ALTERNATE1, /* Same as TIM6_UP */ + DMA1_PERIPH_TIM4_CH2 = 45, + DMA1_PERIPH_TIM4_CH3 = 46, + DMA_RESERVED(DMA1) = 47, + DMA1_PERIPH_TIM4_UP = 48, + + DMA_DMA1_PERIHP_RESERVED5 = 49, + DMA1_PERIPH_TIM1_CH1 = 50, + DMA1_PERIPH_TIM1_CH2 = 51, + DMA1_PERIPH_TIM1_CH4 = 52, + DMA1_PERIPH_TIM1_TRIG = 52 | ALTERNATE1, /* Same as TIM1_TRIG */ + DMA1_PERIPH_TIM1_COM = 52 | ALTERNATE2, /* Same as TIM1_TRIG */ + DMA1_PERIPH_TIM15_CH1 = 53, + DMA1_PERIPH_TIM15_UP = 53 | ALTERNATE1, /* Same as TIM15_CH1 */ + DMA1_PERIPH_TIM15_TRIG = 53 | ALTERNATE2, /* Same as TIM15_CH1 */ + DMA1_PERIPH_TIM15_COM = 53 | ALTERNATE3, /* Same as TIM15_CH1 */ + DMA1_PERIPH_TIM1_UP = 54, + DMA1_PERIPH_TIM1_CH3 = 55, + + DMA2_DMA1_SWITCH__ = 56, + + DMA2_PERIPH_I2C4_RX = 56, + DMA2_PERIPH_I2C4_TX = 57, + DMA2_PERIPH_ADC1 = 58, + DMA2_PERIPH_ADC2 = 59, + DMA2_PERIPH_ADC3 = 60, + DMA2_PERIPH_DCMI_1 = 61, + DMA_RESERVED(DMA2) = 62, + + DMA2_PERIPH_SAI1_A_1 = 63, + DMA2_PERIPH_SAI1_B_1 = 64, + DMA2_PERIPH_SAI2_A = 65, + DMA2_PERIPH_SAI2_B = 66, + DMA_RESERVED(DMA2) = 67, + DMA2_PERIPH_SAI1_A_2 = 68, + DMA2_PERIPH_SAI1_B_2 = 69, + + DMA2_PERIPH_UART5_TX = 70, + DMA2_PERIPH_UART5_RX = 71, + DMA2_PERIPH_UART4_TX = 72, + DMA_RESERVED(DMA2) = 73, + DMA2_PERIPH_UART4_RX = 74, + DMA2_PERIPH_USART1_TX = 75, + DMA2_PERIPH_USART1_RX = 76, + + DMA2_PERIPH_SPI3_RX = 77, + DMA2_PERIPH_SPI3_TX = 78, + DMA_RESERVED(DMA2) = 79, + DMA2_PERIPH_TIM6_UP = 80, + DMA2_PERIPH_DAC_CH1 = 80 | ALTERNATE1, /* Same as TIM6_UP */ + DMA2_PERIPH_TIM7_UP = 81, + DMA2_PERIPH_DAC_CH2 = 81 | ALTERNATE1, /* Same as TIM7_UP */ + DMA_RESERVED(DMA2) = 82, + DMA2_PERIPH_QUADSPI = 83, + + DMA2_PERIPH_SWPMI1_RX = 84, + DMA2_PERIPH_SWPMI1_TX = 85, + DMA2_PERIPH_SPI1_RX = 86, + DMA2_PERIPH_SPI1_TX = 87, + DMA2_PERIPH_DCMI_2 = 88, + DMA2_PERIPH_LPUART1_TX = 89, + DMA2_PERIPH_LPUART1_RX = 90, + + + DMA2_PERIPH_TIM5_CH4 = 91, + DMA2_PERIPH_TIM5_TRIG = 91 | ALTERNATE1, /* Same as TIM5_CH4 */ + DMA2_PERIPH_TIM5_CH3 = 92, + DMA2_PERIPH_TIM5_UP = 92 | ALTERNATE1, /* Same as TIM5_CH3 */ + DMA_RESERVED(DMA2) = 93, + DMA2_PERIPH_TIM5_CH2 = 94, + DMA2_PERIPH_TIM5_CH1 = 95, + DMA2_PERIPH_I2C1_RX = 96, + DMA2_PERIPH_I2C1_TX = 97, + + DMA2_PERIPH_AES_IN_1 = 98, + DMA2_PERIPH_AES_OUT_1 = 99, + DMA2_PERIPH_AES_OUT_2 = 100, + DMA_RESERVED(DMA2) = 101, + DMA2_PERIPH_AES_IN_2 = 102, + DMA_RESERVED(DMA2) = 103, + DMA2_PERIPH_HASH_IN = 104, + + DMA2_PERIPH_TIM8_CH3 = 105, + DMA2_PERIPH_TIM8_UP = 105 | ALTERNATE1, /* Same as TIM8_CH3 */ + DMA2_PERIPH_TIM8_CH4 = 106, + DMA2_PERIPH_TIM8_TRIG = 106 | ALTERNATE1, /* Same as TIM8_CH4 */ + DMA2_PERIPH_TIM8_COM = 106 | ALTERNATE2, /* Same as TIM8_CH4 */ + DMA_RESERVED(DMA2) = 107, + DMA2_PERIPH_SDMMC1_1 = 108, + DMA2_PERIPH_SDMMC1_2 = 109, + DMA2_PERIPH_TIM8_CH1 = 110, + DMA2_PERIPH_TIM8_CH2 = 111, + + + DMA_PERIPH_SENTINEL, +} dma_peripheral_t; + + +/* Defines a DMA channel. */ +typedef struct { + uint8_t dma; /* 0 = DMA1, 1 = DMA2 */ + uint8_t chan; /* 0 - 6 */ +} dma_channel_t; + + +/* + * Defines