1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
|
#include "arch.h"
#include "core/clock.h"
#include "core/dma.h"
#include "core/gpio.h"
#include "core/system.h"
#include "core/usart.h"
#include "delay.h"
#include "mem.h"
#include "spin.h"
#include "string.h"
/** Overrides the default systick irq handler. */
void on_systick()
{
static int is_on = 0;
__IO gpio_port_t* port_b = enable_gpio(GPIO_PORT_B);
gpio_output_pin_t pin3 = set_gpio_pin_output(port_b, PIN_3);
if (is_on) {
pin_off(pin3);
} else {
pin_on(pin3);
}
is_on = ! is_on;
}
void setup_usart2(uint32_t baud_rate)
{
__IO gpio_port_t* port_a = enable_gpio(GPIO_PORT_A);
enable_hsi(&RCC, true);
set_usart2_clock_src(&RCC, USART_CLK_SRC_HSI16);
set_usart2_clock_enabled(&RCC, USART_CLK_SRC_HSI16);
set_gpio_pin_mode(port_a, PIN_2, MODE_ALTERNATE);
set_gpio_pin_mode(port_a, PIN_15, MODE_ALTERNATE);
set_gpio_alternate_function(port_a, PIN_2, AFN_7);
set_gpio_alternate_function(port_a, PIN_15, AFN_3);
/* De-assert reset of USART2 */
regset(RCC.apb1rst1_r, rcc_usart2rst, 0);
USART2.c_r1 = 0;
USART2.c_r2 = 0;
USART2.c_r3 = 0;
usart_set_divisor(&USART2, 16000000 / baud_rate);
}
#ifdef ARCH_STM32L4
/* Main function. This gets executed from the interrupt vector defined above. */
int main()
{
/* Enable a higher clock frequency. */
set_system_clock_MHz(80);
setup_usart2(115200);
usart_set_enabled(&USART2, USART_ENABLE_TX | USART_ENABLE_RX);
usart_printf(&USART2, "Start Configuring Countdown!\n");
/* Set the countdown to start from 1,000,0000. */
SCB.strv_r = 10000000;
/* Enable interrupts. */
regset(SCB.stcs_r, scb_tickint, 1);
/* Start the systick. */
regset(SCB.stcs_r, scb_enable, 1);
usart_printf(&USART2, "Start Countdown Started!\n");
}
#endif
|