a DMA channel allocated for memory-to-peripheral transfers. This + * structure is only nominally different from dma_channel_t in order to provide + * rudimentary type-checking. + */ +typedef struct { + dma_channel_t c_; +} dma_mem2p_channel_t; + +/* + * Defines a DMA channel allocated for peripheral-to-memory transfers. This + * structure is only nominally different from dma_channel_t in order to provide + * rudimentary type-checking. + */ +typedef struct { + dma_channel_t c_; +} dma_p2mem_channel_t; + +/* Defines a DMA channel allocated for mem2mem transfers. + * This structure is only nominally different from dma_channel_t + * in order to provide rudimentary type-checking. + */ +typedef struct { + dma_channel_t c_; +} dma_mem2mem_channel_t; + +#define DMA_CHAN_ERROR ((dma_channel_t) { .dma = 0xff, .chan = 0xff }) + +typedef struct { + bool transfer_complete_interrupt_enable; + bool half_transfer_interrupt_enable; + bool transfer_error_interrupt_enable; + + bool circular_mode; + bool peripheral_increment; + bool memory_increment; + + dma_size_t peripheral_block_size; + dma_size_t memory_block_size; + + dma_priority_level_t priority; +} dma_opts_t; + +#define DEFAULT_DMA_OPTS \ + ((dma_opts_t) { .memory_increment = 1, \ + .peripheral_increment = 0, \ + .transfer_complete_interrupt_enable = 0, \ + .half_transfer_interrupt_enable = 0, \ + .transfer_error_interrupt_enable = 0, \ + .circular_mode = 0, \ + .peripheral_block_size = DMA_SIZE_8_BITS, \ + .memory_block_size = DMA_SIZE_8_BITS, \ + .priority = DMA_PRIORITY_LEVEL_MEDIUM }) + +dma_p2mem_channel_t select_dma_channel_p2mem( + dma_peripheral_t peripheral, + dma_opts_t* opts_in, + int* error); + +dma_mem2p_channel_t select_dma_channel_mem2p( + dma_peripheral_t peripheral, + dma_opts_t* opts_in, + int* error); + +/* Returns a dma channel used for memory-to-memory transfers. + * + * channel - the channel this dma should use. The channel should + * be on the range [0-13]. The channels [0-6] refer to the 7 channels + * on DMA1, where channels [7-13] refer to the 7 channels on DMA2. + * + * If `channel` is -1, then the highest unused dma channel is selected. + */ +dma_mem2mem_channel_t select_dma_channel_mem2mem( + int channel, + dma_opts_t* opts, + int* error_out); + +void dma_mem2p_initiate_transfer( + dma_mem2p_channel_t chan, const void* from_loc, uint16_t nblocks); + +void dma_p2mem_initiate_transfer( + dma_p2mem_channel_t chan, void* to_loc, uint16_t nblocks); + +void dma_mem2mem_initiate_transfer( + dma_mem2mem_channel_t chan, + void* to_loc, + const void* from_loc, + uint16_t nblocks); + +void release_dma_channel(dma_channel_t chan); + +interrupt_t dma_channel_get_interrupt(dma_channel_t chan); + +#endif diff --git a/include/kern/gpio/gpio_manager.h b/include/kern/gpio/gpio_manager.h new file mode 100644 index 0000000..922a423 --- /dev/null +++ b/include/kern/gpio/gpio_manager.h @@ -0,0 +1,187 @@ +#ifndef KERN_GPIO_GPIO_MANAGE_H_ +#define KERN_GPIO_GPIO_MANAGE_H_ + +#include "kern/common.h" +#include "arch/stm32l4xxx/peripherals/gpio.h" + +#define GPIO_ERROR_IN_USE 1 +#define GPIO_ERROR_INVALID_PIN_FOR_ALTERNATE_FUNCTION 2 +#define GPIO_ERROR_INVALID_PIN 3 + +typedef enum { +/* Creates vaules GPIO_PIN_<port><num> i.e. GPIO_PIN_A0 */ +#define PORT(p, pn) \ + GPIO_PIN_P ## p ## pn, +#include "arch/stm32l4xxx/peripherals/tables/stm32l432xx/gpio/port_table.inc" +#undef PORT + + N_GPIO_PINS +} gpio_pin_t; + +/* Alternate functions. */ +typedef enum { +#define AFN(fn, ...) \ + GPIO_ALTERNATE_FUNCTION_ ## fn, +#include "arch/stm32l4xxx/peripherals/tables/stm32l432xx/gpio/afn_table.inc" +#undef AFN + GPIO_ALTERNATE_FUNCTION_EVENTOUT, +} gpio_alternate_function_t; + +#define gpio_pin_for_alternate_function(af) ((af) / 16) +#define gpio_pin_out_of_range(pin) \ + ((pin) < 0 || (pin) >= N_GPIO_PINS) + +typedef enum { + GPIO_PORT_A, + GPIO_PORT_B, + GPIO_PORT_C, + GPIO_PORT_D, + GPIO_PORT_E, + GPIO_PORT_F, + GPIO_PORT_G, + GPIO_PORT_H, + GPIO_PORT_I, + + N_GPIO_PORTS, +} gpio_port_t; + +typedef enum { + GPIO_MODE_INPUT, + GPIO_MODE_OUTPUT, + GPIO_MODE_ALTERNATE, + GPIO_MODE_ANALOG +} gpio_mode_t; + +/* + * Enum defining the pin speeds that are possible. + */ +typedef enum { + SPEED_2MHZ = 0, + SPEED_10MHZ = 1, + SPEED_50MHZ = 3, +} gpio_speed_t; + +typedef enum { + GPIO_OUTPUT_TYPE_PUSH_PULL, + GPIO_OUTPUT_TYPE_OPEN_DRAIN +} gpio_output_type_t; + +typedef enum { + GPIO_OUTPUT_SPEED_LOW, + GPIO_OUTPUT_SPEED_MEDIUM, + GPIO_OUTPUT_SPEED_HIGH, + GPIO_OUTPUT_SPEED_VERY_HIGH, +} gpio_output_speed_t; + +typedef enum { + GPIO_PULL_DIR_NONE, + GPIO_PULL_DIR_UP, + GPIO_PULL_DIR_DOWN, +} gpio_pull_dir_t; + +/* Returns the appropriate gpio_port for the provided pin. */ +inline static gpio_port_t get_port_for_pin(gpio_pin_t pin) +{ + switch (pin) { +#define PORT(p, pn) \ + case GPIO_PIN_P ## p ## pn: return GPIO_PORT_ ## p; +#include "arch/stm32l4xxx/peripherals/tables/stm32l432xx/gpio/port_table.inc" +#undef PORT + case N_GPIO_PINS: return N_GPIO_PORTS; + } + + /* Should be unreachable. */ +} + +#define DEFAULT_GPIO_OPTS_OUTPUT \ + (gpio_pin_opts_t) { \ + .mode = GPIO_MODE_OUTPUT, \ + .pull_dir = GPIO_PULL_DIR_DOWN, \ + .output_opts.speed = GPIO_OUTPUT_SPEED_MEDIUM, \ + .output_opts.type = GPIO_OUTPUT_TYPE_PUSH_PULL, \ + } + +#define DEFAULT_GPIO_OPTS_INPUT \ + (gpio_pin_opts_t) { \ + .mode = GPIO_MODE_OUTPUT, \ + .pull_dir = GPIO_PULL_DIR_DOWN, \ + } + +typedef struct { + gpio_mode_t mode; + gpio_pull_dir_t pull_dir; + + union { + struct { + } input_opts; + + struct { + gpio_output_speed_t speed; + gpio_output_type_t type; + } output_opts; + + struct { + uint8_t function; + } alternate_opts; + + struct { + } analog_opts; + }; +} gpio_pin_opts_t; + +/* Differentiates at compile-time from the a gpio_pin_t enum value and a pin + * that's been reserved. */ +typedef struct { + gpio_pin_t v_; +} gpio_reserved_pin_t; + +/* Returns a pointer to the GPIO pin bus and offset. This is useful for when + * raw access to the values are needed. I.e. time critical applications. */ +void get_gpio_pin_port_off( + gpio_pin_t pin, gpio_port_config_t** out_cfg, int* out_off); + +/* Sets the given GPIO pin to high. */ +void set_gpio_pin_high(gpio_reserved_pin_t pin); + +/* Sets the given GPIO pin to low. */ +void set_gpio_pin_low(gpio_reserved_pin_t pin); + +/** returns true if a GPIO pin is in use. */ +bool gpio_pin_in_use(gpio_pin_t pin); + +/* + * Reserve the provided GPIO pin using the opts provided. + * + * sets error_out to GPIO_ERROR_IN_USE if the GPIO pin could not be reserved + * because it already has been reserved. + * + * The function will automatically enable the correct GPIO port bus. + */ +gpio_reserved_pin_t reserve_gpio_pin( + gpio_pin_t pin, gpio_pin_opts_t* opts, int* error_out); + +/* Enables and returns the pin reserved for the alternate function. + * + * If the `hint` parameter is defined (non -1) the manager will try + * to reserve that pin for the alternate function and fail if it can't. + * + * If `hint` is -1 then the first available pin for that alternate function + * will be reserved and returned. + * + * + */ +gpio_reserved_pin_t gpio_enable_alternate_function( + gpio_alternate_function_t fn, + gpio_pin_t hint, + int* error_out); + +/* + * Releases the GPIO pin so it can be reserved again in the future. + * + * The pin is reset during this process and if there are no more reserved pins + * on the corresponding port this function will disable the port. (last one out + * gets the lights.). + */ +void release_gpio_pin(gpio_reserved_pin_t gpio_pin); + +#endif /* KERN_GPIO_GPIO_MANAGE_H_ */ diff --git a/include/kern/gpio/sysled.h b/include/kern/gpio/sysled.h new file mode 100644 index 0000000..b2c9056 --- /dev/null +++ b/include/kern/gpio/sysled.h @@ -0,0 +1,11 @@ +/* + * Headers for interacting and managing the system LED. + */ +#ifndef SYSLED_H_ +#define SYSLED_H_ + +#include "kern/gpio/gpio_manager.h" + +gpio_reserved_pin_t get_sysled(); + +#endif diff --git a/include/kern/init.h b/include/kern/init.h new file mode 100644 index 0000000..737b85f --- /dev/null +++ b/include/kern/init.h @@ -0,0 +1,67 @@ +#ifndef INIT_H_ +#define INIT_H_ + +/** Globals annotated with _no_init will not be set during init1 bootup + * where the data segement is loaded from flash and the bss segment is + * cleared. + * + * This is useful for routines that run in the init0 boot procedure + * that need persistent globals. + * + * Note that initializing a global annotated with _no_init will have + * no effect as the variable will remain uninitialized until explicitly + * set by by the program. + */ +#define _no_init \ + __attribute((__section__(".noinit"))) + +#define init0 \ + static void init0fn(); \ + static __attribute((__section__(".init0"))) \ + __attribute((__used__)) \ + void(*init0_ptr)() = init0fn; \ + static void init0fn +#define init1 \ + static void init1fn(); \ + static __attribute((__section__(".init1"))) \ + __attribute((__used__)) \ + void(*init1_ptr)() = init1fn; \ + static void init1fn +#define init2 \ + static void init2fn(); \ + static __attribute((__section__(".init2"))) \ + __attribute((__used__)) \ + void(*init2_ptr)() = init2fn; \ + static void init2fn +#define init3 \ + static void init3fn(); \ + static __attribute((__section__(".init3"))) \ + __attribute((__used__)) \ + void(*init3_ptr)() = init3fn; \ + static void init3fn +#define init4 \ + static void init4fn(); \ + static __attribute((__section__(".init4"))) \ + __attribute((__used__)) \ + void(*init4_ptr)() = init4fn; \ + static void init4fn +#define init5 \ + static void init5fn(); \ + static __attribute((__section__(".init5"))) \ + __attribute((__used__)) \ + void(*init5_ptr)() = init5fn; \ + static void init5fn +#define init6 \ + static void init6fn(); \ + static __attribute((__section__(".init6"))) \ + __attribute((__used__)) \ + void(*init6_ptr)() = init6fn; \ + static void init6fn +#define init7 \ + static void init7fn(); \ + static __attribute((__section__(".init7"))) \ + __attribute((__used__)) \ + void(*init7_ptr)() = init7fn; \ + static void init7fn + +#endif /* INIT_H_ */ diff --git a/include/kern/lib.h b/include/kern/lib.h new file mode 100644 index 0000000..be0e8e9 --- /dev/null +++ b/include/kern/lib.h @@ -0,0 +1,10 @@ +#ifndef LIB_H_ +#define LIB_H_ + +#include <stdint.h> + +void hexify(uint32_t v, char* into); + +void decimalify(int v, char* into); + +#endif diff --git a/include/kern/log.h b/include/kern/log.h new file mode 100644 index 0000000..5e49def --- /dev/null +++ b/include/kern/log.h @@ -0,0 +1,12 @@ +#ifndef LOG_H_ +#define LOG_H_ + +/* + * Defines logging capabilities. This logging unit will enable logging on + * the systems main USART output. + */ + +/** Similar to fprintf, but with a stripped-down format-string DSL. */ +void klogf(const char* fmt, ...); + +#endif diff --git a/include/kern/mem.h b/include/kern/mem.h new file mode 100644 index 0000000..c0999f5 --- /dev/null +++ b/include/kern/mem.h @@ -0,0 +1,32 @@ +#ifndef MEM_H_ +#define MEM_H_ + +#include "arch.h" +#include <stddef.h> + +#define DATA_SEGMENT_STOP_ADDR ((uint8_t*) &DATA_SEGMENT_STOP) +#define DATA_SEGMENT_START_ADDR ((uint8_t*) &DATA_SEGMENT_START) + +#define MAX_HEAP_SIZE \ + ((16384 - (DATA_SEGMENT_STOP_ADDR - DATA_SEGMENT_START_ADDR)) / 4 * 4) + +/* allocates memory on the head, which is stored in sram2 */ +void* halloc(size_t n); + +/* Frees the memory allocated by halloc. */ +void hfree(void* mem); + +#ifdef FOR_TESTING + +void* debug_halloc_get_next_ptr(void* ptr); + +void* debug_halloc_get_prev_ptr(void* ptr); + +int debug_halloc_assert_consistency(char* error, size_t len); + +void debug_print_blocks(); + +#endif + + +#endif diff --git a/include/kern/string.h b/include/kern/string.h new file mode 100644 index 0000000..3c9f0b4 --- /dev/null +++ b/include/kern/string.h @@ -0,0 +1,6 @@ +#ifndef STRING_H_ +#define STRING_H_ + +void kstrcpy(char* into, const char* from); + +#endif /* STRING_H_ */ |